Reviews4 bromo 1

SEDY 16-Piece Punch and Chisel Set, Including Taper Punch, Cold Chisels, Pin Punch, Center Punch

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Product material: made of Chrome Vanadium Steel, hardness: 54~58HRC. Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1/4" x 6-3/4".
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4".
  • 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".
Check Stock

NEW 9 pcs 1/2

  • 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
  • Contains: (3) pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3").
  • Contains: (3) pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), (3) pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").
Check Stock

Rothco Black M-51 Engineers Bag, Black

  • Main Compartment Measures 10 1/2" X 10 1/2" And Features Large Main Flap With Metal Turning Lock Closure.
  • Tons Of Gear Storage Available With 1 Small Hook And Loop Pocket (5" X 4" X 1 1/2"), 1 Small Open Top Pocket (5" X 4" X 1"), 5 Pen Holder Loops And 1 Large Hook And Loop Pocket (4 3/4" X 8 1/2" X 1").
  • Two Side Pockets One Pocket With Mesh Corners And Hook And Loop Closure (5" X 4" X 1 1/4") And One Pocket With Hook And Loop Closure (3 1/2" X 4" X 1 1/4") Are Great For Small Electronic Devices.
  • Shoulder Bag Measures 12" X 14" X 5 3/4" Overall With Detachable And Adjustable Shoulder Strap Measures 59" When Fully Extended.
  • WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects and other reproductive harm..
Check Stock

HORUSDY 16-Piece Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts....
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x....
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6".
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC.
Check Stock

Diversified Fastening Systems GCPT14134 T Anchor 1/4 x 1 3/4 PK4

  • Price For: Each Includes: Body, Nut, Washer Meets/Exceeds: G.S.A. FF-B-588C, A.N.S.I. A58.1, A.S.T.M. B-633 Anchor Type: Toggle, Gravity Activated Type: T-Anchor Box Count: 4 per pack Head Style: Nut Ultimate Shear (Lb.): 1500 Ultimate Pullout (Lb.): 700 Thread Length (In.): .6 Size (In.): 1/4 x 1-3/4 Size: 1/4 x 1-3/4" Shank Length (In.): 1-3/4.
  • Max. Work Thickness (In.): 1 Hole Dia. (In.): 1/4 Grip Range (In.): 1 Bolt Dia. (In.) / Threads/In.: 1/4 - 20 Anchor Length (In.): 1-3/4 Anchor Dia./Drill Bit Sz. (In.)/TPI: 1/4 Country of Origin (subject to change): United States.
Check Stock

Rothco O.D. M-51 Engineers Bag, Olive

  • Main Compartment Measures 10 1/2" X 10 1/2" And Features Large Main Flap With Metal Turning Lock Closure.
  • Tons Of Gear Storage Available With 1 Small Hook And Loop Pocket (5" X 4" X 1 1/2"), 1 Small Open Top Pocket (5" X 4" X 1"), 5 Pen Holder Loops And 1 Large Hook And Loop Pocket (4 3/4" X 8 1/2" X 1").
  • Two Side Pockets One Pocket With Mesh Corners And Hook And Loop Closure (5" X 4" X 1 1/4") And One Pocket With Hook And Loop Closure (3 1/2" X 4" X 1 1/4") Are Great For Small Electronic Devices.
  • Shoulder Bag Measures 12" X 14" X 5 3/4" Overall With Detachable And Adjustable Shoulder Strap Measures 59" When Fully Extended.
  • WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects and other reproductive harm..
  • large black document compartment with 3/4" zipper opening, plastic covered document sleeve.
  • Cell phone pouch, dozens of pouches, compartments and pen holders.
Check Stock

Rothco Vintage Khaki M-51 Engineers Bag

  • Main Compartment Measures 10 1/2" X 10 1/2" And Features Large Main Flap With Metal Turning Lock Closure.
  • Tons Of Gear Storage Available With 1 Small Hook And Loop Pocket (5" X 4" X 1 1/2"), 1 Small Open Top Pocket (5" X 4" X 1"), 5 Pen Holder Loops And 1 Large Hook And Loop Pocket (4 3/4" X 8 1/2" X 1").
  • Two Side Pockets One Pocket With Mesh Corners And Hook And Loop Closure (5" X 4" X 1 1/4") And One Pocket With Hook And Loop Closure (3 1/2" X 4" X 1 1/4") Are Great For Small Electronic Devices.
  • Shoulder Bag Measures 12" X 14" X 5 3/4" Overall With Detachable And Adjustable Shoulder Strap Measures 59" When Fully Extended.
  • WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects and other reproductive harm..
  • large black document compartment with 3/4" zipper opening, plastic covered document sleeve.
  • Cell phone pouch, dozens of pouches, compartments and pen holders.
Check Stock

VIRTIONZ Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle -2pack

  • Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1".
  • 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4".
  • 2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Check Stock

Husky 1/2 In. Drive SAE Deep Impact Socket Set (11-piece)

  • ...nadium steel with heat treatment and chrome flash for durability ensures the strength and rust-resistance of tools..
  • The reversible ratchet with quick release mechanism improves efficiency and performance..
  • Set includes:20-piece 1/4 inch drive regular sockets of SAE & Metric size (5/32'', 3/16'', 7/32'', 1/4'', 9/32'', 5/16'', 11/32'', 3/8'', 7/16'', 1/2'' &5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm).
  • 12-piece 1/4 inch drive deep sockets of SAE & Metric size (1/4'',9/32'',5/16'',11/32'',3/8'',7/16'' & 6, 7, 8, 9, 10, 11mm).
  • 12-piece nut bits of SAE & Metric size (1/4'',9/32'',5/16'',11/32'',3/8'',7/16'' & 6, 7, 8, 9, 10, 11mm).
  • 1-piece spinner handle of 1/4'', 1-piece 1/4'' universal jointer.
  • 1-piece 1/4'' drive extension bar of 3 inch.
  • 1-piece 1/4'' drive extension bar of 6 inch.
Check Stock

Strapless Prom Dresses Long Lace Quinceanera Dresses Tulle Pleated Beaded Ball Gowns Ruffles Masquerade Party Dress Black

  • Stretch crepe with dot mesh Soft and comfortable Ruffle Long sleeve Scoop neck High low hem Center back zipper Full lined Casual and stylish.
  • Model is wearing a size 4, Dress front length measures 42 3/4" from top of the shoulder to front center bottom hem and center back skirt from waist to hem -42 3/4".
  • Business occasion dress, Party dress, Casual dress, Evening dress, Cocktail dress, Wedding dress.
  • Please reference our own size chart before selecting an size number.US size from 2 to 18: US2:Bust:33 1/2"--Waist:27"--Hip:36 1/4" US4:Bust:34 1/2"--Waist:28"--Hip:37 1/4" US6:Bust:35 1/2"--Waist:29"--Hip:38 1/4" US8:Bust:36 1/2"--Waist:30"--Hip:39 1/4" US10:Bust:38"--Waist:31 1/2"--Hip:40 3/4" US12:Bust:39 1/2"--Waist:33" --Hip:42 1/4" US14:Bust:41"--Waist:34 1/2"--Hip:43 3/4" US16:Bust:43"--Waist:36 1/2"--Hip:45 3/4" US18:Bust:45"--Waist:38 1/2"--Hip:47 3/4".
Check Stock

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock