Reviews3g Power Amplifier

ZDTECH High Gain 10-12dBi Omni Directional Outdoor Pole/Wall Mount Antenna With SMA Male/Dual TS9 3G/4G/LTE/5G for Verizon, AT&T, Sprint Mobile Hotpots Router MiFi Mobile Hotspot Router (698-4000 MHz)

  • [Antenna Gain]Frequency Range: 698 - 4000MHz.
  • Highly enhance your 3G/4G/LTE/5G signal range, improve your mobile broadband reception..
  • [Antenna Connector & Cable]Cable Length: 5 meter.
  • Adapter Cable: SMA Female to Dual TS9 with 16.5cm RG316 Cable..
  • [Wide Compatible] The antenna with SMA Male Original Connector Compatible with 3G/4G/LTE/5G Mobile Router, Mobile Broadband Modem Hotspot, Cellular Gateway,CPE Router.
  • Home Office Indoor Cell Phone Signal Booster Repeater, Vehicle Car Truck RV Bus Van Mobile Cellular Amplifier.Also Compatible with(when use Adapter Cable) 3G/4G/LTE/5G Mobile Hotspot, MiFi Router, Cellular Mobile Broadband Modem, Wireless CPE Router, USB Modem Dongle Adapter..
  • [Install Note] Please turn off the power of your device;Please keep antenna as vertical as possible;Please install the antenna as high as possible to get a better signal..
  • [Help]If you are not sure whether it applies to your device, please contact us for help.You can also ask us questions in Customer questions & answers..
Check Stock

ANTOP Smartpass Amplifier TV Signal Booster for Any Non-Amplified TV Antenna, High Gain & Low Noise & Built-in 4G LTE Filter,Amplify VHF and UHF Signals, Included USB Power Adapter and 5ft USB Cable

  • 【Delivers the correct range for YOU】ANTOP exclusive technology- SMARTPASS amplifier allows easier adjust the balance between short and long range reception. Switched on to boost weak signal reception and switched off to avoid overload signal reception. You don’t have to hesitate any more on deciding between a short range and long range antenna!.
  • 【Amplified clear circuit technology】 deliver more range and crystal clear picture, reduce signal dropout and pixilation. The amplifier/ booster can enhance the signals weakened by the obstructions between you and the towers. But can not add signals. Works with any non-amplified/passive TV antenna and cannot work with antennas which already are amplified..
  • 【Shields against INERFERENCE】Build in 4G LTE Filter, blocks 3G and 4G wireless signals for clear smooth pictures and stable Channel reception. Bringing you a no-noise and no-flash TV viewing experience and into a real family paradise..
  • 【EASY INSTALLATION IN ONE MINUTES】3ft and 0. 3ft extension coaxial cables are attached at either end for easy connection. Smart pass amplifier must be powered to function. Unit can be powered via the included USB cable by connecting to any USB power adapter supporting 5V output on USB-port..
Check Stock

CeKay Outdoor Digital HD TV Antenna with High Gain and Low Noise Amplifier for UHF/VHF - Long Range, 40FT RG6 Coaxial Cable, 2 Way Splitter, Easy Installation - Upgraded Version

  • 【Easy to Installation】 Just connect the amplifier to the antenna and TV or STB box, then plug into the USB port for getting power, HD digital TV antenna amplifier works with any non-amplified indoor tv antennas. The number of channels reception will vary depending on your surroundings and how far away you are from broadcast towers..
  • 【Signal Booster】 The Digital TV Antenna Amplifier has build-in 4G LTE Filter, blocks 3G and 4G wireless signals, it will enhance and strengthen the signal received by your indoor non-amplified passive TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers..
  • 【High Performance With Low Noise】 This Amplifier has very good performance to strengthen the signal received by digital tv antenna. It improves signal-to-noise ratio and compensates for cable loss to offer a superior viewing experience. Improves VHF and UHF reception and boosts signals for digital hdtv with very low noise!.
  • 【Warmly Reminder】If your house is very close to the broadcast tower and the signal is already very strong, we do NOT recommend using this amplifier/booster, if your stations are far away t....
Check Stock

