Reviews3d Printer For Under 1000

Monoprice Replacement Nozzle Designed for Monoprice Ultimate 2 3D Printer

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or....
  • Safety: always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and....
  • Quality at a fair price: Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service and support: you're never on your own with Monoprice products. We have a full team of friendly and knowledgeable technicians available to....
Check Stock

Brother Genuine CK-1000~2 (1.97”) 50 mm Wide x 6.5 ft. (2 m) Cleaning Roll for Brother VC-500W Label and Photo Printers

  • Designed to keep Print head clean. Brother Genuine CK-1000 cleaning roll for Brother VC-500W label and photo printers is specially designed to ensure that your labels, photos, stickers and more are always printed in the best quality..
  • Protect your hardware investment. Use Brother Genuine supplies for consistent high-quality output. Use of non-Brother, third-party products may result in printer damage and may not be covered under the Brother At Your side product..
  • Automatic cleaning. The CK-1000 cleaning roll is easy to use – simply insert the cleaning roll into the printer and cleaning will automatically start..
  • Cleans entire print head. Brother Genuine CK-1000 ~ 2 (1. 97”) 50 mm wide x 6. 5 ft. (2 m) cleaning roll cleans the entire print head..
  • Compatible with Brother LABEL AND photo PRINTER: Brother Genuine CZ and CK label rolls are compatible with Brother VC- 500W versatile, compact label and photo printers. The VC-500W includes one CK-1000 cleaning roll..
Check Stock

TEN-HIGH MGN15 1000mm Linear Guide Rail Linear Motion Slide Rails Linear Motion Products, for 3D Printer and CNC Machine, 1pcs Rail + 1pcs MGN15C Block Bearing

  • 【BLOCK SIZE】Model: MGN15C (Pre-loaded).
  • Block fixing bolt size: M3x4 (Please refer to Parameters Picture for more detailed information.).
  • 【ADVANTAGES】Made of high-quality passivated Bearing Steel with low friction coefficients, which has no resistance when put the bearings on the rail. Durable, corrosion resistance and smooth, perfectly fits most 3D Printer. And it works beautifully for both slider motion as well as panning..
  • 【APPLICATIONS】Professional and technical rail and block, suitable for most automatic equipment. Widely used for CNC parts, 3D printer, semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robot arms, precision measurement machine and other small linear motion device, etc..
  • PACKAGE INCLUDES: 1pcs MGN15 1000mm Rail, 1pcs MGN15C Block.
Check Stock

Tattoos

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

The Cheap Detective

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

Introduction to Play Analysis

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

3D Printer Glue Sticks, FENGWANGLI 4 Pieces Solid Adhesive for Hot Bed Print Filament PLA Glass ABS PETG CPE

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Blue

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Natural

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, Blue

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, White

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock