Reviews304 Seamless Pipe

PATIKIL Thermowell Pipe Immersion Well 1/4 ID 9/32 OD 20 Stainless Steel 304 for Weldless Thermowell Brewing Thermometer 2pcs

  • Thermowell pipe is mainly used for sensor protection pipe. Temperature sensors are placed in thermowell pipes, which can be used to measure temperatures, such as water tank temperature measurement and temperature measurement during the brewing.
  • Thermowell pipe, is in size of : 6mm/0.24-inch inner dia, 7mm/0.28-inch outer dia, 500mm/20-inch length.
  • 304 stainless steel material, sturdy and durable, not easy to rust.
  • Easy to use, easy to install and operate.
  • Steps of installation: 1. Choose the right size thermowell pipe.
  • 2. Remove the thermowell pipe to be replaced.
  • Please pay attention to choose the appropriate size of thermowell pipe, especially the diameter and length of the thermowell pipe.
Check Stock

Dernord 2 Inch (OD64) Tri-clamp Ripple Heating Element Electric Water Heater 5500W 240V

  • Stainless Steel Tri-clover Clamp 2 Inch (OD64), fit 2″(51mm) pipe if that pipe has a 2″ flange for triclamp.
  • With SUS304 Materials Cap,easy to Install and fits Standard 2″ tri-clover coupler of American.
  • Nylon Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm.
  • SUS304 Tri-clamp Ripple Foldback heating element provides 5500w 240v of power.
  • Resists dry firing, lime deposits, and sand that would burn out ordinary elements.
Check Stock

Rodeel 24 PCS Fishing Leaders Wire with 49 Strands Tooth Proof Stainless Steel with swivels

  • Package Content:24pcs fishing wire leaders rigs.
  • Length: 25cm/0.82inch,Line Diameter: 1mm/0.04inch,Steel wire Pulling Force:40KG/88.18LB.
  • Material:High-strength stainless steel wire +hot air pipe.
  • Design - 8-ring interface ring solves the winding problem, and use hot air pipe to wrap the snap and swivel, remain stable underwater, fish loading rate is higher.
  • Lamination fishing line- 304 stainless steel 49 stranded wire,very soft and strong. The 49 strand design makes it very durable, and the 304 lamination stainless steel wire used will not rust..
Check Stock

Round 4-1/4Inch Shower Drain, 304 Stainless Steel Brushed Gold Shower Floor Drain, Quadrato Pattern Grate Removable,Includes Drain Flange Kit

  • [Size] 4-1/4Inch 2.36" central outlet. 20-25 L/min high flow capability, solving ponding problem for bathroom, pool effectively. Thicken steel cover offer a good sealing ability,Strong and sturdy. Base flange connects to drain pipe, fit standard U.S. plumbing connection..
  • [Material] This round drain shower made standard 304 stainless steel, base flange made of PVC construction. Drain surface plating brushed finished, protect against corrosion, scratches and rust for long-lasting durability..
  • [Installation] Round shower drain outlet easy to unload, fits US NO HUB Drain Base System. Can be used in bathroom, kitchen,hotel,pool, balconies, outdoor,garage, basement and toilet etc..
  • [Design] The round drain cover with grid design to enhance water flowing. Prevent large items from falling,Removable hair strainer.Embedded design offer a invisible and seamless look on your floor. Thicken steel cover offer a good sealing ability..
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock

DNYSYSJ Kitchen Commercial Sink with 2 Bowls,2 Compartment Utility Sink with 2 Drainer & 2 Shelves,304 Stainless Steel Freestanding Kitchen Sink

