Reviews30km Without Optical Attenuation

uxcell 5dB SC Fiber Optic Attenuator, SC/UPC Female to SC Male Single Mode 9/125 Adapter Green

  • [MAIN PARAMETER]: SC/UPC Female to SC Male.
  • [MATERIAL]: The core material of the adapter is ceramics..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

uxcell 3dB SC Fiber Optic Attenuator, SC/UPC Female to SC Male Single Mode 9/125 SC Adapter Green

  • [MAIN PARAMETER]: SC/UPC Female to SC Male.
  • [MATERIAL]: The core material of the adapter is ceramics..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

EZ-FIT New LC Fiber Optic LCUPC-5DB Optical Attenuator LC-UPC Fiber Attenuator 5dB Singlemode Fixed Fiber Optical Attenuator

  • [MAIN PARAMETER]: FC/UPC Female to FC/UPC Male.
  • [MATERIAL]: The core material of the adapter is ceramics..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

uxcell 3dB FC Fiber Optic Attenuator, FC/UPC to FC/UPC Single Mode 9/125 Adapter

  • Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
  • [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-15dB..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

GESD Visual Fault Locator 30km Fiber Optic Cable Tester Meter Red Light VFL with 2.5mm Universal Connector for FC/SC/ST Adapter Pen for CATV Telecommunications Engineering Maintenance

  • ...tor will emit a 650nm bright light for fiber tracing,breaks or faults in the fiber will refract the lightFiber Routing and Continuity Checking Efficiently,Creating A Bright Glow Around The Faulty Area..
  • 30KM Detection Distance & DurableStrong Light Source & Strong Penetration:30 Output Power easily penetrate 30KM of optical fiber,Continuous Wave and Pulsed Mode, constant output power Design with Stainless Steel Head and Aluminium Body to prevent crash and dust,the case ground design prevents ESD damage efficiently..
  • Wide ApplicationUniversal 2.5mm connector designed for ST,SC,FC interferes both in circle and square shape of different fiber optic cables,test for both single-mode and multi-mode cablesApply To:Integrated wiring systems and Fiber Optic engineering.
  • CATV Engineering optic network Maintenance.
  • optical device production and research. LC interface requires additional adapter..
  • 100% Money Guarantee10 years OEM factory competency, Most efficient technical support with superb processing technologyOur committed to provide the best product and services to every customer..
Check Stock

Visual Fault Locator 30KM, VFL Fiber Optic Light Source Tester 30mW, Red Light Pen Equipment for 2.5mm Universal Connector, FC/SC/ST/LC Adapter for CATV Telecommunications, Fiber Network Cable Test

  • ...tor will emit a 650nm bright light for fiber tracing,breaks or faults in the fiber will refract the lightFiber Routing and Continuity Checking Efficiently,Creating A Bright Glow Around The Faulty Area..
  • 30KM Detection Distance & DurableStrong Light Source & Strong Penetration:30 Output Power easily penetrate 30KM of optical fiber,Continuous Wave and Pulsed Mode, constant output powerDesign with Stainless Steel Head and Aluminium Body to prevent crash and dust,the case ground design prevents ESD damage efficiently..
  • Wide ApplicationUniversal 2.5mm connector designed for LC,ST,SC,FC interferes both in circle and square shape of different fiber optic cables,test for both single-mode and multi-mode cablesApply To:Integrated wiring systems and Fiber Optic engineering.
  • CATV Engineering optic network Maintenance.
  • GESD Warranty10 years OEM factory competency,Most efficient technical support with superb processing technologyOur committed to provide the best product and services to every customer,please do not hesitate to contact us,We are looking forward to your feedback..
Check Stock

LC to LC Single Mode Insensitive Fiber Patch Cord - Duplex - 2M - UPC/UPC - 9/125um OS2 100G (5 Pack) / - Beyondtech PureOptics Cable Series

  • Beyondtech high-quality and Insensitive LC to LC Fiber Grade: G.657.A2 Patch Cable Single mode 9/125 OS2 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This Beyondtech Fiber OS2 9/125 LC/LC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
  • This SM fiber has an yellow color jacket with a 3.0mm diameter. OS2 cables have a 0.36 dB/km attenuation at 1550 nm – 0.22 dB/km at 1310 nm.
  • This LC to LC Single mode Duplex OS2 fiber patch cords operate at -40ºC to +75ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • Reduced bend loss sensitivity versus standard telecom fiber patch cables: Optimal for Flexible Installations in indoor cable set-ups they could now be used in walls, ceilings, conduits (FTTH) and other bumpy surfaces without worrying about fiber bends..
Check Stock

