Reviews3 Ton Daytona Floor Jack

GRADE Universal Floor Jack Rubber Pad Jack Pad Adapter Pinch Weld Side Frame Rail Protector Puck/Pad (1 Pack)

  • High Quality Floor Jack Pad:Made of heavy duty construction rubber material,MAXIMUM Load Bearing: 3 Ton.
  • Nice design Rubber Jack Pad:There is a slotted crossline on the top of the jack pads, which can align with the side clip weld and protect the side, so as to prevent the frame longitudinal beam from bending when lifting the vehicle with the jack.
  • Standard size:Universal Floor Jack Rubber Pad for most vehicles.please verify dimensions and ensure fitment to your vehicle.
  • Warm Tips: Because of floor jack rubber pad is newly factory production and heavy duty rubber material, so this jack rubber pad will has a little bit rubber smell, please put it in the ventilation room for some while! Please do not mind it.
  • 100 percent exchange or money refund- we are very sure that you will like our floor jack pad. Just contact us if not satisfied, we will be happy to help you and 100 percent replacement or full refund.
Check Stock

E-HEELP Electric Car Jack 3 Ton 12V Scissor Car Jack Electric with Impact Wrench Electric Car Jack Kit for Car SUV Sedan Tire Changing

  • ...ng Electric Impact Wrench] The portable impact wrench installed with a powerful motor and precisely-designed speed control system, makes it possible to screw/unscrew in a very short time. Compare to traditional manual wrench, it improve the efficient by 95% more. If you are a person who are not used to use ordinary floor jack and have never changed a flat tire before, you would be amazed of how easy and quick this thing works..
  • [Necessity in Your Car Trunk] The Velcro outside the box prevents it from sliding in the car trunk. This electric car jack kit contains two detachable bar heads, applied to more vehicles in the market. The two-way power supply: battery clip with 12V DC power socket(more stable, recommend)or cigar lighter. Equipped with 3 spare fuses, no need to worry about the emergency out of an emergency..
  • [To Secure Not Only Your Car, But you] Scissor car jack 3 ton will automatically stop lifting after reaching the height limit. After rounds of upgrading and broadening the base of the scissor jack, it can prevent itself from falling suddenly. The built-in circuit breaker in the jack protects your vehicle from overload. Worry about roadside emergency? No n....
Check Stock

2 Ton Floor Jack Rubber pad Universal Floor Jack Puck Pads Floor Jack pad Adapter Pinch Weld Side Frame Rail ​Protector Puck for Floor Jack Stand

  • Floor Jack Rubber pad is Universal Floor Jack pad,Load Bearing: 2 Ton..
  • Floor Jack Rubber pad Fits most Jacks & vehicles,please verify dimensions Meet the conditions of use of your vehicle..
  • Floor Jack Rubber pad Design principle：.
  • 1. Use the rubber Jack pad as a buffer to avoid damage caused by direct contact between the jack and the chassis..
  • 2. The rubber Jack pad has a buffer function, the weight of the car and the gravity generated by the jack can be transferred to the rubber Jack pad, which will not cause damage to the vehicle chassis, and can protect the chassis from wear..
  • 3.Made from high quality rubber and slash cross slotted design which will provide more cushion crush resistance & non-slip..
  • Note: Since the rubber pad of the jack is made of rubber, there will be a slight smell of glue, please place it for ventilation before use..
Check Stock

Pro-LifT Hydraulic 1.5 Ton Trolley Jack Car Lift with Blow Molded Storage Case - 3000 LBS Capacity Orange

  • Pro-Lift PL2930 Floor Jack is a 1.5 Ton car jack with welded Steel frame construction for strength and duability. It gives you the ability to lift from 5-5/16 inches to 11-3/4 inches..
  • Hydraulic trolley jack is constructed with the heavy duty steel. It features the front wheels with the rear casters for the maneuverability. The large swivel saddle provides you with the easy jack positioning and user safety.
  • This 3000 Lbs trolley jack features an overload valve bypass system to prevent jack damage and user injury, and features the compact lightweight design with the carrier handle to easily transport from one location another..
  • In additional, this 3000 Lbs car jack is packed in a blow mold storage case, which gives you the ability to easy store in your garage or trunk when not in use..
  • This 1.5 Ton car jack is ideal for auto repair services in your home garage and on the road. In addition, it is covered with 1-Year warranty from the date of the purchase..
Check Stock

Pro-LifT G-4630JSCB 3 Ton Heavy Duty Floor Jack/Jack Stands and Creeper Combo - Great for Service Garage Home Uses - Black

  • Pro Lift G-4630JSCB Mechanics Set features 3 Garage Essentials in one convenient package. It comes with 3 Ton Garage Jack, 3 Ton Jack Stand, and 300 lbs detachable Creeper..
  • The Garage Jack with the the 3 Ton Capacity features the steel frame construction for the added strength and durability. With the 3″ roller casters, they ensure the portability and stability..
  • The Garage Jack is designed to lift, but not support one end of a vehilce. It must be used in conjunction with the pair of 3 Ton jack stands provided..
  • The jack stands has the 3 Ton capacity. Install the ratchet bar into the frame. The ratchet portion of bar must be aligned with the ratchet pawl..
  • The creeper has the 40″ in length with the capacity of 300 lbs. With 6 casters, it provides users with the easy maneuverability..
Check Stock

American Lifting AL2300 Floor Jack 3 Ton - Professional Heavy Duty Hydraulic Car Truck SUV Service Jack Red

