Reviews3 jaw Manually Operated Chucks

13 PCS Metric M35 Cobalt Steel Twist Drill Bit Set HSS Extremely Heat Resistant with Straight Shank to Cut Through Hard Metals Like A Hot Knife Through Butter,Such as Stainless Steel,Titanium Alloy

  • ✅ Faster Cutting and Longer Life— Our Twist Drill Bit HSS are Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to 12 times when compared with an average HSS drill bit..
  • ✅ No Center Punch Is Needed—The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Twist drill bit kit Will not "walk" or "wander".
  • ✅ Extremely Heat Resistant — twist drill bits Must be used and operated at 1500 RPM or greater for maximum efficiency. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.
  • ✅ Metal Cutting — Drilling Steel, Stainless Steel, Hard Metal and Iron.Particularly successful in cutting through hard metals such as hard metal ,stainless steel and cast iron, although they can be used for softer materials, too.
  • ✅ Easy Usage And Store —The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm,13Pcs Packed in a Plastic Bag For Easy Usage And Store.
Check Stock

Prolinemax 10' Chuck + 220-480 LBS Welding Positioner Positioning Rotary Turn Table Tilt 0-135 Welder 110V

  • Horizontal Loading Capacity: 480 lbs *Without Chuck Attached*.
  • Vertical Loading Capacity: 220 lbs *Without Chuck Attached*.
  • Center Hole Diameter of The Table: 1-1/8''.
  • Unit Weight: 78 lbs (Positioner) 46 lbs (Chuck).
  • Overall Dimension: 11-3/4''L x 15''W x 22-1/4''H with Chuck Attached *estimate only*.
Check Stock

Keyless Drill Chuck Extra80-RV13, Röhm 1328310, 1/2\-20 Mount, 1/16\-1/2\ Capacity with Retaining Ring, Trough-Hole, Metal

  • Carbide Tipped Jaws for Super Strong Grip.
  • For Normal and Rotary Hammer Drills, without Spindle Stop.
  • Radial Locking for Clockwise and Counter Clockwise.
  • Replaces Milwaukee Drill Chucks 42-66-0755.
Check Stock

AUTOTOOLHOME 1/4-inch Hex Shank Keyless Drill Chuck Quick Change Adapter Power Screwdriver to Drill Converter Conversion Conversion Tool

  • Instantly convert impact driver to hold non-quick change drill & driver bits.
  • Keyless chuck finger-tightens for easy bit changes.
  • Precision three jaws,tightly well,capacity: 0.02" (0.5 mm) to 0.3" (8 mm).
  • Quick-change hex shank for instant swaps.
  • Fits all chucks, 1/4" impact drivers, & quick-change adapters.
Check Stock

Hymnorq Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron

  • ... NO CENTER PUNCH NEEDED - The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency.
  • 13PC METRIC BITS - The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm. Well organized in a plastic indexed storage case for easy transport to your worksite..
  • FOR METALWORKING - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would get a much better result with these tips. Welcome to do....
Check Stock

Machinery Repairman

  • Infinitely Variable Speeds: Power metal lathes has large center distance 350mm(13.78") and swing over bed:180mm (7.09"),spindle bore: 21mm(0.82"). ​Variable speed from 50-2500 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. Emergency stop buttom included..
  • Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp is included..
  • Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
  • Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling work....
Check Stock

TEKTON 36 Inch Ratchet Bar Clamp / 42 Inch Spreader Set 2-Piece | CLP51536

  • Includes 2-pc 36 Inch Ratchet Bar Clamp / 42 Inch Spreader.
  • Continuous, trigger-operated ratchet action applies precise and consistent pressure.
  • Press quick release button to freely slide jaw to any position.
  • Soft jaw pads grip workpiece and protect surfaces from damage.
Check Stock

GODESON Air Chuck Locking Air Chuck use for Tire Inflator Nozzles Pack of Clip-on and Twist-on Chucks Pack of 2pcs

  • 1. HEAVY DUTY BRASS CONSTRUCTION of tire chucks with lock on make the tire air chucks durable and Reliable..
  • 2. INTERCHANGEBALE AIR CHUCKS- including Clip-on chuck and Twist-on chuck(thread on) in 1 package. You just choose it for different using. Clip- on....
  • 3. SMART DESIGN with Large Bore of tire air chuck, Open flow through for heavy duty air chuck, while close flow through for clip-on chuck.
  • 4. UNIVERSAL CONNECT TYPE ,1/4-Inch Female NPT, 3/4-Inch Hex Air Chucks, Fits Standard 1/4" NPT Fittings.
  • Quick connect tire inflator chuck, Designed to use with Inflator and pressure gauge. LIFETIME 100% Satisfaction....
Check Stock

BEAMNOVA Sheet Metal Bead Roller Machine 18 inch Gear Drive Bench 6 Dies Set

  • Plate steel body and sports a full 18 inches of throat depth, making it perfect for strengthening any type of panels such as roof, deck, and hoods..
  • This bead roller is manually operated by a hand crank that drives both the bottom and top bead rolls..
  • This bench-mounted manually operated bead roller comes with the most popular sizes of forming rolls for HVAC work..
  • It comes with a rolling rack and six sets of the most common rolls required by metal forming enthusiasts.
Check Stock

KIARUO Pneumatic Rivet Gun 3/16" 5/32" 1/8" 3/32",KR-S50 with 1 Set of Extra Jaws, Air Hydraulic Riveter Tool kit for Aluminium, Steel and Stainless Steel Rivets

  • 【4 Size Capacity】The Air Rivet Gun Includes 4 Nose pieces: 3/16in, 5/32in, 1/8in, 3/32in.For use with aluminium, steel and stainless steel blind rivets..
  • 【 Three-jaws Design 】Three-Jaws bite rivet, riveted firmly,wish is more wear-resistant and durable，and extends the service life of the rivet gun，Simple jaws change design，can be changed in minutes without tools. **extra 1set jaws for free.
  • 【 Powerful Pull】This Professional Air Hydraulic Riveter generates up to 2880 lb. of pull force for quick, precise riveting.only 1-working stroke to fasten any size rivets.
  • 【Easy Operation】The light weight 2.5 lb and tuned balance make this tool easy to hold and operate.Trigger switch can easily be operated with one fingers for minimum fatigue..
  • 【 360°Rotary switch】This KR-S50 model also features an innovative left or right, On/Off swivel air fitting providing additional flexibility, conserving energy and reducing operating costs..
Check Stock

BestEquip Metal Lathe 7\ x 14\

  • ...Equipped with nylon gears, this lathe machine is wear-resistant, sturdy, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splash guard provides max. protection..
  • Infinitely Variable Speeds: Spindle speed from 0-2250 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The hardness and accuracy of the v-slide ways are obtained by raw material, heat hardening and grinding. Emergency stop button included..
  • Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Back splash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004" / 0.01 mm..
  • Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
  • Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works..
Check Stock