Reviews304 Flange

Plumbing Cover Plates, Escutcheon plate, Stainless Split Flange, Hinged Floor and Ceiling Plates for than 21mm Dia Pipe (Fits 1/2 Inch IPS), Chrome Finish, 6 PCS

  • Size - The Shower Flange is suitable for pipes of any material less than 21mm in diameter. Please measure your pipe to make sure that it matches the measurements on this product..
  • Material - The hinged floor and ceiling plate flange cover is made of 304 stainless steel, which has great heat resistance and corrosion resistance, that can be applied for long time use. Chrome Finish..
  • Easy Installation - The hinged floor and ceiling plate flange cover can be easily installed without experience a hassle-free installation with no expert plumbing skills or tools..
  • Application - The hinged floor and ceiling plate cover can be applied at the home, office, shopping mall and so on. Also can be installed at kitchen faucets, sinks, toilets, and so on..
  • Escutcheon flange with tight grip - used to cover and close the gaps between the pipe/ IPS and the inside diameter of the floor or ceiling to avoid damage and leakage..
Check Stock

4 1/4 Inch Round Shower Floor Drain Grate with 2 Inch Threaded Adaptor and Drain Base Flange, Brushed Gold

  • 【Size】- 4.5" outside diameter, with 4.25" screw mount round drain grate. Base flange connects to 2" or 3" drain waste pipe, fit standard U.S. plumbing connection.
  • 【Material】- This round shower drain made of sus 304 stainless steel, base flange made of ABS. High quality to enhance the longevity.
  • 【Design】- This 4-1/4" round shower drain grate with large aperture grid design to enhance water flowing, height adjustable design with threaded adaptor. Brushed Gold finish to prevent scratches, corrosion and tarnishing.
  • 【Installation】- Fits US NO HUB Drain Base System. Works with maximum 2.36 inch outside diameter and 3 inch inside diameter drain pipe. Can be used in bathroom, kitchen, balcony, roof, garage, basement and toilet, etc..
  • 【Packing】- Come as a combo set, no need to assemble. Complete accessories include square 4 1/4" drain grate, threaded adaptor, rubber gasket, base flange. Brushed Gold finish..
Check Stock

BOTEMY B9179 Extended Garbage Disposal Flange with Basket Strainer Stopper, Deep Kitchen Sink Flange for 3-1/2 Inch Standard Sink Drain Hole (Garbage Disposal Flange and Strainer Stopper, Polished)

  • ✦RELIABLE QUALITY : This extended flange strainer is made of 304 premium stainless steel, can be used in water for a long time without rusting, corrosion resistant and durable..
  • ✦EXTENDED GARBAGE DISPOSAL FLANGE : Stainless steel extended sink flange fits most standard waste garbage disposal units, 4 1/2″ wide and 2 6/8″ deep for thick kitchen sinks like granite, marble, quartz, etc...
  • ✦BUILT-IN STRAINER BASKET : The removable deep basket strainer easily catches the food residues, preventing your silverware, jewelry and other non-food related items from slipping into the disposal unit as you drain..
  • ✦APPLICABILITY : Extended disposal flange with deep basket strainer fits 3-1/2″ US standard sink drain and is perfectly compatible with most US kitchen composite and stainless steel sinks..
  • ✦EASY TO USE : The strainer basket handle pushes down for water storage lifts up to drain, making it easy to remove and clean waste, and helps bring leftovers into disposal..
Check Stock

Steel Hex Nut, Plain Finish, Grade 8, 1\-8 Threads, 1.732\ Width Across Flats, 0.887\ Height (Pack of 10)

  • Flanged hex nuts with serrated face, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface..
  • Made of high quality stainless steel 304, provides strength and protection from corrosion and tarnishing..
  • Package Included: 50 PCS M5-0.80 serrated flange hex nuts..
Check Stock

M10-1.5 x 50mm Flanged Hex Head Bolts Flange Hexagon Screws, Stainless Steel 18-8 (304), Plain Finish, DIN 6921, 5 PCS

  • High quality Grade A2-70 Stainless Steel 18-8 (304) provides strength and offers good corrosion resistance in many environments..
  • Flange bolts have a flange on the bottom of the head that distributes the load like a washer..
  • Thread Diameter 10 mm, Thread Size 1.5 mm (M10), Screw Length 50 mm..
  • Flanged Bolts are great to have around for use in wood and wet environments..
Check Stock