Fastsun Car Hud Display, Head Up Display Dual Mode Dual System OBD2 GPS Multifunctional Display with Speed,Overspeed Warning, Compass,Mileage Measurement,Water Temperature,Direction,for All Vehicles

  • CLEAR DISPLAY: Floating imaging Large Screen, Wide viewing angle. HD without ghosting, Stereo imaging, No need to stick film. The floating virtual display adopts free-form surface technology to break through the traditional optical imaging concept. With 10 mufti-layer optical coatings, the image distortion is corrected, and the image has no ghosting. Immersive HUD head-up display. No matter the placement, it is clear and natural, in line with the driving sight..
  • LOTS INFORMATION DISPLAY: Some main driving information can be displayed on this head up display screen, including Speed, Clock, RPM, Water Temperature, Voltage, Fuel consumption, Altitude, Mileage, Driving Time, Power Test, Number of Satellites. With the stereo projection,help you to see clearly while driving, just keep your eyes on the road..
  • MULTI REMINDERS AND ALARM: There are 6 kinds of humanized alarm settings to help you know more data of the car: Over speed alarm, RPM alarm, voltage alarm, Water temperature alarm, fault code removal, fatigue driving reminder. Set different parameter over-limit alarms, icon flashing alarms, sound alarms to improve driving safety. Muti reminders help you avoid the accidents and keep your driving safely..
  • Three FUEL CONSUMPTION AUTOMATIC SWITCHING: Insta....
Check Stock

VFLTOOL Fiber Optic Termination Tool Kit - 9 in 1 Assembly FTTH tool kit with FC-6S Cleaver Optical Power Meter Finder - 30km Visual Fault Locator Optical Pliers Cable Cutter Stripper

  • FTTH Equipent Accessories: 9 in 1 Assembly FTTH tool kit Includes Optical Power Meter which works with LC, FC, ST, SCAPC, 30km Visual Fault Locator....
  • Optical fiber cold construction kit is Fttx FTTH rapid connection in the construction of rubber insulated wire stripping, fiber cutting, cleaning and....
  • For All Tools and Parts Included: It is an ideal tool for construction operators. Can be used for indoor cable stripping coating layer and positioning....
  • Portable & Travel: Light weight small size easy to operate Can be used for indoor cable stripping coating layer and positioning length It can be used....
  • We source our own fiber products for HDTV, SDI, and Analog MATV systems. your mission critical supplier for all Optical Fiber needs. FTTH optical....
Check Stock

BEYONDTECH SC/APC to SC/APC Fiber Patch Cable Single Mode Simplex - 1m (3.28ft) - 9/125um OS1 / 3.0mm LSZH (1 Pack) - Fios Cable Replacement PureOptics Cable Series

  • ...1 9/125 SC/SC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications. Cable also know as: Fiber Optic Internet Cable..
  • This SM fiber has an yellow color jacket with a 3.0mm diameter. OS2 cables have a 0.36 dB/km attenuation at 1550 nm - 0.22 dB/km at 1310 nm..
  • This SC to SC Single mode Simplex OS2 fiber patch cords operate at -40ºC to +75ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • Reduced bend loss sensitivity versus standard telecom fiber patch cables: Optimal for Flexible Installations in indoor cable set-ups they could now be used in walls, ceilings, conduits (FTTH) and other bumpy surfaces without worrying about fiber bends..
Check Stock

Open SFP Slot A Pair of 1.25G/s Gigabit Fiber Ethernet Media Converter 10/100/1000Base-Tx to 1000Base-SX SMF RJ45 to SFP Slot, Support SFP Gigabit modules up to 120KM(2 Pack)

  • What You Get: 2pcs Gigabit Ethernet SFP Slot media converters.
  • 1 x User’s Manual. Support wide power supply voltage (100V-240V), Power Supply: 5V-1A, UL Certified..
  • Supports Multi-mode or Single-mode fiber using different SFP modules (not including any SFP transceiver).
  • Convert and extend different networks over a LC fiber cable connection up to 120KM (depends on the SFP transceiver).
  • RJ45 Port: 10M/100M/1000M Auto-negotiation, full Duplex or half Duplex, Auto-negotiation, Supports MDI/MDIX auto-crossover, Complies with IEEE 802.3/802.3u/802.3z/802.3ab..
  • Fiber Optical Port: 1.25Gbps 1310-nm wavelength SFP port, connecting the BiDi transceivers up to 30-120km.
  • Fiber Type: SMF, Cable Type: UTP/STP Cat.5e for 100 meters..
  • Plug & Play: Simply plug in optical port and RJ45 port, and it will work immediatelly. Status LED's for TX, FX LINK/ACT, POWER, FDX to easily monitor network status. Supports jumbo frame size 9K bytes.
  • Supports working temperature range from 0°C to 60°C..
Check Stock