  • AL2300 is American Lifting 3 Ton heavy duty car floor jack that built with the strength and duability. It is assembled in the USA with USA and global....
  • Heavy gauge contruction, cast iron lift arm and the flanged side plates add the strength and rigidity. The large swivel saddle with the diameter of....
  • AL2300 service jack features in-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear. And, its....
  • Patented built-in by-pass device protects hydraulic system from over pumping damage. It also features the metered release system and U-Joint release....
  • This 3 Ton jack is ideal for auto repair services in the shop and garage. In addition, it is covered with 2-Year from the date of the purchase..
Check Stock

Jack Reacher

  • Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) capacity.
  • Constructed of durable, high-strength steel.
  • Equipped with a single piston quick lift pump, allowing you to easily raise the jack to the desired height.
  • Lifting range from 3-7/10" to 18-7/100" allows you can gain easy access under low-profile vehicles.
  • Foam bumper on the handle helps protect your vehicle from damage.
Check Stock

American Lifting AL2301 Floor Jack 3 Ton - Professional Heavy Duty Hydraulic Rapid Lift Floor Jack for Service Car Truck SUV Red

  • AL2301 is American Liftinng 3 Ton heavy duty car floor jack that built with the strength and duability. It gives you the ability to lift from 5 inches to 22-7/8 inches. With Feature of Rapid Lift, it provides fast, no load lifts to the jacking point in approximately 1/4" to 3/4" increments..
  • Heavy gauge contruction, cast iron lift arm and the flanged side plates add the strength and rigidity. The large swivel saddle with the diameter of 6-3/4 inches to provide you with the easy jack positioning and user safety.
  • AL2301 Garage jack features in-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear. And, its sealed hydraulic pump adds the additional durability..
  • Patented built-in by-pass device protects hydraulic system from over pumping damage. It also features the metered release system and U-Joint release mechanism to allow for precise load control..
  • This 3 Ton heavy duty service jack is ideal for auto repair services in the shop and garage. In addition, it is covered with 1-Year warranty from the date of the purchase..
Check Stock

OTC HDJ5 5 Ton Service Jack with Locking Handle and 6-3/8" to 22" Lifting Range

  • OTC's HDJ5 5-Ton Service Jack is an extremely safe and durable long chassis 5-ton floor jack that is the ideal size for lifting step vans, bucket trucks and smaller work vehicles.
  • Rugged, welded hydraulic pump and cylinder construction with rust resistant chrome plated ram.
  • built-in safety overload prevents using the jack beyond its rated capacity.
  • Handle lock and release controls are located on top of the 43 inch spring-loaded handle - handle can be locked into any position from vertical to horizontal.
  • Specifications: 6 to 22 inch lift range, 47 inch reach, 5-1/8 inch diameter, round saddle, 7.9 inch frame height, 43 inch, 3-position handle with lock and release controls, 4.4 inch fixed front (2), 2.8 inch mid-body swivel (2) casters.
  • Cycle tested design for a long life of professional duty and meets all 5 ASME PASE-2019 safety standards for service jacks.
Check Stock

ABN 3-in-1 Electric 3-Ton Car Hydraulic Floor Jack, Tire Inflator Air Pressure Gauge, Impact Wrench Automotive Service

  • STAY SAFE IN ANY ROADSIDE EMERGENCY: We all hope the day never comes, but if you get stuck with a roadside emergency, the ABN 3-in-1 Electric 3-Ton Car Hydraulic Floor Jack, Tire Inflator Air Pressure Gauge, Impact Wrench Automotive Service is a quick and easy car repair toolkit solution for all of your troubles.
  • ELECTRIC IMPACT WRENCH: Includes fuse, 2 chrome vanadium steel (CR-V) wheel nut socket adapters 17-19mm 21-23mm, and 11.5-foot (3.5m) long power cable with a 12V auto cigarette lighter adapter.
  • 12V DC with 12A maximum current, 100W rated power, 340N.M maximum torque.
  • 2-IN-1 ELECTRIC HYDRAULIC JACK/INFLATOR: Jack – Self-locking, 12V DC input, 150W rated power, 13A max current, 15A fuse, 11.5ft (3.5m) power cable, 3-Ton (2.7MT) loading weight, 6.1-17.7in (15.5mm-45mm) lifting height, 5°F to 122°F (-15°C-50°C) working temp.
  • Inflator – Needle heads, 12V cigarette lighter fuse, six-angle spanner.
  • 12V DC input, 35L/min inflating speed, 10A max current, 150 PSI (10 BAR) max pressure, 23.6in (60cm) air hose length.
Check Stock

Jack Boss Floor Jack 3 Ton Capacity Fast Lift Service Jack Steel Heavy Duty Hydraulic Car Jack

  • Specifications:Hydraulic trolley jack features a 3 ton (6,600 lbs) capacity with lifting height from 5.1" to 18.3".Floor Jack saddle Diameter: 4 inch.With quick lift function.Its the best tool for car repairing and auto emergency treatment in garage,shop.
  • Durable Steel Construtions:Heavy duty steel construction provides years of service.Equipped with rugged universal joint for precise load control.Premium stability allows the service jack to work for a long time on all kinds of roads.
  • Safety Guarantee:Car jack comes with built-in internal safety valve and vent plug ensures safe operation.Padded handle provides vehicle protection when jack is lifting.Each floor jack has been rigorously tested to ensure the safety of work.1 Year Warranty guarantee for free return.
  • Flexible Swivel Casters:Equipped with Pair 2" steel front casters and pair 2" 360-degree swivel casters (solid rubber material) for easy positioning of jack.Meets ANSI/ASME PASE safety standards..
  • Applications for Convenient Use:Widely used for car tire change.Lifting range & capacity fit for most cars, trucks, and SUVs.Please carefully check whether our products match your vehicle parameters before purchasing.
Check Stock