Karaoke USA DVD/CD+G/MP3+G System with 7\ TFT Digital Color Screen,Record Function, Bluetooth and HDMI Karaoke Player (GF946)

  • 7" TFT Digital Color Screen with HDMI Output and Remote Control.
  • 35W Peak Digital Power Amplifier (25W RMS ) Bluetooth Capable.
  • LED Lights that Synchronize and Flash with the Rhythm of Music.
  • 2 Microphones Included With 300 MP3G Songs.
Check Stock

Rechargeable Hearing Amplifiers Aids for Seniors Upgrade Mini Invisible Personal Sound Amplifier with Noise Cancelling Magnetic Contact Portable Charging Box 1 Pair

  • IN EAR DETECTION WITHOUT SQUEAL: This hearing amplifiers use fully-new ear detection technology. It will power on with detection of placing in your....
  • LIGHTWEIGHT AND COMFORTABLE: Weight about 3g, compact and portable, ergonomic design, not easy to fall off. 3 shape earplugs are provided, which can....
  • A BIG BUTTON OPERATION: Up to 190° turn on adjustment knob to adjust the volume, easy operation. Meet different environments (Quiet/ Noisy/Outdoor).
  • RECHARGEABLE AND TEMPERATURE PROTECTION: 12 Hours working for hearing amplifier. 2 Hours charging with portable case. Low power warning. With the....
  • 100% SATISFIED SERVICE: Each hearing aid comes with best after-sales service, it means if you have any issues about this product you could contact us....
Check Stock

Car Radio Stereo GPS for Mercedes Benz GL ML Class W164 X164 ML350 ML450 GL320 GL450 Car Multimedia Player CarPlay TPMS OBD WiFi DAB (7 inch, Octa Core 4GB RAM 64GB ROM)

  • ...e Models: For Mercedes-Benz Classe ML-Class W164(ML300/ML320/ML350/ML450/ML500/ML63 AMG) (2005-2012), GL-Class X164(GL320/GL350/GL420/GL450/GL500) (2005-2012)..
  • Powered by the latest Android 11.0 operating system: Car Standard Radio Module: TDA6686 Strong anti-interference ability, good radio signal receiving. Power Amplifier Chip: TDA7851 High-fidelity and powerful audio effects. CPU Processor: 1.5GHz * 8 Core 64-bit Octa-core processor 64GB ROM + 4GB RAM DDR3 memory high capacity offer you the best and smoothest experience..
  • Redesigned Back End: With the newly designed heat sink and connectors, we have maximize the connection capabilities of the Android unit, whilst keeping the wires simple and tidy for installation.Specially designed thickened aluminum heat sink for efficient heat dissipation..
  • Features: Wireless CarPlay/Android Auto, Bluetooth call/music, Voice Guidance, GPS, online map/offline map for navigation, wifi/4G/3G, multi-touch screen, built-in USB port, RDS, DVD player, built-in microphone, high definition display, multi-languages choice, steering wheel control, screen mirroring, reversing camera, DVR, OBD, TPMS, DAB..
  • Note: If your vehicle has the factory navigation or amplifier system(for JBL, for BOSE, for Harman Kardon, etc.) installed....
Check Stock

Seismic Audio Speakers Epicenter 5004 4 Channel Power Amplifier, 2000 Watts RMS Amplifier

  • Power Amplifier: Our Epicenter Amplifier is a beast! This is a 4 channel amplifier capable of pushing just about anything..
  • Audio Amplifier: This is a high end amplifier that is rack mountable. This power amplifier is easily capable of pushing eight 18" subwoofer cabinets or two pairs of dual 15" speakers..
  • 2000 Watts RMS Amp: This audio amplifier can handle 4 x 500 Watts RMS at 8 Ohms, 4 x 850 Watts RMS at 4 Ohms, 2 x 1600 Watts RMS at 8 Ohm Bridge of power..
  • 4 Channel Amplifier: The front of the Seismic Audio Speakers’ amplifier has channel A, B, C, and D volume controls, power indicator, clip indicator, protection mode indicator, and signal indicator..
  • Size And Weight Details: This 2000 Watts RMS amp fits standard 19” rack cases and weighs 69 lbs..
Check Stock

