Reviews3528 Strip

12V DC Power Supply 2A 24W Adaptor, SANSUN 12 Volt Power Supply for LED Strip Lights, AC120V to DC12V Transformers (Pack of 5)

  • 12V Power Supply, DC 12Volt 2Amps Output, 24 Watt Max Wattage. Enough power to run one roll 16.4ft of 300 Units 3528 LED strip. However, YOU CAN NOT GO UP TO 16.4ft of 600 Units 3528 or 16.4ft of 300 Units 5050, the consequences of hooking too many LEDs would be overheating and flicker failure..
  • 4FT Output Cable with a Standard 5.5 x 2.1mm DC jack, Central Positive(+), Outer Negative(-)..
  • Easy Installation, Free Get a Female Terminal Connector, no soldering no electrician or electrical experience required..
  • Used for LED Strip Lights, LED table lamp and 12V DC devices..
  • [IMPORTANT] It's NOT a Charger, please check before buying..
Check Stock

3528 2-pin 8mm LED Connector kit led Strip Connector L-Shaped Connector 2-pin Right-Angle Connector T-Shaped Connector Solderless Seamless Connector Jumper Connector (8mm)

  • The LED connector kit is suitable for 2835 3528 2-pin 8mm LED light strips. It is easy to install. Connect the positive and negative poles of the connector. Just insert the light strip into the connector and clamp the cover. No need for welding and other processes.
  • Strip connectors include: 8 XL connectors, 2 XT connectors, 2 X female and DC connectors, 2 X DC power supply 2way distributors, 20X LED seamless connectors, 4 X 3825 2pin LED with pigtails Connector, 6 X 3528 2-pin LED light with jumper connector, 20 X set of screw fixing clips, 20 X self-adhesive light bar mounting clip.
  • Note: When the waterproof LED light strip is connected with these LED light strip connectors, the silicone on the surface of the welding area must be peeled off.
  • 2-pin 8mm LED connector supports 0-4A current and 0-24V voltage input, and the heat resistance rating is -20~100 degrees.
  • 100% satisfaction guarantee: GOOCHAN connector kits are sold with a 30-day money-back guarantee. If you have any questions about this product, please feel free to contact us. We will solve the problem for you as soon as possible after receiving the information.
Check Stock

Universal 32 LED Light Strip,Tail Trailer Brake Stop Turn Signal 3528 SMD 8\ Flexible LED License Plate Lights for Motorcycle Bike ATV Car RV SUV

  • 【SOFT RUBBER STRIP】3528-SMD LED Turn SIgnal Brake Tail light.Super bright 3528 LED Chip is 9 Times Brighter than Original Incandescent Bulbs.
  • 【FLEXIBLE】Easy to mount to curved fenders or installed in between the gap and virtually invisible., Mount Almost Anywhere with Double-sided adhesive straps,.
  • 【LED LIGHT COLOR】 modified two-color traffic safety light strip .Red for brake and stop, Amber for turn signal. Add style and brighten your bike Installs easily, Mount Almost Anywhere.
  • 【WATERPROOF】with durable PVC rubber cover that can be used in rainy day,provides superior lighting performance ,never rust..
  • 【FITMENT】For Motorcycle Bike ATV Car RV SUV, Car License Plate Lights, Trailer lights. Lots of Common uses.
Check Stock

Kit Accessories Controller + 44-Key IR Remote Control

  • ◆ Fit for RGB LED Strip Light: Suitable for 5050, 3528, 2835 RGB led strip light with 4-Pin connectors. Not for RGBW strips which has 5-pin....
  • ◆ IR remote control: The working range of the remote control is 30 feet.
  • please note that the remote control must be pointed at the controller....
  • ◆ Multi-function: has 12 kinds of static colors, brightness adjustment.
  • Static/ Flash/ Strobe/ Fade-change/ RGB Smooth-change.
  • ◆ Safe to Use: Input DC 24V, Max output current is 5.8A. The remote controller is Low voltage, Low heat, no radiation, it is safe and touchable.
  • ◆ 1 to 2 Controller: This led strip Controller can connector 2 roll led strip.
Check Stock

12V 2A Power Supply Adapter, SANSUN 120VAC to 12VDC Transformer with 5.5x2.5mm DC Output Jack, 12 Volt 2 Amp Power Supply for LED Module LED Strip Light (1pcs)

  • 12V 2A Power Supply, 24 Watt Max Wattage. Enough power to run one roll 16.4ft of 300 Units 3528 LED strip. However, can NOT go up to 16.4ft of 600 Units 3528 or 16.4ft of 300 Units 5050, the consequences of hooking too many LEDs would be overheating and flicker failure..
  • 4FT Output Cable with a Standard 5.5 x 2.1mm DC jack, Central Positive(+), Outer Negative(-)..
  • Easy Installation, Free Get a Female Terminal Connector, no soldering no electrician or electrical experience required..
  • Used for LED Strip Lights, LED table lamp and 12V DC devices..
  • [IMPORTANT] It's NOT a Charger, please check before buying..
Check Stock

RGBZONE 2 Pack 3M 9.9ft Extension Cable Connect Female Plug to RGB LED Strip Light with Free 4pcs 4pin Connector

