Reviews3 Phase Asynchronous Motor

MYSWEETY 29 Inch Colorful Hair Mannequin Head Hairdressing Practice Training Doll Heads Cosmetology Hair Styling Mannequins Heads with Clamp + Practice Tools PINK

  • ✔️Package include: ①1 x 2.2KW 220V Spindle Motor ②1 x 2.2KW 220V VFD ③1 x 75W 220V Water Pump ④1 x 196 in Water Pipes ⑤1x40 in Electric....
  • ✔️2KW Spindle Motor：Technical Parameters:φ3 x 13 in (Diameter: 7.5 cm x Length: 33.6 cm).
  • ✔️Water Pump：This is a high-performance, energy-efficient pump and is well-designed for use in spindle, suitable for 0.8KW, 1.5KW, 2.2KW, 3KW....
  • ✔️1 Year Warranty：We offer 1 year warranty, if you have any questions, please contact us, our customer service team are waiting for helping you....
Check Stock

Hoverboard Morning

  • Motor Speed Controller Brushless Controller with Hall-less.Full SMD process,stable performance,humanized design, interface all adopts terminal blocks..
  • "Voltage 5-50V high power 380W DC three-phase high-speed brushless sensorless controller. ".
  • Standard heat sink,onboard speed regulating potentiometer，you can use it when you have power on..
  • DC three-phase high-speed brushless sensorless controller recognizes PWM signal input, amplitude 3-5V supports PLC0-5V analog quantity, input control.
  • "Size-Length 63MM * width 45MM * height 31MM,Over-temperature protection:yes (half the over-temperature power) Maximum speed:224000 RPM (2 pole motor),74000 RPM (6 pole motor),40000 RPM (12 pole motor), 35000 RPM (14 pole motor).".
Check Stock

Grizzly G9933 Three Spindle Shaper

  • Motor size: 3 H.P. TEFC Single Phase 220V.
  • Working size of table: 15-Inch x 32-Inch.
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock

Grizzly Industrial G0449-37\ 10 HP Drum Sander

  • Sanding drum motor: 10 HP, 240V, single-phase, TEFC, 1725 RPM.
Check Stock

Fostex USA Fostex Desktop Headphone Amplifier with DAC Balanced Output HP-A4BL

  • highly precise crystal with low phase noise.
  • Playback 24bit/192kHz PCM and 11.2MHz DSD audio.
  • high performance DAC (Barrbrown PCM1792A).
  • Asynchronous transfer up to 192kHz/24bit compatible with USB Audio 2.0.
  • HI/LO gain selection (10dB) for wider selection of headphones.
  • digital filter selecting roll-off characteristics and cut-off frequencies.
Check Stock

MYSWEETY CNC Spindle Motor Kits 2.2KW Water Cooled Spindle Motor 2.2KW Inverter + 80MM Clamp Mount +13PCS ER20 Collet + 5M Water Pipe + Water Pump for CNC Router

  • ✔️Package include: ①1 x 2.2KW 220V Spindle Motor ②1 x 2.2KW 220V VFD ③1 x 75W 220V Water Pump ④1 x 196 in Water Pipes ⑤1x40 in Electric....
  • ✔️2KW Spindle Motor：Technical Parameters:φ3 x 13 in (Diameter: 7.5 cm x Length: 33.6 cm).
  • ✔️Water Pump：This is a high-performance, energy-efficient pump and is well-designed for use in spindle, suitable for 0.8KW, 1.5KW, 2.2KW, 3KW....
  • ✔️1 Year Warranty：We offer 1 year warranty, if you have any questions, please contact us, our customer service team are waiting for helping you....
Check Stock

110V 60W Ac Gear Motor Electric Single-Phase Motor Gear Motor 0-135RPM Variable Speed Adjustable Controller Governor Geared Motor and Adjustable Speed Controller Combo (Reduction Ratio 1:10, 60W)

  • ...AL] The 60W deceleration motor can achieve super fast speed of 1350 RPM, thus ensuring high efficiency.And the motor has the characteristics of heat resistance, low noise, high quality and long service life.The motor has a compact body, lightweight structure, easy to carry and operate..
  • [ADJUSTABLE SPEED] The single-phase motor also has a reduction gear box and a governor, the speed regulator has a large torque, with a variety of optional speeds.Therefore, it is more convenient to use. You can adjust different speed according to different products to achieve the desired effect. It is very convenient and fast to use..
  • [SPECIFICATIONS] Name: AC gear motor. Rated voltage: 110V. Rated speed: 0-135 RPM. Reduction ratio: 1:10(10K). Torque: 3.8nm. Power Phase: single-phase. Shaft diameter：0.5inch. Geared motor size：5.5inch * 3.5inch *3inch. Reducer size: 1.6*3.5*3inch. Packing list:1 x motor, 1 x reducer, 1 x speed controller..
  • [QUALITY ASSURANCE] Our products are shipped directly from the US warehouse. We have strict quality control system, our products are put into the market after rigorous testing. We provide friendly customer services forever. If you have any questions or quality issue,please feel free to contact us..
Check Stock

RioRand 400W 6-60V PWM DC Brushless Electric Motor Speed Controller with Hall

  • 1.Humanized design,the interface adopts binding posts,standard heat sink,integrated speed regulating potentiometer on the board,it can be used when the power is on,save time and effort..
  • 2.Full patch technology,stable performance,with forward and reverse, brake function.Electric Motor Speed Controller Brushless Controller with Hall..
  • 3.Wide voltage 6-60V high power 400W DC three-phase brushless with Hall controller..
  • 4.High-power 400W DC three-phase brushless with Hall controller, support PLC 0-5V analog control, support PWM control, amplitude 2.5-5V.
  • 5.There are three relatively thick phase wires on the motor, and there are also three phase wire interfaces on the driver board. They are marked with the characters of MA, MB, MC and other similar characters, and they are also connected respectively..
Check Stock

SZCY LLC AC 220V/2.2KW Variable Frequency Drive, 12A VFD Inverter Frequency Converter for Spindle Motor Speed Control (Single-Phase Input, 3 Phase Output)

  • Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other machines!.
  • Spacing 2.54mm bar connector, 5-pin plug. DC cooling fan low noise, large air volume..
  • The machine is screwed to ensure the safety and reliability of the use. Three anti-paint protection lines, improve and extend the life of the fuselage..
  • The operator panel can be moved out and extended by 2M, 1.5M, 1M, 30CM. 1 Year replace or refund!!!.
Check Stock

Fabio Leornardi Mr0 1/2 Hp Tomato Milling Machine #5 Tomato Press And Strainer

  • 1/2 Horse Power - 380 Watts made in Italy SP5 - 3" Diameter Neck Tomato Milling Attachment.
  • 18/10 Stainless Steel Screen Double Threaded Screw Feeder.
  • Heavy Cast Iron Neck Treated with Special Resins - your choice on diameter.
  • Extra Large Stainless Feed Bowl Output Revolutions: 120 per minute.
  • Permanently Lubricated Spheroidal Cast Iron Main Gear Motor: Asynchronous with Condenser.
Check Stock