Reviews3pc Forged Ball Valves

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit

  • ...and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank colla....
Check Stock

6 Pieces Air Conditioning Refrigerant Angled Compact Ball Valve 1/4 Inch for R410A R134A R12 R22 AC HVAC and R12 R22 to R134A Adapters 6015 R134A Refrigerant Tank Adapter 6014 Vacuum Pump Adapter

  • Package includes: you will receive 3 pieces R12 R22 to R134A vacuum pump adapters refrigerant tank adapters, and 3 pieces air conditioning refrigerant angled compact ball valves, easy to match and convenient for your replacement.
  • Angled ball valves: in the package are 45 degree angle manual shut-off valves with 1/4 inch SAE male and female fitting.
  • For quick finger-tightening, the couplers nuts are deeply knurled designed for fast operation, the burst pressure ranges from the maximum 800 psi (55 bar) to the minimum 4000 psi (276 bar).
  • Vacuum pump adapters: these adapters are necessary for vacuum pumps, can adapt R12, R22 systems and R134a systems, are nice adapters for charging and service tools.
  • Easy to install: you can just tighten the adapter and get a good seal easily with hand, the adapters feature quick and easy connection and disconnection with high flow.
  • The ball valve can applied to hoses for charging and recovery, suitable for refrigerants R134a, R410A, R22 and R12 charging hoses or manifold, useful tools for HVAC, AC, car air condition maintenance.
  • Confident to use: made of copper, all angled ball valves and adapters in the package are durable for long-term service, provide simple and easy operation and installation, strong sealing for du....
Check Stock

MYCAN Trailer Hitch Ball Mount Forged Solid Steel Fits 2 1/2' Receiver Hitch Class 5 Hitch Ball Mount Towing 2' Drop, 1/2' Rise 20,000 lbs 1-1/4' Hole Commercial Duty MCFT252

  • Heavy Duty Forged Steel: MYCAN trailer hitch ball mount is constructed from high-strength solid forged steel and this hitch ball mount is rated to tow up to 20,000 pounds gross trailer weight and 2,700 pounds tongue weight (limited to lowest-rated towing component).
  • 2 Inch Drop and 1/2 Inch Rise: MYCAN Towing ball mounts comes with a 2-1/2-inch x 2-1/2-inch shank to fit virtually any industry-standard 2-1/2-inch trailer hitch receiver. The tow ball mount also has a 4-inch drop and 2-1/2-inch rise to promote level towing.
  • 2 1/2 Receiver Hitch: Hitching up your trailer is easy with this 2 1/2 inch ball mount. MYCAN forged trailer hitch ball mount features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank.
  • Corrosion-Resistant: For long-lasting use, this trailer hitch ball mount 2 1/2 inch is with highly durable carbide black powder coat finish, solid trailer hitch ball mount easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • Easy to Install: To install this class 5 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2 1/2 inch trialer hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin.
Check Stock

PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention

  • 【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
  • 【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
  • 【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
  • 【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
  • 【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..
Check Stock

ROYHOO 4PCS 1/2 Inch Float Ball Valve Plastic Water Float Valve Mini Plastic Float Valve with Adjustable Arm for Automatic Water Level Control of Water Tank

  • Easy to use: you can have a automatic water level control by adjusting the angle which is formed by the float and the valve body, if the surface of water contacts the float, the water inlet switch will be automatically closed..
  • Quantity and measurement: we provide you with a total of 4 pieces 1/ 2 inch float ball valves, the valve total length is approx. 7.87 inch and a float length is about 3.74 inch, you can install different numbers of the water valves according to the size of the tank or pool..
  • Suitable condition: the float ball valve can be adapted to water temperature which ranges from 0 to 70 degrees Celsius, 0.01-0.8MPA water pressure is applicable, featuring with good control of the water inlet, will give a nice using experience to you..
  • Multifunction: our plastic water filter float ball valves are suitable for a variety of occasions, such as small swimming pools and storage tanks at home, more numbers of water valves should be available for you to install if water inlet is large, effectively solve the problem of taking water in a short time..
Check Stock

Wilkins 115-975XL2 1.5-Inch Lead Free Reduced Pressure Backflow Preventer

  • Reduced pressure principle backflow preventer consisting of a pressure differential relief valve located between twoindependently operated spring-loaded center guided check valves, “Y” pattern body.
  • Complete with two full port resilient seated ball valves for shut-off and four resilient seated ball valve test cocks.
  • Pre-plumbed backflow station. Assembly can be of the reduced pressure principle or of the double check type.
Check Stock