Prime-Line 9066858 Eye Bolts With Nuts, 3/8 inch-16 X 6 inch, Zinc Plated Steel, 20-Pack

  • High quality Grade A2-70 Stainless Steel 18-8 (304) provides strength and offers good corrosion resistance in many environments..
  • Flange bolts have a flange on the bottom of the head that distributes the load like a washer..
  • Thread Diameter 6mm, Thread Size 1.0mm (M6), Screw Length 12/16/20/25/30mm..
  • Package Included: M6 x 12mm (5 PCS), 16mm (5 PCS), 20mm (5 PCS), 25mm (5 PCS), 30mm (5 PCS), and all come in a quality plastic storage box..
  • Flanged Bolts are great to have around for use in wood and wet environments..
Check Stock

DERNORD Heating Element U Type Electrical Brewing Water Boiler Heater 1-1/2 Inch NPT Male Flange (208V 3000W)

  • SUS304 Tri-clamp U Type heating element provides 3000w 208v of power.
  • Nylon Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm.
  • With SUS304 Materials Cap,easy to Install.
  • Prevent dry firing, lime deposits, and sand that would burn out ordinary elements.
Check Stock

QiiMii Stainless Steel 304 Heavy Duty Tri Clamp Clover Single Pin with Wing Nut for Ferrule TC 2 inch 10 pack

  • Tube OD: 2 Inch, Flange Size: 64MM, Fits 2 Inch Tri-clamp.
  • Type: stainless steel 304 Single pin heavy duty clamp with cross hole wing nut.
  • Fit for all other homebrew stuff sanitary fittings.
  • Free Bonus: Buy Clamps, Get Gasket For Free.
Check Stock

Sink Flange for Garbage Disposal and Sink Stopper Stainless Steel Fit Universal 3-1/2 Inch Standard Sink Drain Openings Kitchen Sink Garbage Disposal Replacement Accessories (Matte Black)

  • PREMIUM MATERIAL: 304 Grade Stainless Steel Construction for Maximum Durability, Resistant to Corrosion & Rust. Longer service life, Value for money【Note: Do not pour high-temperature oil or water directly into the sink drain, which will easily cause the glue on the surface to dissolve and fade】.
  • UNIVERSAL STANDARD SIZE: Fits 3-1/2 inch Diameter Sink Drain Openings. Suitable for Standard Garbage Disposal Flange.
  • EASY TO INSTALL: Tight seal kitchen sink and flange via sink drain gasket or plumbers putty, and even be a plumber yourself.
  • CHOOSE YOUR COLOR: The black sink flange better match your modern kitchen decor, Perfect for matte black kitchen sinks or kitchen faucets.
  • EASY TO CLEAN: The stoppers with rubber rings are easy to put and take, It is convenient to dispose of garbage and keep the kitchen clean.
Check Stock

Ruvati Deep Garbage Disposal Flange with Basket Strainer for Kitchen Sinks - Stainless Steel - RVA1049ST

  • Extended DEEP GARBAGE DISPOSAL FLANGE designed for both thick fireclay sinks (up to 2" thickness) as well as normal stainless steel sinks..
  • Fits all sinks with standard 3.5 inch drain openings. Compatible with all INSINKERATOR model garbage disposals..
  • Includes DEEP BASKET STRAINER that helps trap debris and can be easily pulled out and emptied into your trash..
  • Made of thick 304-grade STAINLESS STEEL for long lasting DURABILITY and strength. | Includes extended mounting screws that allow this extended flange to be used with stainless steel sinks..
  • Compatible with optional Ruvati decorative drain cover (Sold separately. Model # RVA1035). | 1 Year Limited Warranty - Ruvati USA.
Check Stock

SYKRSS 3.0 Mild Steel V Band Clamp Flat Flange Kit Assembly

  • Material-Each assembly consists of two Mild Steel flanges and one 304 Stainless Steel V-band clamp. The V-band clamp design allows for a gasket free....
  • Application- The V-Band Clamps makes it easy to install and remove intercooler systems and turbo parts, such as charge piping, intake pipes and the....
  • Excellent Sealing-The V-band clamp applies uniform force around the flange maximizing the seal potential of the flanges, Once tightened, friction....
  • The 3.0" v band clamp fit for 3 Inch O.D. pipe. Of course, we can't only provide you with mild steel V band flange clamp kit, also have stainless....
  • This item is not vehicle specific. It is compatible with a wide range of applications. Please review the specifications and verify compatibility prior....
Check Stock