Reviews3 5inch Touch Screen Tft

DIYmalls 3.2 inch TFT Shield LCD Display Module 400x240 ILI9327 Resistive Touch Screen 5V onboard Temperature Sensor for Arduino UNO R3 Mega 2560

This 3.2 tft lcd display has 32 pin interface onboard, so connecting with uno r3 and mega 2560 is easy..
Onboard SD card slot help to use 3.2 inch touch screen more conveniently..
You will receive 1pcs resistive touch screen and 1pcs touch pen..
If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....

High speed SPI display with digital I2C touchscreen driver.
Single-touch capacitive touch bonded on top.
240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer.
We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller.
Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT.
Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4.
That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD.

Rockville RDD7 7" Touchscreen Double DIN DVD/USB/SD Receiver with Bluetooth..
7" High Resolution TFT-LCD Digital Touch Screen. 800 x 480 Screen Resolution. Selectable backgrounds. 16:9 (Wide Screen) or 4:3 (Letterbox) Switchable Aspect Ratio..
Bluetooth Capability for Hands Free with Phonebook and ADP2. iPod, iPod Touch, and iPhone (4S to 6S) integration via USB. Supports iPhone charging. Pandora/Spotify integration with iPhone via USB..
Front AUX / MP3 Input. High Power Output: 4 x 50W Built-i Amplifier (4 x 18w RMS). 3 Sets of 5V Preamp Outputs (Front, Rear, and Sub). 300:1 Contrast Resolution..
Picture Control: Brightness / Contrast / Saturation / Hue / Definition. PAL / NTSC Compatible. Plays DVD/DVD+R/DVD-R/DVD+RW/DVD-RW/VCD/SVCD/CD/CD+R/CD-R/CD-RW/CD+RW/MP3/MP4/ Divx5.0/ID3..

7inch DSI LCD,7inch TFT screen. 800x480 hardware resolution.
Capacitive touch panel, support 5-point touch.
Supports Pi 4B/3B+/3A+/3B/2B/B+/A+ and Compute Module 4/3+/3,but Compute Module 4/3+/3 requires extra adapter board.
Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free..
DSI interface, refresh rate up to 60Hz. Support backlight adjusts by software..

Compatible With: For Nintendo DS Lite Or Resistive TFT Touch Screen. For Arudino TFT Screen..
Keep your screen free from scratches and fingerprints..
Easily snaps inside a convenient storage slot on the back..

【5'' Bigger HD IPS Screen & Clearer 】--- The advantages of the new generation IPS screen: 1. The 5inch big screen is larger than other industrial endoscope. 2. IPS screen offers 178° wide view angle, the screen always display sharp and real images with vivid colors from any angle. 3. The the definition of the 5inch HD IPS screen is up to 1080*720, clearer than other 854*480 screen. 4. Adopt durable industrial screen and rugged design, which can withstand accidentally drop..
【 Wide Field of View & 2 View Modes 】--- There are 2 cameras built into the end of the endoscope cable. With the dual-lens endoscope you can inspect the range of 70° in front and its side, total 140° field of view, get wider field of view than single lens endoscope. The endoscope camera provide 2 display modes, one is front image, one is side image. One key switch between the front-view camera and the side-view camera..
【 Advanced Dual Camera & Practical 】--- The 5.0mm borescope camera is the smallest dual-lens borescope on the market. The scope camera is equipped with a 1080P front camera and a 1080P side view camera, both the front camera and the side camera can capture image up to 1920*1080. The small and HD industrial borescope can be widely used for inspection of....

Operating System - Microsoft Windows Mobile 6 ( Pocket PC ).
Display - 3.5" Brilliant TFT LCD 65k full-colors, 16-bit display QVGA, 240x320 resolution with touch screen (anti-glare).
Memory - 256MB Flash ROM and 64 MBBluetooth v2.0(EDR) / SIR 115.2kbps (max) / USB 1.1/ WiFi 802.11b+g.
Expansion Slot - 1 x SD slot (SDIO/SD/MMC ) up to 4GBIntegrated microphone and speakerFull duplex record and playback1 x 3.5mm earphone jack and MP3 stereo.

Android Operating System, Bluetooth 3.0 with A2DP for stereo headsets.
16GB internal memory, with expansion possible through a microSD slot.
7-inch 1024x600 TFT capacitive touch screen, Rear (5MP) and Front (1.3MP) cameras.
Wi-Fi 802.11 b/g/n 2.4GHz, G-sensor, GPS/aGPS, digital compass, ambient light sensor.

800x480 hardware resolution 7inch Touch Screen TFT Display for Raspberry Pi.
Capacitive touch panel, support 5-point touch.
Supports Pi 4B/3B+/3A+/3B/2B/B+/A+. Another adapter board is required for CM3/3+.
Supports Raspbian/Ubuntu/Kali and WIN 10 IoT, driver-free.Support backlight adjusts by software..

For the document and download information, refer to Geekworm WiKi search (3.5_LCD_B)..
Note: 1. The Raspberry Pi 4B mother board and cooling fan is not included in all the packing list. 2. The black ABS case only suitable for this 3.5 inch screen with Raspberry Pi 4 Model B, do not support other Raspberry Pi versions. Not support install cooling fan..
Physical resolution 320 x 480, with resistive touch control.
it supports up to 125MHz SPI signal input, showing stable and no flicker.
Support Raspbian/Ubuntu/Kali/Retropie system, provide driver and image, please refer to WiKi(user manual)..
LCD Interface: SPI (up to 125MHz SPI input, Max FPS: 50Mhz).

Plug and play with user friendly screen: complete the assembling with 8 screws, then start to play through a 3.5-Inch tft touch screen.
Anycubic ultra base: Anycubic patented heat bed, super adhesion, smoothly lattice bottom surface. Easier to take off 3D-171 by hands, so you won't need masking tape and glue stickers any more.
Filament detection: automatic printing pause when filament runs out, resume after filament re-load with just one click.
Anycubic Advantage: We take care of all parts of unartificial quality-related issues with a replacement for 3 months after the purchase date, and provide lifetime technical support.