Reviews3d Printer Extruders

TL TENLOG TL-D3 V2 Independent Dual-Head 3D Printer WI-Fi Function Silent Motherboard TMC2209 Driver 400W Power Supply Support PVA TPU ABS PLA BMG extruder 11.8 x11.8 x13.8

【INDEPENDENT DUAL EXTRUDERS】:Our TL-D3 V2 dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual....
【32-Bit Motherboard】: The main chip is upgraded from 8-bit to 32-bit, and the printer runs more smoothly The 32-bit motherboard supports wifi and....
【Print recovery】：The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print....
【Upgraded PEI Magnetic Board】: TENLOG upgraded PEI magnetic board, which makes the printed matter fit better and will not warp. Even the first....
[Super cooling module]: The fans of the two nozzles can be controlled independently. The side fans of the nozzles use two blower fans to dissipate....

Check Stock

SainSmart - TPU-WHT-0.25KG1.75 SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (White)

Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm..
Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones..
SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones..
Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only available in 1.75mm diameter..
It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden..

Check Stock

SainSmart - TPU-GRN-0.25KG1.75 SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Green)

Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm..
Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones..
SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones..
Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only available in 1.75mm diameter..
It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden..

Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

...duce filament slipping by firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
Easy to Assemble— Our ender 3 extruder and 1 meter capricorn tubing includes all th....

Check Stock

Official Creality CR-10 Smart Pro 3D Printer, Large 3D Printer with HD Camera and Remote Controll, Auto Leveling, Dual Gear Direct Extruder, Flexible PEI Bed for DIY Home and School, 300×300×400mm

...definition camera and LED energy-saving light, so you can view the printing status and control the printing process to keep a close eye on your printer anytime and anywhere..
[Better performance]: Brass nozzles for temperatures up to 300°C, all-metal dual-gear direct extruders ensure high-quality extrusion and printing accuracy, reduce clogging, and can be applied to a broader range of materials..
[User-riendly Design]: More friendly CR-Touch auto bed-leveling and manual bed-leveling for both professional and beginners. In addition, it comes with a 4.3-inch touch screen that is responsive, colorful and has a wide field of view..
[Smooth Finish]: Compared with a glass bed, the magnetic spring steel sheet is capable of excellent adhesion and smooth surface, avoiding warping. The print comes off easily on a PEI bed with a simple bend..

Check Stock

WEEDO X40V2 3D Printer Independent Dual Extruder Firmware Open Source Auto-Leveling 4.3 Touch Screen Support PVA TPU ABS PLA Nylon 11.8 x11.8 x15.7

【Independent Dual Extruder】WEEDO X40V2 designed with independent dual extruders on the linear rail, with the dual extrusion, duplication and....
【Auto-leveling 3d printer】WEEDO IDEX X40V2 is designed with proximity sensor to improve the overall printing reliability. We have also added....
【User Friendly UI System】WEEDO X40V2 adopts a 4.3-inch full-color touch screen.The user-friendly UI is equipped with a multi-language interface.....
【Build in Camera 】WEEDO X40V2 equipped with ESP32 Wi-Fi chip and a built-in camera module that allows you to check your printer in the local area....
【Help Button & Warranty】The UI includes a context based Help icon, which is convenient for beginners to quickly get guidance on how to use the....

Check Stock

Official Creality Ender 3 S1 Pro 3D Printers with 300℃ High Temperature Hotend All Metal Direct Drive Extruder, CR Touch Auto Leveling Bed, Spring Steel PEI Build Plate, Printing Size 220x220x270mm

...nder-3 S1 Pro 3D Printer Equipped Brand-new self-developed "Sprite" direct dual-gear extruder features two chrome steel gears . The extruder realizes smooth feeding and discharging of filaments without slipping and works extremely well in printing flexible filaments such as TPU. Compared with other direct extruders, the "Sprite" is lighter and features less inertia and more precise positioning..
【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling system can automatically compensate the error height (accuracy ±0.04mm) at different points of the printing bed, which effectively improves the model printing quality and printing success rate, and makes leveling bed more easily more precise..
【Filament Breakage Detecting and Power Off Resume Printing】Ender-3 S1 Pro features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents..

