Reviews30mm Scope Mount 2

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 20 MOA | Black

  • Built specifically for long range scopes – 6-24x magnification scopes and above – with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes – with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
  • Available in three styles – a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

PRI Polymer Ring Inserts - 30mm to 1 Inch. by Unknown

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

WestHunter Offset Cantilever Dual Ring Picatinny QD Scope Mount, 1 inch 30 mm Quick Release Scope Rings | Black

  • Position the center of the scope tube at a height of 1.42 in / 36 mm from the base.
  • The high profile QD cantilever scope mount fits for both 30mm and 25.4 mm (1 inch) tube optics with up to a 70mm outer objective diameter.
  • Scope mount with qick detach locks for Picatinny rail, can freely adjust the tightness of the base to ensure stability.
  • Precision CNC Machined from 6063 T5 aircraft-grade aluminum alloy and finished in anodizing.
  • Easy installation, perfect for shooters(Sold 1Pcs mount per package).
Check Stock

Rail Riser Mount for Red Dot Sights, Optics and Accessories, Full Size Scope Riser Mount for Scopes

  • ☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • ☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope..
  • ☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'').
  • ☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

ROUP Flashlight Mount Holder, Gun Rifle Shotgun Flashlight Mount Clamp Clip, Sturdy Quick Release Mount Holder for Multiple Tube Flashlight Torch Laser Scope Sight Telescope Diameter 25mm-30mm

  • The flashlight mount holder fits for body diameter 25mm-30mm. Please make sure the size of the product can meet your needs before you place an order (both objects should be the same diameter)..
  • The scope mount working with flashlights/torches/telescope sights (particularly suitable for HS-802 501B 502B hunting flashlight). Wide range of uses, ideal for hunting..
  • Very versatile mount that accommodates different diameter and lights at the same time..
  • Hole size — 25mm~30mm. Weight — 90g/3.2oz. Material — hight quality plastic..
  • Easy on and off. Does not scratch the scope. Attaching a flashlight to your night vision scope..
Check Stock

Athlon Optics Precision 34mm MSR Ring, Black (701007)

  • Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'').
  • With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Monstrum Slim Profile Series Offset Scope Mount with Integrated Level Bubble | 30 mm Diameter

  • Dual ring scope mount available for standard 1 inch or for 30 mm tube scopes tubes.
  • Scope mounts come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Mounts to any flat top Picatinny rail equipped rifle platform.
  • 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
  • Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount.
Check Stock

Ade Advanced Optics PS001C 30mm Offset Cantilever One Piece Rifle Scope Mount

  • This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2" for better eye relief..
  • ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
  • Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
  • The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
  • Height" 1.5". Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..
Check Stock

Tipton Best Gun Vise for Cleaning, Gunsmithing and Gun Maintenance and Wheeler Scope Mounting Kit Combo, 1-Inch/30mm - 545454

  • EASE OF USE: L-shape center support holds break-open guns securely and separate quick-release cam blocks move independently to accommodate any stock shape.
  • VERSATILITY: Easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects.
  • Kit includes:Torque Screwdriver Wrench, 10 screwdriver bits, Wheeler Level-Level-Level, 1" scope ring lapping bar, 30mm scope ring lapping bar, 1" scope ring alignment bars, 30mm scope ring alignment bars, lapping bar handle, lapping compound, thread lock.
  • Provides virtually everything needed to properly mount any 1-inch or 30mm scope.
Check Stock

BESTSIGHT Scope Ring 1inch&30mm Scope Mount High Profile Multi Picatinny Weaver Rail Scope Mount kit2 pcs

  • Double scope ring mount for Picatinny/ Weaver Rail (20mm)..
  • 1 inch or 30mm diameter scope rings for mounting standard 1" /30mm tube rifle scopes.
  • Precision machining from aircraft-grade aluminum alloy, solid and sturdy construction..
  • Multifunctional Scope Mounts attachment of laser/flashlight mounts, red dot sights or rifle scope accessories..
  • Regardless of installation or removal, you need to remove 12 screws.
Check Stock

Precision Long Range Shooting And Hunting: Choosing and using a Long Range Rifle Scope

  • Hunting light red green white 3 light colors, push button and pressure pad 2 switch options, scope/barrel mounts, USB charger and a gift hard carrying case, free 1-year warranty for hunting flashlight kit, lifetime for coiled wire tailcap tactical switch（velcro backing include）.
  • Red, Green hunting & White tactical picatinny flashlight 1000 lumens 350 yards 5 hours runtime, Upgraded red LED modules from XP-E (620nm) to now XP-G3 Photo Red (660nm) , deeper red less visible at night to animals helps eyesight targeting.
  • Cheap red lights 620 nm closer to the color orange, Vastfire High quality red hunting lights are a deep red color 660 nm (animals cannot visualize red at 660 nm) , with quality lenses （flat lens ultra-clear properties to maximize light output ）and the deepest Aluminum Smooth SMO Reflector（55mm deep, 42mm diameter） for maximizing the shining distance.
  • IPX6 waterproof best for fields Various Animal Hunting: The white light is for pathfinding, measuring distance and long-range searching, red light for deer, coyotes and other predators hunting, and green light for feral hogs night hunting.
  • Compact size as hand held spotlight, Dimensions: Length: 7” (178mm), Head diameter: 1.65” (42mm), Body Diamet....
Check Stock