Reviews3hp Electric Motor

Grizzly Industrial G0855-8\ x 72\ Jointer with Built-in Mobile Base

Drill, Press - Wood Drill Press: Bore One Hole, Fast Speed, Construction Drills - Electric

• Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
• Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
• Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
• 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
• Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.

Little Giant 6-CIM-R 115-Volt, 1/3 HP, 2750 GPH Manual Submersible Sump/Utility Pump with 10-Ft. Cord, Blue, 506271

• BUILT TO LAST: continuous duty motor with thermal overload protection, epoxy-coated cast iron housing, upper and lower bearings, corrosion resistant steel motor shaft, and non-clog impeller help ensure a long pump life.
• CONTINUOUS DUTY MOTOR: shaded pole 1/3HP motor with thermal overload protection.
• MULTIPLE FITTINGS: 1-1/2-inch FNPT discharge.
• 1-1/4-Inch FNPT adapter and 3/4-inch garden hose adapter included.
• MANUAL PUMP: ideal for sump pump systems with a separate switch, emergency water removal applications or water transfer applications.
• 1-1/2-inch FNPT discharge with adapters included.

Car Dryer Blower Powerful Car Detailing Car Wash Dryer with 26 Ft Flexible Hose & Wheels Adjustable Air Speed & Tempreture Ultra High Wind Speed and Flow Air Blower

• 【Dry Your Car Quickly and Well】Most swirl marks and scratches happen when you towel dry your car's paint, use filtered warm, dry air to dry your car, never worry about towels scratching your car's paint again ..
• 【3HP Powerful Motor】High-power 3HP (2200W) motor, can provide 63000FPM, 635CFM, Fineera air car blower dryer inhales and filters 63000 feet of clean, warm, dry air per minute. The machine adopts noise reduction technology, so you can complete the drying operation quietly.
• 【26FT Retractable Expansion Hose】With a hose that can be extended to 26FT, it saves space compared to traditional air dryers. Combined with wide fan and pointed nozzles, it can dry into those crevices that are hard to reach by hands. We also thoughtfully present a piece of hose protection cover to prevent your hands from burning when using higher temperature hot air..
• 【Adjustable Wind Speed & Temperature】In order to meet different usage needs, we have designed two adjustment knobs, which can adjust the wind speed and temperature according to your needs, and the maximum temperature can reach 40℃..

Water Pump Impeller 369-65021-1 47-16154-3 18-3098 for Mercury Sierra Tohatsu 2HP 2.5HP 3.5HP 4HP 5HP 6HP

• Water motor impeller have 6 blades.Height:14.30mm,External Impeller Overall Diameter:33.58mm,Internal Shaft Insert Diameter:10.25mm..
• This aftermarket impeller replaces Mercury outboard motor part #47-16154-3,Tohatsu outboard motor part 369-65021-1, impeller 18-3098..
• Water pump impeller are 100% brand new and don't used or rebuilt..
• Similar in design to stock OEM units and require only simple hand tools for installation.Direct replacement,OE level quality and durability..
• Water pump impeller 100% compatible with OE parts and passed TS16949 certified.Fits for Mercury/Mariner (4-STROKE) Carb 2HP 2.5HP 3HP,Mercury/Mariner (2-STROKE) 4HP 5HP,6HP..

Oarlike Electric Concrete Mixer 3 Cu Ft Portable Cement Mixing Machine for Stucco, Mortar Seeds with Wheel and Stand

• Powerful Concrete Mixers: The Wheelbarrow Mixer is equipped with a 250W copper motor (Horsepower : 1/3HP) The mixer work at a speed of 2800 RPM.With 3 Cu Ft drum capacity,the mixer can finish the mixing work efficiently and quickly.
• Multi Applications Mixer:This heavy-duty cement mixer not only fit for concrete, stucco, and mortar and but also perfect for inoculating seeds and mixing feeds. Owing to its small size.the concrete mixer is convenient for your to finish small work projects..
• High-quality Material:Made of heavy-duty steel with a durable powder-coat finish, the electric concrete mixer features rust and corrosion-resistant, durable for long term service. Don`t need to worry about bent out of shape after working..
• User Friendly Design:Design with safety lock The tilt angle of the mixer can be adjusted according to the user’s preference easily and safely.2Pcs of 9"x1.75" wheels featuring portable, stable load-bearing and shockproof.360° full-scale mixing,mixed evenly,without dead angle..
• Easy to Operate:Comes with all hardware parts and step-by-step manual, the cement mixing machine is easy assembly. We provide 24 hours of customer service for any after-sales or product problems..

A1458R,1/6-1/3HP Condenser Fan Motor 1075RPM

• Multi-HP, 1/6-1/3HP multi-HP Condenser Fan Motor, 1075RPM, 2.8AMP.
• Capacitor (required but not included): 7.5MFD/370V.
• Broad-Ocean multi-HP condenser fan motors are ideal for truck stock. Three 1075 RPM motors & two 825RPM models cover applications from 1/8 to 1/2HP.
• This motor is the same as one of our other listings, A1458 (search “B07VF89GZK on Amazon).
• Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands.
• If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors.

WEN 4214 12-Inch Variable Speed Drill Press,Orange & Forney 20857 Tap Magic Industrial Pro Cutting Fluid, 4 oz

• Product 1: Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
• Product 1: Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
• Product 1: Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
• Product 1: 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
• Product 2: Use for tapping, threading, drilling and reaming.
• Product 2: Use on ferrous metals and non-ferrous alloys.
• Product 2: Apply directly on the work surface.

Cutting-Edge Band Saw Tips & Tricks How to Get the Most Out of Your Band Saw Popular Woodworking

• Solid Steel Design- The 10-305 is a scaled down version of the popular 10-345 and 10-325. Frame is made of steel plate, stronger than plastic frames....
• Cast Iron Table-Large 13-3/4-Inch by 12-1/2-Inch sturdy work surface, a feature not typically found on a bandsaw of this size.
• Rip Fence- A quality rip fence is now included. Easily removed to do free hand work.
• Motor - 1/3HP motor provides ample power for cutting bowl and pen blanks.
• Micro Adjustable Guide Post- Raise and lower the guide post height with the turn of a handle.

WEN 4214 12-Inch Variable Speed Drill Press,Orange & 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base

• Product 1: Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
• Product 1: Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
• Product 1: Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
• Product 1: 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
• Product 2: Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc.
• Product 2: Belt tilts anywhere from 0 to 90 degrees.
• Product 2: Sturdy cast iron base prevents any heavy vibrations.
• Product 2: 4.3 Amp motor provides up to 3600 RPM.

Machine Light,Led Work Light, 30W Folding Aluminum Alloy ong Arm Lamp for Lathe Milling Drill Press Industrial Lighting Reading,Cool and warm light available

• Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
• Spindle Travel of 3-1/8″ with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
• Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
• 9-1/2 x 9-1/2″ cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2″.
• Includes drill press, mechanical variable speed, laser, table roller extension, 5/8″ keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.