Reviews3 6v Li socl2 Er10280

DiamondHobby 60A Brushed ESC Vehicle Waterproof Speed Controller Instantaneous Current 360A with BEC 3A/6V for 1:10/12/16 RC Car,Boat

  • Build in Capacitor, Water proof, Dust proof to adapt all weather.
  • 3 mode : Boat, Forward/Reverse, Crawler, suitable for all types of car.
  • High quality with special circuitry to accept surge current.
  • 3A/6V BEC output for high torque servo,Auto throttle calibration, easy for newbie.
  • Use Jumper pin setting to select mode and functions,Low voltage cut off for Li-Po battery, high temperature protection.
Check Stock

Aiobuvr Replacement Battery 300-10186 for ADT Command Smart Security Panel, 3.7V 7800mAh

  • ADT Battery Replacement for ADT Command Smart Security Panel 300-10186 (3.6v / 3.7v / 4.2v).
  • 【Compatible models】: High Capacity replacement battery for ADT Command Smart Home Touchscreen Security Panel ADT5AIO-1, ADT5AIO-2, ADT5AIO-3, ADT7AIO-1, ADT2X16AIO-1, ADT2X16AIO-2..
  • 【Battery Parameters】: Volts: 3.7V, Capacity: 7800mAh/28.86Wh, Type:Li-ion, Net Weight: 137g / 4.83oz, Size: 68.80 x 55.40 x 18.80mm..
  • 【Safety protection】: ADT command panel battery replacement has safety protection function,er-charge, over-discharge, over-heat, over-current & short-circuit protection..
  • 【Battery High Quality】: The ADT panel replacement batteries are made to the exact specifications as same as the original battery. Every battery is with strict spec detection and use testing, absolutely ensure the safe and durable use of the battery.
Check Stock

Tenergy TB6-B Balance Charger and 5-in-1 Battery Meter for 1S-6S Digital Battery Packs, Charger for NiMH/NiCD/Li-PO/Li-Fe Packs

  • Multiple connector harness - Tenergy's AC balance charger can recharge battery packs with tamiya, mini tamiya, JST, HiTec, EC3, Deans, XT60, and bare leads connectors so that additional connectors can be added..
  • Wide voltage compatibility - The smart charger is compatible with NiMH/NiCd 1.2V-18V (1S-15S), 6V, 7.2V, 9.6V, 12V. LiPO/Li-ion 3.7V-22.2V (1S-6S), 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), and 9.6V, 12.8V, 16V. SLA 2V-20V..
  • Multi-purpose battery meter - Tenergy's 5-in-1 cell meter is a great addition to any habby charging arsenal, the meter estimates voltages for LiPo/LiFePO4/Li-ion (2-7 cells) packs and NiCd / NiMH batteries for TX and RX (4-7 cells). The battery capacity checker requires no additional accessories and is powered by the testing battery pack to quickly evaluate the pack's capacity.
  • use the battery checker to evaluate the health of your battery pack and decide when to discard or replace old packs..
  • Purchase confidently - Both the Tb6-b balance charger discharger and 5-in-1 battery meter includes Tenergy 12 months warranty, and life time support from our local team located in California..
Check Stock

Tenergy TB6AC+80W Balance Charger Discharger, 1S-6S Intelligent Digital Battery Pack Charger for NiMH/NiCd/Li-Po/Li-Fe Packs, LCD RC Battery Charger w/ Tamiya/JST/EC3/HiTec/Deans Connectors

  • Wide battery chemistry compatibility - Have the Tenergy TB6AC+80W RC hobbies balance charger/discharger and power supply for all of your battery pack types. Use with NiMH, NiCd, LiPo, Li-ion, LiFePO4, and SLA battery packs..
  • Bonus accessories - This LiPo battery charger comes with octopus multi-charging harness with Tamiya, mini Tamiya, JST, HiTec, EC3, Deans connectors to be compatible with many charging connectors. The package also comes with a power supply..
  • Wide voltage compatibility - Use the digital balance charger on NiMH/NiCd 1.2V-18V (1S-15S), with popular options of 6V, 7.2V, 9.6V, 12V. LiPo/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. SLA 2V-20V..
  • Multiple functions - More than a regular electronic balance charger, Tenergy TB6AC+80W comes with features like Li-ion and LiPo balancing, fast charging, data storage, cyclic charging and discharging and much more for all of your battery packs..
  • Easy to read - View all charging statuses and settings on this intelligent balance charger LCD screen as you navigate the modes and selections. Charger includes a 12-month warranty..
Check Stock

Tenergy LiPO Bag for Charging and Storage and 1S-6S Digital Battery Pack Charger for Li-Fe/Li-PO/NiCd/NiMH Packs Balance Charger Discharger w/Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply

  • Bundle which includes Tenergy's TB6 balance charger with a large lipo bag and small lipo bag..
  • Tenergy balance charger/discharger recharges power for all of multiple battery pack types. Use with NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs..
  • TB6 digital battery pack charger is compatible with NiMH/NiCd 1.2V-18V (1S-15S), with popular options of 6V, 7.2V, 9.6V, 12V. LiPO/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. SLA 2V-20V..
  • The included Tenergy fire resistance lipo battery bag is made with triple-layered flame retardant protection material capable of withstanding up to 2000°F and meets the rigorous international standards for flammability set by UL 94.
  • Tenergy TB6 balance charger discharger includes 12-month warranty..
Check Stock