  • 【Main Parameters】Color: silver,Material: 304# stainless steel Surface treatment: wire drawing technology,Number of bowls: 2 Bowl shape: rectangular,Maximum load: 150kg,Bowl size: 33x33x20cm,Platform size: 35x45cm,Overall size: 120x85x45cm Inlet pipe: 80cm (31.5in),Packing size: 125*50*35cm,Weight: 17kg.
  • 【Premium Quality】Our double utility sink is made of sturdy 304 stainless steel, super easy to clean and keep hygienic, with a polished surface, with better anti-corrosion effect and long-lasting effect, and it will definitely look shiny like a kitchen! The spacious drainer provides you with enough space to dry everything from cutlery, plates to pots and pans..
  • 【Easy to Use and Clean】It adopts streamlined rounded corners and edge design, no dead corners, convenient for daily washing, double bowls can be placed independently and easy to clean. Can be cleaned with neutral soap to ensure anti-rust gloss life.
  • 【Double Shelves Design】Double shelves can store cleaning equipment and accessories, two stainless steel drainage devices with two detachable filters can prevent food and debris from clogging the drainage pipe, and the reinforced table can be used for cutting pork chops and steaks, etc., gooseneck 360 degree rotation Faucet, can prod....
Check Stock

LGXEnzhuo Pipe Cutter Pipeline Hydraulic Pipe Cutting Machine Fire Steel Pipe Cutting Machine Can Cut Pipe Diameter 40-280mm 220V 750W

  • 【WIDE APPLICATION】Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • 【PARAMETER】Diameter of steel pipe that can be cut:40-280mm.
  • The wall thickness of the steel pipe that can be cut:3-6mm.
  • 【HIGH EFFICIENCY】Copper motor, power 750W, with high efficiency, stable performance and long service life..
  • 【HIGH STRENGTH BLADE】High strength blade is made of high quality steel to ensure good cutting effect..
  • 【DURABLE】Thicker roller, more wear-resistant.Strong, sturdy frame, suitable for heavy duty operation..
Check Stock

NIREU 6 Inch Square Shower Floor Drain with Removable Cover Grid Grate, SUS 304 Stainless Steel, Watermark&CUPC Certified, Chrome Finished

  • 6 inch length, 6 inch width square drain fits perfectly most square tiles. 2 inch bottom outlet, 60L/min high flow capability, fits US NO HUB Drain Base System, solving bathroom drainage problem effectively..
  • The square drain made of US ASTM standard 304 Stainless Steel, base flange made of ABS construction, surface Chrome finished, protect against corrosion, scratches and rust for long-lasting durability. WATERMARK&cUPC certified..
  • The removable cover grid grate with 64 square holes design, it can prevent hair and larger objects from falling into the sewer and enhance water flowing. The embedded design offer a invisible and seamless look on your floor..
  • Easy to install with clear instructions. Base flange connects to drain pipe, fit standard U.S. plumbing connection. It can be used in bathroom, kitchen, pool, lavaroty, garage, basement, toilet etc..
  • The square drain kit includes removable hair strainer/trap and lifting hook/key, you can easily lift the cover for cleaning..
Check Stock

6 Pack 3/4 inch Adjustable Pipe Bracket Clamp, Stainless Steel Wall Ceiling Mount Pipe Support Pipe Hanger Clamp, Split Ring Hanger ID 15mm-19mm

  • 15-19mm Pipe Strap Clamp: The Pipe Clamp fits for 1/2 inch/15mm to 3/4 inch/19mm diameter pipe, the nut is M8..
  • Stainless Steel Pole Clamp: The split ring hanger is made of 304 stainless steel, it durable and offers rust protection..
  • Package included: 6 pack Pipe Bracket Clamp. Length: 2.2 inch/55mm, width: 1.1/ 28mm..
  • Easy to Use: Easy to install, pipe bracket clamp can be installed on the wall or ceiling..
  • Applications: These adjustable pipe support bracket clamp are suitable for both industrial and home applications..
Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock

EVIL ENERGY 2.75 ID to 3 OD Exhaust Pipe Reducer Adapter 304 Stainless Steel Universal

  • Size: Small Diameter: 2.75" (2 3/4inch) ID/69.85mm (Fits over 2.75" OD Pipe). Large Diameter: 3" OD/76.20mm (Fits inside 3" ID Component). Length may....
  • Fitment: Universal fit for all exhaust / turbo / intercooler / intake piping connection. Welding is recommended..
  • Category: Pipe to Component (Use when your pipe is smaller than your component).
  • Material: 304 stainless steel. Package: 1PC 2.75 inch ID to 3 inch OD exhaust reducer..
  • EVIL ENERGY provides 3-month warranty for this exhaust pipe adapter reducer. Professional installation is highly recommended. Any problem you have,....
Check Stock