  • Length:3M , 2pcs extension cable with 4pcs 4pin connector free.
  • Extension Connecting Cable for 5050 3528 SMD RGB LED Strip Lights.
  • A perfect solution for connecting led strip with controller or strip to strip connection.
  • 4 pin quality cable wire,bended and notated.
  • No need welding,no need soldering,easy to use.
Check Stock

Arrozon LED Lights Remote Control with Controller, 44 Keys IR Remote Controller Replacement for RGB Led Strip Lights(1 to 2 Controller)

  • [Fit for RGB LED Strip Light]:Suitable for 5050,3528,2835 RGB led strip light 4 pin..
  • [44 Keys Remote Controller]:It has 20 static colors, adjust brightness,control modes: Static/ Flash/ Strobe/ Fade-change/ RGB Smooth-change..
  • [DIY Mode]:According to your preferences to DIY its color..
  • [Controller Output]:Controller Output: DC 12V, 2A/Channel, 2-Port.
  • [1 to 2 Controller]:This led strip Controller can connector 2 roll led strip..
Check Stock

10pcs Black 0.3M 0.98ft 4 Color RGB Extension Cable LED Strip Connector Extension Cable Cord Wire 4 Pin LED Connector for SMD 5050 3528 2835 RGB LED Light Strip 10 PCS

  • Length: black 300mm/0.98ft For - 5050/3528 RGB LED strip lights, RGB LED Extension Cable is designed for 10mm width LED strips..
  • Functions - 1.Connect between IR/RF Controller and 5050/3528 RGB LED strips, to extend your LED strips to the ideal location where you'd like to....
  • Solderless - With 2 pre-soldered female connectors and 2 male 4 pin plugs(copper electroplated), you can directly plug this cable into your 5050/3528....
  • Flexible and durable - The color is pretty. The PVC plastic insulation was durable and flexible. The pure copper wires inside are stranded so it can....
  • Package Includes: 10x 300mm/0.98ft 4pin extension cable for RGB LED strips, 20pcs male to male 4pin plugs..
Check Stock

4PCS 2M 6.56ft 4 Color RGB Extension Cable LED Strip Connector Extension Cable Cord Wire 4 Pin LED Connector for SMD 5050 3528 2835 RGB LED Light Strip

  • Length: 2M For - 5050/3528 RGB LED strip lights. RGB LED Extension Cable is designed for 10mm width LED strips.
  • Functions - 1.Connect between Controller and 5050/3528 RGB LED strips, to extend your LED strips to the ideal location where you'd like to install.
  • 2.Connect between RGB LED strips, making it possible to install your multiple RGB LED strips in your preferred locations. So, you can control your LED strips in another location..
  • Solderless - With 2 pre-soldered female connectors and 2 male 4 pin plugs(copper electroplated), you can directly plug this cable into your 5050/3528 RGB LED strips or controller to get them connected, without soldering..
  • Flexible and durable - The color is pretty. The PVC plastic insulation was durable and flexible. The pure copper wires inside are stranded so it can take a lot of flexing without breaking..
  • Package Includes: 4x 2m 4pin extension cable for RGB LED strips, 8x male to male 4pin plugs..
Check Stock

24V 2.5A Power Supply Adapter 110V-240V AC to DC 24 Volt 60 W Charger Power Cord for Logitech Racing Wheel,LED Strips, LCD Monitor,CCTV Camera

  • 【Parameter】: Input: worldwide 100-240 VAC 50/60Hz, output: 24volt 2.5amp, MaxRated Power: 60 Watts. DC Plug Size: 5.5×2.5mm (center positive)..
  • 【Protection and composition】: 24V 2.5A Power Supply - UL ETL CE FCC RoHS safety certificates approved . 1 Years warranty, Multiple protection.ABS+PC Flame-retarded material case, Pure copper wire core, stable output . Low fever , No noise , Efficient, can continuously power your device like the original charger, protect your device..
  • 【Scope of use】:Logitech Driving Force GT Racing Wheel / Logitech G25 G27 G29,G923 G920 Racing Wheel P/N: 190211-0010 190211-A030 ADP-18L R33030 / G940 APD DA-42H24 PS3 GT Driving Force Gaming Driving ce Steering Wheel Controller..
  • 【Scope of use】:3528 5050 5630 LED Strip light CCTV/5050/3528 Led RGB RGBW RGBWW Magic Dream Color Light Strip..
  • 【What you get】: 1 X 24V 2.5A AC TO DC Power Supply adapter, 1 X Ac cord ,.
  • 1 Year Warranty, Friendly customer service..
Check Stock

BZONE 10 Pack LED Strip Connector 4 Pin with 16.4FT Extension Cable for Non-Waterproof 10mm Wide 5050 RGB LED Strip Lights, Strip to Wire Quick Connection, 22-20 AWG

  • Work for non-waterproof 10mm width 5050/3528 RGB 4 pin led strip light, suit for 22-20 AWG Solid Wire / Strand Wire..
  • Fire-proof Nylon housing and high precision brass connector is durable and powerful, in order to connect and fix strip light, no more worry strip light or wire moving out of connector..
  • Connect strip to wire without stripping insulation, no soldering, quick and flexible connection..
  • DIY led strip to wire connection length you want, no mater strip-to-wire extension or strip-to-strip jumper, free from the limit of terminal position..
  • Compatible with 5V, 12V, 24V led strips, support up to 5A current carrying, permit you to connect longer LED strips by one connector..
Check Stock