Reviews3pcs Welded Ball Valve

DERNORD 1PC Type Stainless Steel Ball Valve 0.5 NPT Standard Port for Water Oil and Gas

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinly insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need....
Check Stock

CURT 45155 Fusion Trailer Hitch Mount with 2-Inch Ball & Pin Fits 2-In Receiver 7,500 lbs 2 Rise black

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch rise to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 2-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45650 Multi-Ball Trailer Hitch Ball Mount, 1-7/8, 2, 2-5/16-Inch Balls, Fits 2-Inch Receiver, 10,000 lbs

  • HIGHLY VERSATILE. This trailer hitch ball mount features 3 welded trailer balls on a single shank to accommodate a wide variety trailers. It's perfect for multiple trailer owners! Simply turn the ball mount to the ball size needed.
  • DEPENDABLE STRENGTH. The 1-7/8-inch ball is rated for 5,000 lbs. GTW / 500 lbs. TW, the 2-inch ball 7,500 lbs. GTW / 750 lbs. TW, and the 2-5/16-inch ball 10,000 lbs. GTW / 1,000 lbs. TW (limited to lowest-rated towing component).
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with welded tow balls for ready coupling to your trailer. Because the welded hitch balls are permanently attached, they can never be loosened.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish. This helps resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. This multi-ball mount has a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. To install it on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver.
Check Stock

CURT 45152 Fusion Trailer Hitch Mount with 1-7/8-Inch Ball & Pin, Fits 2-Inch Receiver, 5,000 lbs, 2-In Rise

  • DEPENDABLE STRENGTH. Rated to tow 5,000 pounds gross trailer weight and 500 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch rise to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 1-7/8-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45131 Fusion Trailer Hitch Mount with 1-7/8-Inch Ball & Pin, Fits 2-Inch Receiver, 5,000 lbs, 2-In Drop

  • DEPENDABLE STRENGTH. Rated to tow 5,000 pounds gross trailer weight and 500 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch drop to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 1-7/8-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

Red Headed Rebel RHR Ghost Hitch Ball Mount Attachment

  • Ball mount attachments for Red Headed Rebel RHR Ghost cushion hitches..
  • 15 Styles - Drop, dual call, raised, pintle, drawbar, clevis pin along with sway bar tab attachments and more.
  • Drop, standard & raised mounts come with 2" or 2-5/16" bolt on ball. Dual combo ball has a 2" and 2-5/16" balls and is a welded combo ball mount with clear zinc plated finish. The rest are black powder coat finish. The raised, drop and regular ball mounts has a bolted on hitch ball..
  • Dual combo ball has a 2" and 2-5/16" balls and is a welded combo ball mount with clear zinc plated finish. The rest are black powder coat finish. The raised, drop and regular ball mounts has a bolted on hitch ball..
  • Bolt on ball capacities: 20,000 lbs tow & 2,000 lbs tongue weight with 2-5/16" ball & 10,000 lbs / 1,000 lbs with 2" ball.  Draw bar mounts have 1" holes & are NOT for use with hitch ball).
Check Stock

CURT 45002 Multi-Ball Trailer Hitch Ball Mount, 2, 2-5/16-Inch Balls, Fits 2-Inch Receiver, 10,000 lbs

  • HIGHLY VERSATILE. This trailer hitch ball mount features 2 welded trailer balls on a single shank to accommodate a wide variety trailers. It's perfect for multiple trailer owners! Simply turn the ball mount to the ball size needed.
  • DEPENDABLE STRENGTH. The 2-inch ball is rated for 7,500 lbs. gross trailer weight / 750 lbs. tongue weight, and the2-5/16-inch ball is rated for 10,000 lbs. gross trailer weight / 1,000 lbs. tongue weight (limited to lowest-rated towing component).
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with welded tow balls for ready coupling to your trailer. Because the welded hitch balls are permanently attached, they can never be loosened.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch shank is protected with a durable black powder coat finish, and the trailer balls have a polished chrome plating.
  • EASY TO INSTALL. This multi-ball mount has a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. To install it on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver.
Check Stock

CURT 45651 Multi-Ball Trailer Hitch Ball Mount, 1-7/8, 2, 2-5/16-Inch Balls, Fits 2-1/2-Inch Receiver, 14,000 lbs

  • HIGHLY VERSATILE. This trailer hitch ball mount features 3 welded trailer balls on a single shank to accommodate a wide variety trailers. It's perfect for multiple trailer owners! Simply turn the ball mount to the ball size needed.
  • DEPENDABLE STRENGTH. The 1-7/8-inch ball is rated for 5,000 lbs. GTW / 500 lbs. TW, the 2-inch for 10,000 lbs. GTW / 1,000 lbs. TW, and the 2-5/16-inch ball for 14,000 lbs. GTW / 1,400 lbs. TW (limited to lowest-rated towing component).
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with welded tow balls for ready coupling to your trailer. Because the welded hitch balls are permanently attached, they can never be loosened.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish.
  • EASY TO INSTALL. This multi-ball mount has a 2-1/2-inch x 2-1/2-inch shank to fit virtually any industry-standard 2-1/2-inch receiver. To install it on your vehicle, simply insert the shank into your class 5 hitch receiver.
Check Stock

CURT 45675 Multi-Ball Trailer Hitch Ball Mount, 1-7/8, 2, 2-5/16-Inch Balls and Tow Hook, Fits 2-Inch Receiver, 10,000 lbs

  • HIGHLY VERSATILE. This trailer hitch ball mount features 3 welded trailer balls on a single shank to accommodate a wide variety trailers. It's perfect for multiple trailer owners! Simply turn the ball mount to the ball size needed.
  • DEPENDABLE STRENGTH. The 1-7/8-inch ball is rated for 3,500 lbs. GTW / 350 lbs. TW, the 2-inch ball 5,000 lbs. GTW / 500 lbs. TW, and the 2-5/16-inch ball 10,000 lbs. GTW / 1,000 lbs. TW (limited to lowest-rated towing component).
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with welded tow balls for ready coupling to your trailer. Because the welded hitch balls are permanently attached, they can never be loosened.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch shank is protected with a durable black powder coat finish, and the trailer balls have a polished chrome plating.
  • EASY TO INSTALL. This multi-ball mount has a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. To install it on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver.
Check Stock

Nipple, 2 X 6 In

  • Price For: Each Stem Type: Blowout Proof Seat Material: PTFE Standards: UL, CSA Body Material: Brass Ball Valve Basic Body Material: Brass Port: Full Ball Valve Product Group: Manual Valve Structure: 2-Piece Handle Material: Steel with Corrosion Resistant Plating Item: Ball Valve Body Style: Inline Ball Material: Chrome Plated Brass Handle Type: Lever.
  • Temp. Range: 0 Degrees to 400 Degrees F Stem Material: Brass Max. Pressure: 600 psi CWP Pipe Size: 1/2" Tube Size: 1/2" Connection Type: Sweat x Sweat Features: General Purpose Country of Origin (subject to change): China.
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...i, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping.
  • The main hose is 80" long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a ball valv....
Check Stock