Reviews3d Printing Filament Nylon 2

YXPOLYER Lightweight high Strength PA6 Carbon（Chopped Carbon Fiber），1.75mm 3D Printer Filament,Nylon6 Engineering 3D Printing Materials,tensile Strength Increased 50%，250g Spool,Black

  • ...sile strength（Tensile strength: 58MPa） and rigidity（Flexural modulus: 3593MPa ）； Excellent chemical and thermal resistance；Strong layer bonding；Suitable for the automotive industry, sporting goods, aerospace and other fields, such as oil-free bearings, sports equipment and flight equipment, etc..
  • ★【Printing conditions】We recommend print the Nylon-CF15 filament at a Printing temperature of 220℃-280℃, bed temperature of 80-100°C..
  • ★【1.75mm engineering Filament Diameter】Dimensional Accuracy +/- 0.04mm. YXPOLYER filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ★【Vacuum packaging】 Complete drying for 24 hours before vacuum packaging, which can effectively protect the filament from moisture. Note points for printing and storage of engineering materials, such as drying before use, it is best to use a closed printer and the recommendation of the bottom plate temperature, and the wire after opening is sealed in time or stored in a dry box, etc..
Check Stock

taulman3D Nylon Filament Alloy 910 1.75mm 3D Printer Consumable Polyamide PA 1kg Spool 2.2lbs Fits Nearly All FDM 3D Printers Black

  • Industrial Strength Nylon Filament for Desktop 3D Printing. Alloy 910 is Trusted By the World's Leading Aerospace and Automotive Companies for High....
  • Made in America. Every Single Spool is Manufactured in the United States, Ensuring Consistency and Quality is Maintained Throughout the Entire Supply....
  • 1kg Spool. Instead of Using Smaller 1lb Spools, Use This 1kg Spool of Nylon Filament to Ensure You Can Make Larger 3D Prints Without Having to Change....
  • Recommended Printing Temperatures: 250-255C - This Allows Nearly All 3D Printers on the Market Today to Use Alloy 910 Because it Extrudes at Lower....
  • Nylon Filament. Higher Strength, Higher Performance Properties Than PLA, ABS or PETG Filaments. Professional Designers and Engineers Trust Alloy 910....
Check Stock

NovaMaker PETG 3D Printer Filament 1.75 - Black 1.75mm PETG Filament, PETG 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.03mm.

  • ✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
  • ✅【Best Quality PETG Filament】Made by USA virgin PETG material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.02 mm..
  • ✅【Tangle-Free Tips】Black PETG Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
  • ✅【Printing Tips】Recommended Prting Temperature 230°C - 250°C, Bed 70°C - 80°C. PETG Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
  • ✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..
Check Stock

NovaMaker PETG 3D Printer Filament 1.75, Clear PETG Filament 1.75mm, Transparent PETG 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm

  • ✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
  • ✅【Best Quality PETG Filament】Made by USA virgin PETG material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.02 mm..
  • ✅【Tangle-Free Tips】Clear PETG Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
  • ✅【Printing Tips】Recommended Prting Temperature 230°C - 250°C, Bed 70°C - 80°C. PETG Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
  • ✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..
Check Stock

ANYCUBIC Mega X FDM 3D Printer and ANYCUBIC PLA 3D Printer Filament(Grey + Black) Bundle

  • ① ANYCUBIC MEGA X 3D Printer, Large Metal FDM 3D Printer with Patented Heatbed and 1kg PLA Filament, Build Size 11.81in(L) X 11.81in(W) X 12in(H).
  • ② ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey.
  • ③ ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Black.
Check Stock

ANYCUBIC Kobra Plus 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Matte Yellow) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Matte Yellow Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
  • Filament Run out Detection & Power off Resume: Equipped with filament & power detection sensor, Anycubic Kobra Plus can pause the printing process intelligently if you encounter the situation of running out of filament or unexpected power failure. It can resume printing from the last printing position, which can save your time and reduce wasting..
  • Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
Check Stock

ANYCUBIC Kobra Plus 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Red) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Red.
  • Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
  • Filament Run out Detection & Power off Resume: Equipped with filament & power detection sensor, Anycubic Kobra Plus can pause the printing process intelligently if you encounter the situation of running out of filament or unexpected power failure. It can resume printing from the last printing position, which can save your time and reduce wasting..
  • Large Build Volume & Fine Printing: The printing build volume of Anycubic Kobra Plus is 2.5 times larger than Anycubic Mega S. 300*300*350mm printing size to satisfy all your 3D printing needs. Equipped with Double thread Z-axis moving construction. Anycubic Kobra Plus can minimize the shaking, ensurig more model details can be restored. It is also the cornerstone to ensure high printing speed..
  • Component Upgrades to Achieve Creative Freedom: Equipped with an all-metal geared extruder, which heats up and melts the filaments quickly, ensu....
Check Stock

JAYO PLA+ 3D Printer Filament Bundle, PLA Pro Filament 1.75mm, Neatly Wound Filament 2.5kg, 250g Spool, 10 Pack, Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent

  • ...olor 250g PLA+ Filament, individually vacuum packed, 2.5KG in total..
  • 【JAYO PLA+ 3D Filament 1.75mm】PLA PLUS filament is 10 times stronger than normal PLA Filament. PLA+ filament's better toughness, higher strength, lower warping and brighter color can make the 3D printing result better..
  • 【Neatly Wound Filament】Adopting 100% neatly line up filament skill, produced with full mechanical winding and strict manual examination. Making sure JAYO PLA+ filament neat and easy to be fed. Say goodbye to the tangling problem and unstable printing process..
  • 【1.75mm Filament Diameter】JAYO PLA Plus 3D printer filament has 1.75 mm diameter, dimensional accuracy +/- 0.02 mm, accurate diameter making it suitable for almost FDM 3D printers..
  • 【PLA+ Recommend Settings】We recommend printing the PLA+ filament at a nozzle temperature of 210-235°C, bed temperature of 55-65°C, printing speed of 50-100mm/s..
Check Stock

FLASHFORGE Creator Pro 2 3D Printer Independent Dual Extruder, Dual Color Printing, Open 3D Slicer Support with 2 Spools Filament, Work with PLA, ABS, PVA, PETG Filament, Build Volume 200*148*150mm

  • ✨INDEPENDENT DUAL EXTRUDERS - Dual extruder 3D printer Creator Pro 2 realizes Double productivity & Dual filament printing. 4 print modes, Mirror, Duplicate, Dual Filament and Dual-color modes. 2 nozzles work simultaneously and independently to achieve double productivity..
  • ✨HEATING BED - Rapid steady heating prevent model warping much easier to take down models. It supports various types of filament ABS, PLA, PVA, HIPS, creating more realistic models!.
  • ✨REMOVABLE COVER - Creator Pro 2 dual extruder 3d printer lets you adjust chamber temperature at ease. Simply remove its cover when printing PLA filament, as high environment temperature may cause nozzle clog. When print ABS filament, please close the chamber for better quality..
  • ✨RESIDUE SCRAPING DESIGN - After printing, the print head moves to the residue scraping board edge to scrape any residual material on the nozzle. This design of dual extruder 3D printer Creator Pro 2 helps avoid misalignments in the colors, get cleaner dual prints..
  • ✨WIDE RANGE OF APPLICATIONS - Perfect for small workshop's production dem....
Check Stock

3D Solutech Real Grey 1.75mm Flexible 3D Printer Filament 2.2 LBS (1.0KG)

  • PRODUCES THE BEST 3D PRINTS: This 3D printing filament offers excellent dimensional accuracy with no more than 30 microns of diameter variance. This allows for better and more consistent feeding as well as higher quality 3D prints. You can get professional results right from your own 3D printing machines..
  • HIGHLY COMPATIBLE: We at 3D Solutech are proud to provide you with flexible PLA filament that is compatible with almost all 3D printers, including those from RepRap, MakerBot (such as the Replicator and Replicator 2), Ultimaker, Bits from Bytes, Airwolf 3D, MakerGear, Printrbot, Bukobot, Type A Machines, and many more..
  • MEETS ALL 3D PRINTING NEEDS: At 3D Solutech, our durable printing filament is highly versatile and can meet all of your 3D printing needs and applications. It comes in a variety of 3 different colors, including white, silver, hot pink, navy blue, and more. No wonder it’s the first choice of engineers and designers!.
  • ENVIRONMENTALLY FRIENDLY: Did you know that our PLA filament is stronger than alternative PLA filaments? It consists of polylactic acid and algae harvested from areas where it harms the environment in excess amounts. Additionally, it requires less energy to print because it requires a low printing temperature..
Check Stock

IC3D Natural 3mm Nylon 3D Printer Filament - 1 kg Spool - Professional Grade 3D Printing Filament - Made in USA

  • 2.1 lb of 3mm Nylon 3D printer filament | Similar to Taulman Bridge Nylon.
  • Filament diameter is 2.85mm +/-0.05mm, ovality (roundness) is within 4% and weight is 2.1lb +/- 0.1.
  • Printing Temperature range is 245 - 260C | Bed Temperature 40C - 70C.
  • Made in the USA under strict quality standards.
  • Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A.
Check Stock