Reviews3 flute End Mill

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

• Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
• The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
• For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
• The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
• End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.

uxcell a11103100ux0074 5/16\ x 5/16\ Straight Shank 4 Flute Endmill Milling Cutter

• Package Content : 1 x Straight Shank End Mill.

Niagara Cutter C430R-0.375-D3-R030.0-Z4 C430R Carbide Radius End Mill TiAlN Finish 4 Flutes 3/8 Cutting Diameter 3/8 Shank Diameter 2-1/2 Overall Length 1

• Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
• Four flutes produce a better finish than fewer flutes.
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
• Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

Kodiak Cutting Tools KCT133351 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/4\ Shank, 3/4\ Length of Cut, 2-1/2\ Overall Length, 1/4\ Diameter

• Premium Sub-Micrograin Carbide End Mill Made In the USA.
• 3/4" Flute Length (Length of Cut), 30 Degree Helix.
• 2-1/2" Overall Length Center Cutting Carbide Endmill.

MH GLOBAL Corner Rounding End Mill Set Shank Milling Cutter 8 PC HSS 4 Flute 1/16-3/8''

• Wooden Box Dimension: 3-3/8 in L x 5-7/8 in W x 4 in H *Rough Estimation*.
• Corner Rounding End Mill Set Shank Milling Cutter 8 PC HSS 4 Flute 1/16-3/8''.
• Can Be Re-Sharpened Repeatedly Without Changing Form.

HHIP 3600-0056 End Mill Grinding Fixture (Angle) 5C

• Solid negative ball stops with 15 degrees spacing fast & easy set-ups..
• Can be used for grinding 2-3-4-6-8 and 12 flute end mills.
• This fixture takes 5C round collets for grinding end mill 1/16" ~ 1-1/8" .Clearance & relief angels are built into the base.
• Shell mills can easily be held with Straight Shank arbors.
• Clearance & relief angels are built into the base.

F&D Tool Company 18383-F912 Multiple Flute End Mill, Single End, Extra Long, High Speed Steel, 3/8\ Mill Diameter, 3/8\ Shank Diameter, 2.5\ Flute Length, 4.25\ Overall Length, 4 Number of Flutes

• Multiple Flute Endmill - Single End - Extra long - High Speed Steel.
• Mill Diameter: 3/8 - Shank Diameter: 3/8 - Flute Length: 2 1/2 - Overall Length: 4 1/4 - Number of Flutes: 4.
• Regularly furnished with right hand cut and right hand spiral.

5PCS 1/2' Carbide Square End Mill Bits Set, Milling Bits Cutter 1/2 Carbide End Mills for Alloy Steels/Hardened Steels, HRC 45 Deg Single End 4 Flute AlTiN Coating

• Package Included: 5pcs 1/2" carbide square end Mill.
• Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel..
• Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance..
• HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron..
• Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining..

Niagara Cutter 17016418 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

• 4 Flute design for creating finer finishes and creating a higher metal removal rate.
• General purpose end mill for working on all types of materials.
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
• Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
• Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling and slotting.

End Mill Bits 10 Pcs 1/8” Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

• [Specification]: Shank diameter 3.175mm 1/8”.
• [Single Flute End Mills]: 10 Pcs end mill bits.
• [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
• Offer a smooth cutting surface and chip clearing.
• [Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
• [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.

LittleMachineShop.com 4 Flute Ball End Mill Set, High Speed Steel, 6 Piece (2903)