Reviews30 Ton Load Capacity

Floor Jack,2 Ton Heavy Duty car jack,Lifting Range 5-1/8" to 13",Hydraulic Low Profile Trolley Service Floor Jack,4,000 lb Capacity,Blue(AA051)

  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13".
  • The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • The floor jack has a large saddle surface area for better contact with the load being supported.
  • Heavy duty steel construction provides long term durability，Built-in safety valve provides overload protection.
  • Service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
Check Stock

Stark Set of 2PCS 10-Ton High Jack Stand Pin Type Stand 10-Ton (20,000 lb) Capacity 18-1/2\ to 30\ Adjustable Height

  • Various Applications - Mainly used in maintenance of vehicle, home appliance, pipeline, machinery and non-automatic vehicles..
  • Secure and Safe - Multiple hole locations in the support tube make pin facilitated height adjustments quick, easy & secure.
  • Strength and Stability - The wide, solid four leg steel base and support tubes are made of heavy schedule pipe for superior strength and stability..
  • Large Saddle and Huge Lifting Capacity- The large saddle with locating lugs support and positions vehicle frames.
  • Super large lifting capacity: 10T(20,000 lbs), saving time and labor on lifting, increasing working efficiency..
  • Adjustable Height Range - Adjustable height ranges from 18-1/2" to 30" with a 10 ton (20,000 lb) load capacity.
Check Stock

The Aviators

  • Engine leveler has a 3/4 ton (1,500 lb) load capacity and is made from rugged, top quality structural steel.
  • It's ideal for garage, workshop, and agricultural jobs.
  • Fully adjustable, with 3 position chain mount holes to accommodate various engine configurations.
  • Features (4) 14" length chains, each equipped with an L-bracket assembly.
  • Simply attach the chains to the engine and use the crank handle for quick and ease adjustments with the threaded shaft, which balances the load with ease.
Check Stock

K Tool International 1000 lb. Single Stage Transmission Jack 71 Inch Range Double Speed Pump Foot Pedal Activation .5 ton Capacity; KTI63502A

  • [SINGLE STAGE TRANSMISSION JACK] - Foot pedal easily raises single ram under load and provides safe and controlled lowering of load.
  • [LIFT RANGE] - 43.625 inch - 71inch Extended to reach a maximum height of 71 inches.
  • [SPEED] - Double speed pump gets to the load much faster than standard pumps.
  • [WEIGHT CAPACITY] - Single stage transmission jack with 1000 pounds capacity (1/2 TON).
  • [SAFETY] - The 123 lb Single Stage Jack provides extra stability for your transmission lift.
Check Stock

BestEquip Manual Arbor Press 1 Ton Heavy Duty Arbor Press with 4-5/8 Inch Maximum Height Manual Desktop Arbor Press Cast Iron Material for Riveting Punching Holes

  • Easy Operation & 2 Ton: This arbor press attachment can apply 2 ton of force to facilitate installation, removal, and pressing of items by lowering....
  • Premium Iron Material: Made of high quality iron material, this 2 ton arbor press features simple structure, stability and reliability, offering....
  • Slotted Table-Plate: The hand press comes with an anvil plate, which measures 6.7in/170mm diameter. It is slotted for various application and can be....
  • Strengthened Base: Designed with thickened and solid base, pre-drilled for mounting on either a bench or pedestal to keep the rivet press sturdy, to....
  • Various Application: This arbor press 2 ton load capacity is suitable for riveting, squeezing, punching, bending, and other pressing applications with....
Check Stock

SuperHandy Manual Chain Hoist Come Along 1/2 Ton 1100Lbs Capacity 5' Foot Lift 2 Heavy Duty Hooks Commercial Grade Steel Construction Building Garages Warehouse Automotive Machinery

  • SPECS - This Hoist has an Aluminum Alloy Hand Wheel for lifting or dragging at a MAX Lift of 5 Feet, Head Room of 10" inch and Load Chain Diameter of 4.3mm at a MAX weight capacity of 1/2 TON 1100LBS (500Kg) of working load capacity.
  • RESILIENT - The heavy duty 20MN2 Alloy Steel Chain and milled steel gears are premium black oxide finished, heat-treated forged, cold rolled forged steel hoist body for great durability.
  • Utilizing a Dual Pawl Brake System, (2) Ductile Drop-Forged Safety Stamped Latches.
  • QUALITY DESIGN - This Hoist is built to meet ASME Overhead Hoists (underhung) regulations under OSHA B30.21 and ASME HST-3 standards.
  • Our compact design requires low headroom.
  • Our hoists use load sharing gears, making heavy loads easy.
  • SAFETY - SuperHandy Hoists are versatile but for the use that was intended and designed for.
  • Do NOT use our hoists for non-recommended applications.
  • The ergonomic rubber hand grip provides better comfort and security.
  • BEST APPLICATION - Use for lifting/dragging at Construction Sites, Garages, Warehouses, Ship Building Wharves/Docks, Automotive Facilities, Workshops, Installation, Mines, Factories and Farms.
  • Included is a handy storage bag and shoulder strap for easy carry.
Check Stock

