Reviews3pc Socket welding Ball Valve

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection 4-Pack

Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
Single stage Patriot series regulators with protective rubber gauge boots.
Front valve welding handle with stainless steel ball point valves for accurate gas control.
Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.

Check Stock

EZ-FLO 95082 Tri-Check Pvc Check Valve

Price For: Each Flow: Full Flow Compliance: - Mounting Position: Vertical or Horizontal Item: Check Valve with Ball Valve and Union Material of Construction: PVC Size: 2" Length: 11-1/2" Max. Temp.: 130 Degrees F Connection Type: Socket Sub-Category: PVC Seal Material: Neoprene Gasket and Flapper Overall Height: 13" Width: 9-1/2".
Country of Origin (subject to change): United States.

Check Stock

Northern Brewer - MegaPot Stainless Steel Brew Kettle with Volume Markings (10 Gallon w/Valve and Thermometer)

10 Gallon (40 quarts / 37.8 liters) capacity.
4mm Tri-Clad Bottom. All Stainless Steel Construction.
Graduated Volume Markings inside the kettle.
Weld-less Ball Valve Assembly and Weld-less Thermometer.

Check Stock

1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/2" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..

Check Stock

Tite Reach 3/8 Do-it-Yourself Extention Wrench Model

[Repair with Ease]: Depend on the ABN Wrench Extender Tool 3pc Socket Wrench Extension when repairing trucks, vans, cars, and more.
[For Your Tools]: Socket extension allows you to switch between 3 adapters to fit your socket or impact wrench (not included).
[Quality You Need]: No need to worry about this torque wrench bending and breaking at the seams.
Offset extension wrench is constructed of heavy-duty....
[Easy to Use]: Torque wrench allows you to fit into awkward and hard-to-reach areas under the hood without strain or stress.
[Heavy-Duty Size]: Socket set extender measures 15 inches (39cm) to provide maximum stability as you work on your cars and trucks.

Check Stock

1/2 Brass Electric Solenoid Valve 110V AC NBR Seal N.O Air Gas,Fuel

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/2" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..

Check Stock

1/4 Brass 12V DC Electric Solenoid Valve NPT NBR Seal Normally Open Air Water

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/4" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..

Check Stock

1/4\ Brass Electric Solenoid Valve 110VAC Normally Closed VITON

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....

Check Stock

1 Brass Electric Solenoid Valve 110VAC Normally Closed Water Diesel.

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....

Check Stock

B&W Trailer Hitches 1067 Chevrolet and GMC Gooseneck Hitch

Fits: 2001-2010 Chevrolet and GMC 3/4 Ton HD Long and Short Bed Trucks.
Fits: 2007-2010 Chevrolet and GMC 1 Ton (1 bed crossmember over the axle).
Bolts to existing holes in the frame with no drilling or welding.
solid, one-piece machined receiver socket.
Flexible latch pin handle attached to a spring loaded, 5/8" steel locking pin that goes completely through the ball.

Check Stock

3/4 Brass Electric Solenoid Valve 24VDC N.C Air Water Fuel VITON

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....

Check Stock