UWAYKEY 35W Audio Tube Amplifier with TDA7377 Chip, HiFi Stereo Receiver Integrated Amp with Bluetooth 5.0, Hybrid Amp for Home Theater System

  • About ZK-152H Tube amplifier: ZK-152H is a hybrid tube power amplifier, which uses tube as the front stage power amplifier and class AB power amplifier chip as the combination method of the rear stage. This combination method neutralizes the advantages and disadvantages of Class A power amplifiers and Class AB power amplifiers. ZK-152H Tube amplifier allows you to taste the "taste" of tube amplifiers at a low price instead of the cold "digital taste" of digital power amplifiers..
  • This tube power amplifier uses the TDA7377 chip, which is a class AB power amplifier chip. The professional fully complementary output stage structure and internal fixed gain ensure that the output is not distorted at high power. We changed the output power of the chip to 35w by means of bridge connection. This output power is not a beautiful figure in the face of digital power amplifiers, but its sound quality is far better than digital power amplifiers, especially when playing human voices..
  • How Many Input Methods Are There: ZK-152H tube amplifier provides two input modes: Bluetooth mode and RCA mode, the switching between modes can be switched by physical buttons. At the same time, the tube amplifier can also input audio signals through AUX 3.5mm..
Check Stock

DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board 50W+50W+100W (Bluetooth Amp),Bluetooth Amp

  • tpa3116 amplifier 100W Subwoofer Amplifier Board.
  • Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz.
  • tpa3116 2x50w amplifier board Operating voltage range: DC 12-24V(maximum voltage is no more than 24V).
  • This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board..
  • bluetooth amplifer board DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output.
  • Speaker impedance: bass speaker impedance: 2-8 ohm.
  • You can use a good switching power supply adapter, laptop switching power supply, Here is our 24V power diy amplifier.
Check Stock

Isolation Amplifiers 4.5 - 5.5 SV 8 dB (10 pieces)

  • 【QUALITY GUARANTEE】The Digital Audio Amplifier Power Module is made by a professional manufacturer and has undergone multiple tests. It has a very good quality guarantee and a 100% brand new high-quality brand..
  • 【HAVE A DIGITAL CHIP】The Digital Audio Amplifier Power Module is equipped with PAM8403 digital chip, which is a small digital amplifier chip, which can highlight the advantages of digital chip and bring you a good experience..
  • 【POWERFUL FUNCTIONS】The circuit of the Digital Audio Amplifier Power Module adopts reasonable configuration, the power filter is upgraded to 470 uf, and with 1.6 mm glass fiber board, it has excellent performance and powerful functions..
  • 【HI-FI SOUND QUALITY】The Digital Audio Amplifier Power Module outputs 3 w + 3 w high-fidelity sound quality, which can restore the most realistic scenes and bring you a good experience. It is a rare good choice for you.
  • 【THE ANTI-METER BODY】The Digital Audio Amplifier Power Module adopts the original anti-meter body, and the potentiometer with counterclockwise switch can directly cut off the power supply. It is safe and you can buy it with confidence..
Check Stock

Precision Power E.7 1/2 DIN 7-Band Parametric Equalizer with LED Display

  • QUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others..
  • 1 Ohm Stable - This SPL Audio Subwoofer Amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively..
  • Features – The monoblock bass boost amplifier has features like - Frequency Response: 15~150HZ, Bass Boost, SNR: >105DB, Remote Bass Knob, 2-way protection, Input Sensitivity: 200mV to 6V and THD:.
  • Power – This Class D 3000 Watt Amplifier has a power rating distribution as followed 1500 X 1 @ 1 OHM, 1000 X 1 @ 2 OHMS, 700 X 1 @ 4 OHMS. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Crossovers- The SPL Monoblock Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The monoblock car amplifier provides you with options of variable 50-400hz 12db low pass crossover, variable 17-50hz 12db subsonic crossover, ....
Check Stock