BEETRO 3 Ton Electric Car Jack 12V Scissor Jack Lift with Electric Wrench, Electric Jack for Car Sedan SUV Tire Changing

  • RATED CAPACITY : The maximum load capacity of BEETRO car jack is up to 3 ton(6600 pounds), lifting height is 5.5 -16.54 inches. Two removable raised heads are respectively designed for vehicles of different heights, suitable for most vehicles under 3 ton, Sedan, SUV, MPV etc. NOTES: Never used the jack on sloped ground. Never use it on truck or over 3 ton vehicles. Start car engine before operation,ensure sufficient electricity..
  • TWO WAY POWER SUPPLY : This 12v jack is cigarette lighter or car battery powered, and comes with a 11.5 foot power cable, long enough to go through the 4 tires without changing the power source..
  • EASY TO USE : Electric scissor jack is simple to operate, just press 2 switches to lift or lower your car, get rid of laborious and tedious manual working. It just takes about 2 minutes to lift a car, greatly cut repairing time. Perfect for car's owners change tire in emergency, especially best choice for women..
  • HIGHER SECURITY: This 3 ton scissor jack adapts heavy-duty steel construction which features to strong bearing capacity and distortion resistance. It will automatically stop lifting when it r....
Check Stock

HPDMC 3 Ton (6,000 lb) Capacity 48\ Ratcheting Off Road Utility Farm Jack

  • Features a lifting range of 5.12" to 40" and a 3 ton (6,000 lb) load capacity.
  • Multi-directional jack is designed to be used vertically and horizontally.
  • Great for off-road and rough environments, farm-related applications, and as an emergency fire and rescue tool.
  • Fast lifting mechanism ensures lifting speed and safety.
  • Rust-resistant, powder coated finish and zinc-plated hardware.
  • Ratcheting off-road utility farm jack is ideal for any application that deals with lifting, pulling, clamping, winching, and spreading.
  • Tested for reliability and safety to meet ASME B30.1 standards.
  • Includes a limited 1 year manufacturer warranty.
Check Stock

BIG RED T82002-BR Torin Hydraulic Trolley Service/Floor Jack, 2 Ton (4,000 lb) Capacity, Red

  • Hydraulic trolley jack is constructed with heavy duty steel, providing long term durability.
  • Safety overload system to prevent use beyond rated capacity.
  • The jack stand has a large saddle surface area for better contact with the load being supported.
  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5.6" and a maximum height of 13".
  • The trolley jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
Check Stock

INTBUYING Hydraulic Machine Toe Jack Lift 2.5/5 TON Spreading Machine Oil Rigging

  • ✅Capacity: 5/2.5T: The load capacity can reach up to 5 Ton/11000 lbs (Top), and 2.5 Ton/5500 lbs (Toe).It is powerful to be a jack tool for automotive repair and emergency..
  • ✅Note: Before operating the toe jack should be placed securely to avoid the swing. It is strictly prohibited weight did not put thestability of the rise in operating, resulting in the tilt happens. Strictly prohibited the super-load use. Body parts (hands, feet. etc.) under working conditions put heavy objects on the bottom is strictly prohibited. Keep the product clean after use..
  • ✅This products use imported jacks, high quality steel after welding heat treatment. The specific structure is simple, easy to use and durable, high quality, safe and reliable. From the top dual-use, ease of operation of the low is a versatile lifting tool..
  • ✅Durable: Built-in two rugged wear-resistant steel rings, the piston rod, and the inner bar are not in contact, so the friction of the inner bar can be reduced to the least, which makes it more durable..
  • ✅Wide Application: For lifting farm vehicles, heavy-duty machinery, industrial equipment, military applications. Small size with big liftng, suitable for a variety of vehicles, such as family cars. It is also suitable for a variety of terrains....
Check Stock

Torin TRA8335 33\ Ratcheting Off Road Utility Farm Jack, 3 Ton (6,000 lb) Capacity, Black

  • Ratcheting off-road/utility farm jack is ideal for any application that deals with lifting, pulling, clamping, winching, and spreading.
  • Features a lifting range of 5.12" to 26.38" and a 3 ton (6,000 lb) load capacity.
  • Multi-directional jack is designed to be used vertically and horizontally.
  • Great for off-road and rough environments, farm-related applications, and as an emergency fire and rescue tool.
  • Fast lifting mechanism ensures lifting speed and safety.
  • Rust-resistant, powder coated finish and zinc-plated hardware.
  • Tested for reliability and safety to meet ASME B30.1 standards.
Check Stock