Reviews3 Inch Exhaust

Upower 2 inch Inlet Exhaust Tip Burnt Muffler 3 inch Outlet, 2' to 3' 14.6' Length Exhaust Tip Universal For Car Truck

Dimension: 2 inch inlet, 3 inch outlet, Overall Length: 14.6 inch, Exhaust Muffler body width 4 inch.
2 in 1 Design: This is a 2 inch muffler resonator with blue burnt exhaust tip, design with thick wall straight cut and can be easily weld on the exhaust tip pipe..
High Quality Material: Upower exhaust tip built with mirror polished stainless steel & blue plating. Muffler is made by premium cotton helps absorbing sound and producing a low, deep tone, durable and Anti-corrosive, never Rusty.
Wide Application: Universal fits any 2.0" Outlet or 2.1" Inlet trucks car exhaust tail pipe..
Note: 1 Year Warranty, No instruction is included. Professional installation is highly recommended..

Check Stock

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....

Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Check Stock

Dynabrade 52420 3-Inch 7-Degree Offset Cut-Off Wheel Tool

Cut-Off Wheel Tool, for efficient cutting of sheet metal, frame rails, clamps, bolts, etc.
3-Inch Diameter, 7 Degrees Offset, 5 hp, 20,000 RPM, Front Exhaust.
Accepts optional 3-Inch diameter Type 1 Cut-Off Wheels.
Cut-off Wheel Tool, For Efficient Cutting Of Sheet Metal.
3-inch Diameter, 7 Degrees Offset, 5 Hip.
Accepts Optional 3-inch Diameter Type 1 Cut-off Wheels.

Check Stock

4 Pcs Exhaust Hanger Mount Rubber Bushing Insulator Grommet Hanger Bushing Support For Tail Pipe Exhaust System Shock Absorbent Support Bracket Donut

Installation steps: 1 Cutting off the rubber from the exhaust Insulator. 2 Use a wire brush to remove dirt & remnant rubber from the hangers. 3 Apply silicone Lube to the retaining ends of the exhaust hangers. 4 Install the new rubber mount.
Position: Between the exhaust pipe bracket, muffler, and the chassis hanger. Installed in the hanging exhausts back boxes and exhaust mount.
Constructed from durable and robust EPDM rubber material for long life.
Package Including 4 pieces rubber exhaust hangers.

Check Stock

ABN Exhaust Pipe Expander Tool - Tail Pipe Expander Exhaust Expander, Exhaust Pipe Stretcher Kit 1-5/18 to 4-1/4 Inch

[Increase Engine RPM]: Expanding your tailpipe with the ABN Exhaust Tube Expander Tailpipe Expander Kit to increase exhaust volume and to give you more power for your engine.
[Easy to Use]: Lubricate all parts of the exhaust pipe bender stretch tool and attach correct sleeve.
Insert pipe spread tool into pipe, connect to existing drill, and expand.
Pipe might need to be warmed during winter months to prevent damage while using exhaust flare tool.
[Expand Most Metals]: Tailpipe expander tool kit great for all types of pipes, from aluminum to stainless steel.
Exhaust pipe expanding tool can expand piping from 1-5/18 to 4-1/4 inches (3.3 to 10.8cm).
[Easy Storage]: HVAC pipe expander parts come in a plastic storage case to keep the steel and copper pipe expander kit organized.
[Contents]: Exhaust pipe expansion tool kit includes a 3/4-inch and 1/2-inch (1.9 and 1.3cm) shank collet expander chuck, 5 expander sleeves, and 2 packs of black rubber O ring replacements.

Check Stock

3 Inch 16 Feet Air Duct Flex Air Aluminum Foil Ducting Dryer Vent Hose HVAC Ventilation for Grow Tents, Dryer Rooms, Kitchen, 2 Clamps Included

3 Inch Vent Hose Size & Material: 3 inches (diameter) x 16 feet (length) when fully extended, flexible ventilation ducting made of aluminum foil and steel wire helix to preserve the shape..
Thermal Endurance: 3 inch duct hose with a good thermal insulation performance, works well with your portable ac device, Temperature endurance range from -4 ~ 176°F.(-20℃ ~ 80℃).
Easy Installation: 2 pairs of 3 inch metal clamps made from stainless steel. Flexible length for exhaust fan blower / inline fan..
Fire Proof Coating: Flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance..
Wide Applications: Air Duct is suitable for HVAC system. It will move and deliver air in Kitchens (cooking exhaust), Green Houses and Grow Rooms (Air Circulation, Intake, Exhaust and Light Fixture Cooling), Bathrooms (Smell and Moisture Exhaust), Dryer Rooms, Grow Tents and other applications etc. Thick layer Aluminum on this ducting prevents gas and light leaks..

Check Stock

Simply Ming Stovetop Oven Cookbook

REPLACe YOUR OLD RV STOVE VENT FLAP: The Dumble RV Supplies Camper Range Hood Vent Cover in White is an injection-molded styrene plastic RV vent range horizontal exterior wall vent that can be used with forced ventilation on large outlet static exhaust range hoods in your RV, camper, travel trailer, or mobile home kitchen.
PERFECT SIZE: Requires 10.3-inch x 3.5-inch (26.2x8.9 cm) opening and 1.7-inch (4.3 cm) inlet flange collar length (depth that goes through wall).
11.6-inch x 5.3-inch x 2.1-inch (29.5x13.5x5.3 cm) overall outside dimensions.
10 total screw holes - top and bottom holes 3.75 inches (9.5 cm) apart (measurement center to center).
Ensure that the overall size of the vent and its flanges are correct.
INSTALL IN MINUTES: Remove your hood (4 screws that go up through hood into cabinet underside), draw outline of this RV range hood exhaust vent insert on interior wall where hood meets wall, drill holes through wall at the corners of the outline, saw outline from interior, tuck installation into wall, saw outline from exterior, caulk/tape (not included) vent frame, press vent into opening, secure vent with the included screws, reinstall hood.
KEEP OUT THE BUGS & ELEMENTS: Features an RV hood damp....

Check Stock

3 Inlet 3 Outlet Exhaust Muffler Pair of 3 Inch Resonator Universal Stainless Steel Exhaust Muffler Resonator for Cars 12 Overall Length

Ⓞ DIMENSION - Inlet Diameter: 3 inch, Outlet Diameter: 3 inch，Overall Length: 11.5 inch, Body Shape: Round, Body Length: 8 inch, Body Diameter: 4....
Ⓞ FUNCTION - Designed to dampen exhaust noise, Facilitates undisrupted exhaust flow. The muffler that was quieter with a mild tone..
Ⓞ ENGINEERED TO LAST- Stainless steel has a protective function, corrosion resistance and heat resistance..
Ⓞ ADVANTAGE - Straight through perforated cores for the highest flow possible..
Ⓞ 100% SATISFACTION - If you are not satisfied with our Exhaust Muffler,please contact us,we will try our best to solve your problem..

Check Stock

Carbon Fiber Exhaust Tip 3 Inlet 4 Outlet Red Exhaust Tip 3 inch Car Tailpipe Muffler Tip for 3in Exhaust Pipe

【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3 inch.
【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid....
【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high....
【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
【Warranty】 Tempsnow provide 30-Days warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're....

Check Stock

Upower Dual Exhaust Tips 2.25 inch inlet 3 inch outlet 9.2" Long Vacuum Plating Blue 304 Polished Stainless Steel Weld on Staggered Exhaust Tailpipe Tips 2.25" to 3"(Pack of 2)

【Design】2.25 ID Weld On - Double Wall Angled Cut - Rolled Edge-Staggered-Offset Exhaust tips.
【Material】Mirror Polished T304 Stainless Steel Exhaust Tip.High Quality Vacuum Plating Blue.Durable and Anti-corrosive,never Rusty..
【Wide Application】Universal fits trucks pickup car with 2.25" INLET Exhaust Tailpipe Tips system. NOTICE: Before purchasing, Pls kindly check the size of your factory exhaust tip..
【1 Year Warranty】Pack of 2 dual exhaust tips.
No instruction is included. Professional installation is highly recommended..

Check Stock