Check Stock

SearQing Creality Upgrade 3D Printer Kit with PTFE Teflon Tubing,Premium Metal Bed Springs, PC4-M10 Pneumatic Fittings and Two Blue Collet Clips

...table for 1.75mm filaments,and rated for higher temperature usage than cheaper PTFE alternatives.The inner diameter tolerance is much stricter than competitors in this field, and it can bring better performance in all Bowden-style printers that use it..
【Upgrade】 Compared with today's ordinary 3D printer plastic extruders, this upgrade helps to ensure that the feed rate is more uniform over time and has higher wear resistance. The full installation kit for the extruder is included and it is very easy and straightforward to switch to this upgraded part on your machine..
【Compatible with printer】 The spring contained in this package is suitable for CR-10 series printers and is 5 mm longer than Ender series springs. But they are compatible with Ender series printers. You may need to raise the z-axis limit switch by 4-6mm to accommodate the longer length. These 6 heavy-duty springs provide much more resistance and will hold the bed level much longer than your stock printer springs.This ensures more consistent results, higher print quality..
【High-quality upgrade parts】 The stainless steel pneumatic fittings are top of the line fittings with metal teeth inside that will grasp the PTFE tubing ensuring that it doesn't slip as the filament is pushed....

Check Stock

SW. ACCESSOIRE 2pcs New Version for E3D-V6 Heating Block Compatible for PT100 Sensor for e3d v6 Heated Blocks 3D Printer Parts

3D Pens Abs Filament Accessories 3D Pen Filament Refills 3D Printer Resin Printer Portable Printer Mini 3D Printer 3D Filament 3D Printer Accessories Power Supply Painting Kit Tool Pouch Spatula Set Essentials.
3D Printers 3D Filament 3D Printer Filament Deburring Tool Tool Bag Knife Kit Impresora 3D 3Dpen For Kids Scribble Pen 1.75 Filament Home Printer Cnc Router Machine Model Kit Aluminum Tape Resin Printer 3D Drawing Pen.
Crafty Touch 3D Printing Pen Paint Kit 3D Pen Impresora 3D 1.75 Filament Magnetic Tool Pad Touch Screen Screen Printer 3D Printer Accessories 3D Pen For Kids 3D Pens Model Kit Drill Kit Electronics For Teens Tool Bag Cnc Machine.
Scribble Pen 3D Pens For Kids And Adults Metal Bed Power Pro Paint Palette 3D Pens For Kids Screen Printer Palette Knife 3D Printer Resin 3D Pen Essential Pen Set 3D Pen For Adults 3Dpen For Kids 3D Printing Pen For Kids.
3D Filament Crafty Touch 3D Printing Pen 3D Printer Accessories Cnc Machine Tool Kit Tool Pouch Tool Set With Drill Tool Set Interesting Gifts 3D Printing Pen With Usb 3D Pen For Kids Scribble Pen 3D Pen For Adults Printer Cable.

Check Stock

Official Creality Ender 3 S1 3D Printer, Upgraded Direct Drive FDM 3D Printers, Quick Assembly, with Auto Leveling Bed, Dual Z-axis Screws, Spring Steel Print Bed, Build Size 220x220x270 mm

...r】Creality Ender-3 S1 3D Printers Use Brand-new self-developed “Sprite” direct dual-gear extruder features two chrome steel gears . The extruder realizes smooth feeding and discharging of filaments without slipping and works extremely well in printing flexible filaments such as TPU. Compared with other direct extruders, the “Sprite” is lighter and features less inertia and more precise positioning..
【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling system can automatically compensate the error height (accuracy ±0.04mm) at different points of the printing bed, which effectively improves the model printing quality and printing success rate, and makes leveling bed more easily more precise..
【Power Loss Recovery and Filament Sensor】Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents..
【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, Ender 3S1 works smoother....

Check Stock

ZONESTAR Z9V5Pro Multi Colors 3D Printer with Four Extruders 4.3 Inch TFT-LCD 32-bit Silent Motherboard Auto Leveling Auto Resume Removable Magnetic Platform Large Build Volume 300 x 300 x 400mm

1. [Multi Colors Printing] Z9V5Pro equipped with 4 extruders and a 4-IN-1-OUT hotend, it can print 3D models with up to 4 colors. Zonestar self-designed 4-IN-1-OUT hot end makes the color switching more efficient and reliable, and gets rid of the common oozing issue of multi nozzle 3d printers. You can paint color on 3d model file in slicing software to assign different extruder on the different area, so it can print multi colors even if you have only a single color 3d model file.
2. [Fast Assembly and Quiet Printing] The printer boasts a modular design that makes it easier to assemble. 32-bit motherboard with silent motor drivers make the machine work noise very low (the noise measured at 1m away from the machine is less than 55dB).
3. [More Function] Filament detection and print resurrection function provide can continue to print from the same place where it has been stopped, regardless of unexpected power failure or the filament have run out. Bed auto-leveling sensor on which can compensate the unevenness of the heated bed automatically, to achieve easy, fast and precise leveling. The models can be eay to remove by bending the flexible magnetic platform gently after printing.
4. [Open Source and Upgradable] Z9V5Pro’s firmware and slicing softw....

Check Stock