SPS Brand 6V 4.5Ah Replacement Battery for cp0660 gp64.5 lcr6v4p hk-3fm4.5 (12 Pack)

  • Shipment contains TWELVE of SPS Brand 6V 4.5Ah SLA Replacement Batteries for cp0660 gp64.5 lcr6v4p hk-3fm4.5.
  • Shipment contains only batteries, please reuse your cables and connectors. Please refer the operations manual for installation instructions for SPS Brand 6V 4.5Ah SLA Replacement Batteries for cp0660 gp64.5 lcr6v4p hk-3fm4.5.
  • Spec: 6V 4.5Ah, LXWXH = 2.76 X 1.85 X 3.98 Inches, Weight = 3 LBS per unit..
  • SPS Brand 6V 4.5Ah SLA Replacement Batteries for cp0660 gp64.5 lcr6v4p hk-3fm4.5 has one year warranty when used under normal conditions..
  • Replacement batteries are Rechargeable. Absorbent Glass Mat (AGM) technology creates superior performance. Charge voltages are marked on the battery for cyclic and float applications for your convenience..
Check Stock

ML1.3-6 - 6 Volt 1.3 AH, F1 Terminal, Rechargeable SLA AGM Battery

  • ML1.3-6 SLA is a 6V 1.3AH Sealed Lead Acid (SLA) rechargeable maintenance free battery - UL Certified.
  • Dimensions: 3.82 inches x 0.98 inches x 2.24 inches. Terminal: F1. Listing is for the Battery only. No wire harness or mounting accessories included..
  • SLA / AGM spill proof battery has a characteristic of high discharge rate, wide operating temperatures, long service life and deep discharge recover..
  • Compatibility: GE 600-1054-95R Simon XT Replacement Battery, GE Simon XT Panel, GE Simon XT ALARM, Power Patrol SLA0865, GE Interlogix 60-914 Back-Up Battery for GE Simon 3, WKA6-1.3F Battery, GE Simon XT Panel Security, Portalac GS PE6V1.2 Emergency Light, Network Security Systems IPSAI600 Alarm, Consent GS6V1.3AH, Sensaphone Professional 1400, GE Simon III Alarm, Casil CA613, Panasonic LC-R061R3P, Toyo 3FM1.3, Power-Sonic PS-612, GE Simon 60-875, LEOCH 6V1.3AH 6V1.4AH 6V1.2AH LP6-1.0 and more.
  • Rechargeable battery that can be mounted in any position, resists shocks and vibration. Long lasting high performance in high and low temperatures..
Check Stock

Tenergy LiPO Bag for Charging and Storage and 1S-6S Digital Battery Pack Charger for Li-Fe/Li-PO/NiCd/NiMH Packs Balance Charger Discharger w/Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply

  • Bundle which includes Tenergy's TB6 balance charger with liPO bag. Spend more time enjoying your hobbies with a safer charging and storage bag..
  • Tenergy balance charger/discharger recharges power for all of multiple battery pack types. Use with NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs..
  • TB6 digital battery pack charger is compatible with NiMH/NiCd 1.2V-18V (1S-15S), with popular options of 6V, 7.2V, 9.6V, 12V. LiPO/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. SLA 2V-20V..
  • The included Tenergy fire resistance lipo battery bag is made with triple-layered flame retardant protection material capable of withstanding up to 2000°F and meets the rigorous international safety standards for flammability set by UL 94.
  • Tenergy TB6 balance charger discharger includes Tenergy's 12-month warranty..
Check Stock

3.6V C Size ER 26500 9000mAh Lithium Thionyl Chloride Battery with Button Top (4pc)

  • Model:ER26500 C Size Unrechargeable Li-SOCl2 Batteries.
  • Wide operating temperature range(-55 to +85 degree ).
  • Applications:Memory back-up,Real-time clocks,Utility metering,Automated meter reading,Wireless alarms and Security devices..
Check Stock

ER 26500 9000mAh 3.6V C Size Lithium Thionyl Chloride Battery with Button Top (24pc)

  • Model:ER26500 C Size Unrechargeable Li-SOCl2 Batteries.
  • Wide operating temperature range(-55 to +85 degree ).
  • Applications:Memory back-up,Real-time clocks,Utility metering,Automated meter reading,Wireless alarms and Security devices..
Check Stock

LiPo Charger Balance Fast Charger Discharger B6V2 Digital Battery Pack Charger for 1S-6S LiPo LiHV Life Li-ion NiCD NiMH PB Smart Battery RC Car

  • ✌{VARIETY BATTERY CHARGING} Our B6V2 RC BATTERY CHARGER is upgrade version of B6 charger, it can support a variety of battery types: LiPo, LiFe,....
  • ✌{MULTI-MODES} The 80W 6A DC11V-18V battery charger has charge mode, discharge mode and balance mode, with the charge mode and discharge mode, you....
  • ✌{MULTI-FUNCTIONS} Except charge mode, balance mode, and discharge mode, this rc charger also has other functions: terminal voltage control.
  • ✌{WIDE VOLTAGE COMPATIBILITY} The rc battery charger can charge LiPo: 1-6 cells, LiFe: 1-6 cells, Li-ion: 1-6 cells, LiHV: 1-6 cells, NiMH:....
  • ✌{PACKAGE CONTENT} 1*B6V2 RC Battery Charger.
Check Stock