Reviews4 Output Relay

WOWOONE 30 Types 74HCxx Series Logic IC Assortment Kit, Logic Gates, Integrated Circuits Assortment Kit, TTL, High-Speed Si-Gate CMOS IC, Low-Power

Input point X element x0-x7, DC24 input, low level valid. X0-5 is the high-speed counting input port (default: 12K,100KHZ optional)..
Output analog voltage WR3A instruction, corresponding to the value 0-4095. Intermediate relay M: M0-M3071, the power loss preservation range can be set..
The maximum speed current is 1A. External load common terminating + 24, the other end received the PLC output port Y..
Y0-Y5 is optional relay or transistor output, relay output current 5A. The transistor output DC24V, the current maximum 1A..
100Ms timer: t0-t199, accumulative power off save t184-t199.
10Ms timer: T200-T249, accumulative power off saving T246-T249.
1Ms timer: T250-T383, where T250-255 is cumulative.
16-bit counter: C0-C199, power off to save C100-199.
32-bit counter: C200-C219, power off to save C220-C234.

Model No.: SSR-80DA；If you want to reach 80A, you need to add a large heat sink and fan.
output Voltage : 24-480vac；Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A，It is necessary to separately configure the heat sink..
Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
material : metal, plastic, electronic parts.

Upgraded Version – Automotive relays built in fuse socket included 30A blade fuses with heavy duty 14AWG wires for main contact. No need of a separate fuse holder, saving space and money. Bosch style 4-Pin SPST (Single Pole Single Throw) Relay..
Mounting Design Feature – The interlocking mounting design of unique male and female slot on each socket edge, connect relays together and manage cables easily, offering clean and neat installation..
Easy Wiring – The relay sockets come with color-labeled wires for load/accessories convenient wiring. Black – Ground (85), Red – VDC (30), White – Trigger (86), Blue – Output N/O (87).
Wide Application – Widely used in car keys power control, over-load protection, trunk release, polarity change, power door lock/actuator control, change a low current output to high current, add ignition/accessory outputs, control motors/other electronics etc..
Package includes: 5 relays, 5 relay harnesses, and 5x30A blade fuses..

【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
【Wide Application】- These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..

The 12v relay harness base contains 3*12 AWG and 2*16 AWG cables, length: 5.5 in, which have higher load-bearing capacity and more stable performance..
Function: 12VDC (14V Max) 5 Pin SPDT (Single Pole Double Throw) Relay with 40A/30A High Switching Capability..
Wire Specifications: White – Ground (85), Blue – VDC (30), Black – Trigger (86), Red – Output N/C (87a), and Yellow – Output N/O (87)..
The dc car relay adopts waterproof sealing technology at the bottom and a fixed back strip on the back, which is suitable for various complicated installation environments..
Relay and harness kit made by high-grade flame retardant materials to ensure superior quality and long lifespan. 2 Years Warranty..

5V 8-Channel Relay interface board, and each one needs 15-20mA Driver Current.
Equipped with high-current relay, AC250V 10A.
Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP432, TTL logic).
Indication LED's for Relay output status.

【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
【Wide Application】- These 5v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..

Compatible with hydronic floor heating and central heating.
also compatible with electric heat applications using a relay (see accessories).
5-Ampere (resistive) 24-Volt, 120-Volt, 240-Volt R, W.
Millivolt compatible, SPDT dry contact relay output.
Remote input enables change of temperature modes by phone (Telephone controller required – Aube by Honeywell CT240).
Low battery indicator gives 60-day warning to replace battery (2 ‘AA’ batteries required).
Dimensions (height by width by depth): 4.9-Inch by 3.8-Inch by 1-Inch.

Large Capacity Relay Holder – This relay box is 6 slots relay panel design, which includes 5 slots for 5 pin Bosch style relays, 1 slot for RTT7121 4 pin relay..
ATC/ATO Fuse Relay Box – This fuse block with relay is also 6 slots relay holder design for ATC/ATO fuses, which makes the fuse relay become safer when use..
Suitable Terminals – This 12v relay box will also come with terminals for relays and fuses, which will enables you to install and use the fuse and relay box at once..
Top & Bottom Cover – This relay box 12v automotive will come with a top cover and a bottom cover, which makes the relay fuse box become a waterproof relay box..
What you get – 1 x Fuse Relay Block with Top and Bottom Cover, 5 x Bosch Style 5 Pin Relay, 1 x RTT7121 4 pin relay, 16 x Blade Fuses(4 x 10A, 4 x 20A, 4 x 25A, 4 x 30A), 41 x Metallic Terminals, 1 Year Warranty. Feel free to contact us if confused..

Dual activation cooling fan relay will turn your cooling fan on when the engine reaches the preset temperature of the thermostatic switch mounted in the engine head or when the A/C is turned on.
Ideal for installing air conditioning in your project car.
Features simple to use Posy-taps for the ignition and A/C compressor connections.
Kit includes: 40-amp relay with mounting base & wiring (6' input, 4' output), 30-amp circuit breaker, thermostatic switch, adapter, mounting hardware and insulated terminals.