Iron Cross (COBRA Securities Book 20)

  • Forged Construction-A new 5-step forged body is crafted to deliver the softest feel while a hollow cavity provides added distance and forgiveness.
  • Pwrshell Face Design-A forged face cup design increases ball speed across a wider area on the face.
  • Hollow Body with Foam Insert-The Hollow body is injected with a flexible foam that promotes an elastic rebound effect for powerful ball speed.
  • Tungsten Weighting-A heavy tungsten toe weight perfectly positions the CG behind the hitting zone for pure feel with added forgiveness.
  • CNC Milled Face and Grooves-CNC Milling produces more accurate groove shapes to optimize spin and control for improved stopping power into the green.
Check Stock

Callaway Epic Forged Iron (Left Hand, Sand Wedge , 56 Degrees, Graphite - SteelFiber, Regular Flex)

  • Epic Forged Irons are an ultra-premium, stunningly beautiful iron, developed from precision engineering and meticulous craftsmanship for incredible forged performance..
  • For the first time ever in a forged iron, we've implemented our Suspended Tungsten Core. We've suspended the tungsten weight using our Urethane Microspheres for controlled launch and distance..
  • Our renowned 360 Face Cup employs a shallow, flexible rim around the perimeter of the face that flexes and releases at impact to promote fast ball speed..
  • To provide spin and control in the mid and long irons, we've applied a new VFT pattern which promotes consistent ball speed and spin rates..
  • To complete the performance package, Epic Forged is available in stock Aerotech Steelfiber FC and Mitsubishi Tensei AV Silver Shaft options, and Golf Pride Tour Velvet Grips..
Check Stock

Cobra Golf 2022 King Forged Tec One Length Iron Set (Men's, Right Hand, KBS $ Taper Lite 105-120, Stiff Flex, 5-GW)

  • Forged Construction-A new 5-step forged body is crafted to deliver the softest feel while a hollow cavity provides added distance and forgiveness.
  • Pwrshell Face Design-A forged face cup design increases ball speed across a wider area on the face.
  • Hollow Body with Foam Insert-The Hollow body is injected with a flexible foam that promotes an elastic rebound effect for powerful ball speed.
  • Tungsten Weighting-A heavy tungsten toe weight perfectly positions the CG behind the hitting zone for pure feel with added forgiveness.
  • One Length Reduces as many variables as possible by promoting one consistent setup, ball position and swing through the set.
  • The result is more accuracy, more consistency and improved distance.
Check Stock

Cobra Golf 2022 King Forged Tec One Length Iron Set (Men's, Right Hand, KBS $ Taper Lite 105-120, Reg Flex, 5-GW)

  • Forged Construction-A new 5-step forged body is crafted to deliver the softest feel while a hollow cavity provides added distance and forgiveness.
  • Pwrshell Face Design-A forged face cup design increases ball speed across a wider area on the face.
  • Hollow Body with Foam Insert-The Hollow body is injected with a flexible foam that promotes an elastic rebound effect for powerful ball speed.
  • Tungsten Weighting-A heavy tungsten toe weight perfectly positions the CG behind the hitting zone for pure feel with added forgiveness.
  • One Length Reduces as many variables as possible by promoting one consistent setup, ball position and swing through the set.
  • The result is more accuracy, more consistency and improved distance.
Check Stock

Mini Cookie Cutter Shapes Set - 30 Tiny Stainless Steel Stamps of Flower Heart Star Geometric Shapes - for Out Pastry Dough Pie Crust & Fruit Fondant

  • 30 Pieces Mini Cookie Cutter Set,Easy to Use and Clean.Made of stainless steel..
  • Materials: All made of Food Grade stainless steel and 0.3 mm thickness, So our cookie cutters won't be easy to bend or break as other thin cutters,no rust. and can be used repeatedly..
  • Shapes Cookie Cutters Set includes 3 sizes of 10 different shapes,such as 3pc star shape,3pc flower shape,3pc circle shape,3pc heart shape, 3pc square shape, 3pc rectangle shape, 3pc triangle shape, 3pc oval shape..
  • To prevent rust and maximize the life of your cookie cutters we recommend hand washing and wiping dry after each use.
  • SIZE: Various shape mini cutter sizes range from 0.6-1.6 inch/ 1.5 -4 cm, height: 0.79 inch/ 2 cm..
Check Stock