Reviews4 Low Bed Trailer

TLAPS 7422446674615 For 2002-2008 Dodge Ram 1500/2003-2022 2500 3500 Class 3 III Black 2\ Trailer Hitch Receiver With 2 Inch Drop Loaded Ball Mount

  • Application: For 2002-2008 Dodge Ram 1500 Models, 2003-2010 Dodge Ram 2500 / 3500 Models, 2011-2022 Ram 2500 / 3500 Models ( Attention Note: Will Not Fit Models With Factory Receiver, Will Not Fit Dodge Ram 3500 Models With Cab & Chassis Bed ).
  • Trailer Hitch + Loaded Ball Mount ( Trailer Ball, Pin & Clip Are Included ).
  • Hitch Class: Class 3, Receiver Size: 2" Receiver Tube, Towing Specifications: Weight Carrying Capacity - 6000 lbs, Tongue Weight - 600 lbs, Weight Distribution - 10000 lbs, Weight Distribution Tongue Weight - 1000 lbs.
  • Loaded Ball Mount: Receiver Size: 2" Receiver Tube, Towing Specifications: Gross Trailer Weight - 3500 lbs, Tongue Weight - 350 lbs, Trailer Ball Diameter - 1.875, 2" Drop For Trailer Leveling, Length" 8 1/4.
Check Stock

CURT 56070 7-Foot Vehicle-Side Truck Bed 7-Pin Trailer Wiring Harness Extension, Select Chevrolet, Dodge, Ford, GMC, Nissan, Ram, Toyota , black

  • TRUCK BED EXTENSION. This trailer wiring harness is designed to be an extension of the existing tow wiring of your truck. It retains use of the rear 7-way RV blade socket, while adding an additional 7-way socket in the truck bed.
  • EASY TO INSTALL. No wire cutting! No splicing! This trailer wire extension plugs into existing factory wiring on your truck and has a 7-foot harness for flexible positioning in the truck bed (2-1/8-inch hole saw required for installation).
  • HEAVY-DUTY CONNECTOR. The 7-pin trailer wire extension can be used to connect trailer taillights, brake lights, reverse lights, turn signals, electric trailer brakes and an auxiliary power wire.
  • DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of the 7-pin truck wiring socket is made from durable molded black plastic and has a spring-loaded dust cover to protect the connection points.
  • VEHICLE-SPECIFIC. This vehicle-trailer wiring extension harness is designed for select models of Chevrolet, Dodge, Ford, GMC, Nissan, Ram and Toyota vehicles, ensuring the easiest possible installation.
Check Stock

SPARKWHIZ Recessed D-Ring Tie Down Anchor Kit, 4 Pack Trailer D Ring Tie Down Anchor Heavy Duty with Hole Saw Drill for Trailer Cargo Truck Flatbed Pickup (6,000 lb. Capacity)

  • What's In The Package: 4 sets of D-rings and backing plates and 1 Hole Saw Drill. No need to buy a hole saw extra, save your time and money..
  • MAX LOAD 6000LBS: It's up to 6000lbs straight pull capacity for each flush mount tie down anchor..
  • WIDELY USED IN TRANSPORTATION: Great bearing capacity of heavy-duty D ring tie down anchors, makes it so essential for trailer floor, flatbeds, pickup truck bed..
  • FOR CARGO SECURITY: The recessed trailer tie down anchors are bolted into the trailer bed and they are lifted upward to tie down cargo stably while lies flush in the pan when not in use..
  • FULL-KIT PACKAGE: 4 sets of D-rings and backing plates with all needed bolts, nuts and washers included. Any questions, please feel free to contact us..
Check Stock

Partsam 12V Waterproof Square LED Trailer Tail Light Kit Clear Lens Red Trailer Brake Stop Tail Turn Signal Running Lights License Kit for Camper Truck RV Boat Trailer Snowmobile Marine Under 80'

  • 4.56″ long x 3.78″ tall x 2.63″ deep.
  • trailer light kit with 2 stud mount waterproof LED tail lights, corrosion-resistant license-plate bracket, 25ft wiring harness(one 21.98 feet and one 3.93 feet wiring harness), stainless steel mounting hardware, 2pcs amber clearance lights and 4pcs reflective sticke. 2-stud mount on 2″ centers.
  • 2 Clear/Red, waterproof, stud-mounted LED trailer tail lights for less than 80″ trailers tractors truck boat snowmobile, esp. ideal for jet ski trailer lights. Square trailer light serves 7 functions: Stop light, Turn signal light, Tail light. Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator(only for LH Side/Driver Side).
  • For this Red submersible LED trailer light kit, Right light has 16 LEDs (12 face, 4 side).
  • Left/streetside light has 21 LEDs (12 face, 4 side, 5 bottom). These trailer tail lights has no screws on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. excellent tightness makes it be definitely IP67 waterproof and submersible. Of course, you can also put the clear epoxy around it for a guarantee.
  • White+ Yellow, front side works and is high brightness.
Check Stock

Partsam 4Pcs 4" Round Red LED Stop Turn Tail Lights Brake Trailer Lights 24LED, 4 Inch Round Led Trailer Tail Lights Red Flange Mount Waterproof for RV Trucks 12V DC

  • Package includes 4 Pieces 4 inch Round Led Stop Turn Tail Lights Flange Mount Red with 24 LED.
  • This Waterproof round led trailer lights 24 LED serves 3 functions as stop light, turn signal light and tail light.
  • Mounts on surface of trailer with built-in flange.
  • These round tail lights are Approx. 5.4 inch diameter flange ring and 4" inner diameter and 1.1" Thickness and require a 4.38" diameter hole(check detailed page 1).
  • IP65 waterproof light fixture and withstand the corrosion of sand, dust, dirt, rain, snow etc..
  • Easy to install: these 4 round led lights are HARDWIRED with 3 wires, Gray is the ground, red is the high brightness for stop light / turn light / brake lights and Green for low brightness as tail light / running light.
  • These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each LED Light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb.
  • Universal Fit: These round led tail l....
Check Stock

Partsam 4Pcs 4" Inch Round Led Stop Turn Tail Back-up Reverse Fog Lights 12 LED Include Lights Grommet 3-Prong Wire Pigtails Round LED Trailer Tail Light Kit for Truck Trailer RV( 2 Red + 2 White)

  • Package includes 2 Pieces 4 inch Round Led Stop Turn Tail Lights Red and 2 Pieces 4 inch Round Led fog back-up reverse Lights White, Round rubber Grommets and 3-prong wire pigtails are included for complete installation.
  • These Waterproof round led trailer lights 12 LED serves as the following functions: stop light, turn signal light,tail light(red lights) and Backup Lights or Reverse Lights(White lights).
  • Recessed mount with rubber grommets and Pigtails and accepts standard 3-prong plug.
  • These round tail lights are Approx. 5 inch Grommet Ring and 4" inner diameter and 1 3/16" Thickness, Please drill a hole about 4.5" to install.
  • IP65 waterproof and please do not use it under water.
  • Easy to install: White is the ground, red is the high brightness and Black for low brightness.
  • These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each round trailer light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb.
  • Universal Fit: These round led trailer tail lights are compatible with almo....
Check Stock

Partsam Set RED AMBER LED Trailer Fender Bullet 3/4" Led Clearance Marker Light Left Right

  • Partsam SET(RIGHT&LEFT) Bright Red and Amber LED Trailer Fender Marker Lights.
  • Pre-wired assembly mounts on top or side of fender.
  • Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. For trailers over 80" wide. Sealed, waterproof lenses..
  • Amber LED light points toward front of trailer to act as front clearance light.
  • Red LED light faces rearward to act as rear clearance light.
  • 2-Wire design - includes ground wire and lead wire for power(Black is positive and White is negative).
  • Installs on left fender (driver's side) of trailer & right fender (passenger's side) of trailer, NO SCREWS INCLUDED.
  • LED Fender Lamps utilizing low profile single-diode LED lamps mounted into an equally low profile housing these lamps are durable, attractive and inexpensive.The LED lights are 3/4" Round. Housing dimensions: please check the pictures in the listing.
Check Stock

ECOTRIC Fifth 5th Wheel Rail Installation Kit & Gooseneck Trailer Hitch for Full-Size Truck Bed Gooseneck Ball Plate & Trailer Hitch Mount Rail 2 Packages

  • 【Description】 This fifth wheel rail installation kit & gooseneck trailer hitch combination allows you to pull a Gooseneck trailer using the 5th wheel "Rails" in the bed of your truck..
  • 【Fitment】 Universal brackets fit most applications,Compatible hitches: Curt, Draw-Tite, Hidden Hitch, Reese, Valley and Husky..
  • 【Base Rails】 Base rails provide necessary attachment points for fifth wheel trailer hitches Multiple mounting holes for different frame sizes. Adapter brackets can be used to ease installation on certain vehicles..
  • 【Fifth Wheel Trailer Hitch】 2-5/16” heat treated ball. Ball is offset 2” to accommodate 6 & 8 ft. truck beds. Weight Carrying:6,250 lbs. (TW/GTW). Weight Distributing: 25,000 lbs. (TW/GTW) Center of the ball is 10-1/2" from one end of the plate and 14-1/2" from the other. Curve in plate provides a 2" rise..
  • 【Notice】Package includes 1X Fifth Wheel Rail Installation Kit & 1X Gooseneck Trailer Hitch（Bed Gooseneck Ball Plate & Trailer Hitch Mount Rail）. You will receive 2 packages..
Check Stock

PLAYMOBIL Tractor with Trailer

  • Collect the hay around the farm with the Tractor with Trailer.
  • The trailer bed has plenty of space to collect hay bales or the day’s harvest.
  • Once the trailer is filled, you can fold down both the side and back walls to access the harvest, or you can tip the trailer to empty the contents.
  • The tiltable shovel can scoop up hay bales and raise it up to transport it to a new location.
  • Set includes one figure, tractor and trailer, hay bales, shovel, and other accessories.
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Check Stock

CURT 51140 TriFlex Electric Trailer Brake Controller, Proportional

  • INTELLIGENT BRAKING. This trailer brake controller operates with an integrated circuit called a triple-axis accelerometer. This circuit detects motion on three planes and provides braking power accordingly, up or down a hill.
  • EASY ADJUSTMENT. The TriFlex brake controller is highly adjustable to accommodate different vehicles, trailers and loads. It provides 9 levels of sensitivity adjustment and features driver-selectable power output and manual activation.
  • COMPACT DESIGN. This electric brake controller has a sleek, subtle design to avoid dominating the dash of your vehicle. It measures only 3-1/4 inches x 4 inches x 7/8 inches. The TriFlex perfectly balances a compact design with powerful operation.
  • VERSATILE. You can use this electric trailer brake controller on virtually any trailer with 1 to 4 axles (2 to 8 brakes). It is also fully compatible with cruise control, anti-lock brakes, low-voltage systems and PWM systems.
  • SIMPLE SETUP. Installing and setting up the TriFlex trailer brake controller is fast and easy. It can be plugged into your vehicle in minutes using a vehicle-specific quick plug harness (sold separately). It also has automatic leveling and calibration.
Check Stock