Reviews3 Phase Relay

TG30S Mini AC 220-440V Voltage Monitoring Relay Phase Sequence Protection Protection 3-Phase Phase Sequence Relay for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Mini AC 220-440V TG30S Phase Sequence Protection Voltage Monitoring Relay Voltage Phase Protective Relay Building Electronics Projects for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Siemens 3UG4512-1BR20 Monitoring Relay, Three Phase Voltage, Insulation Monitoring, 22.5mm Width, Screw Terminal, 2 CO Contacts, Delay Time, 160-690 Line Supply Voltage

  • Convenient Monitoring: The voltage relay can monitor its own operating voltage (true rms measurement)..
  • High Accuracy: The voltage relay has 8 adjustable rated voltages, and the voltage measurement accuracy is less than 1%..
  • Application: Equipment protection and control (tower cranes, elevators, agricultural equipment, refrigerated trucks).
  • LED Indicator: The working status of the voltage control relay is indicated by the LED indicator..
  • Small Size and Easy to Install: The voltage protection relay is ultra-small and can be mounted on a 35mm DIN rail..
Check Stock

SSR-100DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 100A

  • Model: SSR-100DD, single phase Solid State Relay 100A DC to DC control, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 100 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

SSR-25DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 25A

  • Model: SSR-25DD, single phase Solid State Relay 25A DC to DC control, UL Approved, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 25 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

NR2-93 Thermal Overload Relay Thermal Protector 50-60hz Overload Protection(37-50A)

  • Suitable for using in power system with rated isolation voltage up to 690V, circuit of 50-60hz.
  • Can be used as overload protection of your long term or indirect long term service motor.
  • Used for protecting the phase break when the electric motor is overload.
  • The relay has different mechanism and temperature compensation.
  • With phase break protection, manual and automatic reset, temperature compensation, trip indication, test button and stop button.
Check Stock

CR Magnetics CR2550-A Low Cost Remote Current Indicator with Amber LED, 1.5 AAC Turn-On Point

  • Low cost for high volume OEM installations.
  • Electrical isolation between circuits, output relay rated up to 20 Amps.
  • LED trip status indicator, dead band prevents relay chatter.
  • Calibrated dial option available, external current transformers available.
  • Applications: monitor electrical heater elements, sense motor over/under loads, detect lamp burn-out, indicate phase loss.
  • Variable trip point and time delay, monitors currents from 10 mA to 60 AC amps.
Check Stock

NEW TeSys LRD thermal overload relays LR-D32 LRD32 23-32A Class 10A

  • Working Range: Suitable for using in power system with rated isolation voltage up to 690V, circuit of 50-60hz.
  • Longer Service: Can be used as overload protection of your long term or indirect long term service motor.
  • Protection Function: Used for protecting the phase break when the electric motor is overload.
  • Temperature Compension: The relay has different mechanism and temperature compensation.
  • Multifunctions: With phase break protection, manual and automatic reset, temperature compensation, trip indication, test button and stop button.
Check Stock

Phase Monitoring Relays JVR800-2 Under Over Voltage Protector, Three-Phase Voltage Monitoring Sequence Protection Relay with

  • This monitoring relay can monitor own working voltage..
  • 8 kinds of rated voltages are adjustable, can apply to voltages in all regions of the world.
  • The working status of the relay is indicated by the LED indicator.
  • Ultra-small size and it is easy to install..
  • It is applied to mobile device connection control, causing accidents in equipment protection against reverse operation, normal/emergency power switch, preventing phase failure of power load..
Check Stock

GRV8-02 Single Phase Monitor Relay, Keenso Adjustable Voltage Monitoring Relay Over Voltage Protection AC/DC Voltage Monitoring Relay A220V/ D12V/ AD24-48V/ AD120-240V (GRV8-02/AD240V)

  • 【Effective & Accurate monitoring】-- This GRV8-02 Single Phase Monitor Relay mainly used to monitor the working voltage(true RMS measurement). 100% High accuracy, voltage measurement accuracy is ≤ 1%..
  • 【Built-in LED Display】-- With built-in LED indicator, you can easily get the working status of the relay is indicated, very simple and convenient to use. The operating mode can be selected via the rotary knob..
  • 【Super Function】-- Apply to over voltage protection for electrical equipment or compressors, emergency/backup power switching control. 100% safe and practical AC/DC Monitor Relay..
  • 【Compact & Practical】-- GRV8-02 Monitoring Relay in professional design, compact size, only 18mm width, 35mm rail mounting. Portable and practical for you to operate!.
  • 【Keenso Service】-- 100% test before shipping, fast money refund & perfect customer service! If You Have Any Questions, Just Connect Us By QA & E-Mail.
Check Stock

Three Phase Voltage Monitoring Relay, Three Phase Voltage Small Monitoring Relay Phase Sequence Relay for Mobile Device Connection Control for Mobile Device(M265)

  • This monitoring relay can monitor own working voltage..
  • 8 kinds of rated voltages are adjustable, can apply to voltages in all regions of the world.
  • The working status of the relay is indicated by the LED indicator.
  • Ultra-small size and it is easy to install..
  • It is applied to mobile device connection control, causing accidents in equipment protection against reverse operation, normal/emergency power switch, preventing phase failure of power load..
Check Stock