Reviews4 jaw Chuck

Woodstock D4054 3-Inch 4 Jaw Chuck 1-Inch by 8 TPI

This self-centering style 4-jaw chuck has reversible stepped jaws for holding a variety of round or square work piece sizes setup is quick and easy by.
Setup is quick and easy by twisting the knurled adjustment plate on the back of the chuck.
Two 4-Inch wrenches are included for final tightening.

Check Stock

3 Inch 4 Jaw Mini Wood Lathe Chuck Self-centering Lathe Chuck with 1 x 8TPI Thread Lathe Chucks for Woodturning

✔PERFEXT QUALITY:The well-designed chuck body is made of high-quality steel.Will greatly extend the service life of the chuck..
✔APPLICABLE SIZE：The reversible stepped jaws of this mini lathe chuck for internally or externally holding different shapes workpiece,Internal Jaw Clamping Range:3-44mm.External Jaw Clamping Range: 39-85mm..
✔FAST CLAMPING SPEED-This self-centering 3-Jaw chuck does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
✔FREE ACCESSORIES：We will provide a set of installation tools. Two hand tight spanners are convenient for strengthening and clamping the workpiece..
✔WIDE APPLICATION- The chuck is easy to be used and enjoy a high centering precision.The self-centering scroll type chuck for a variety of parts such as hanging shafts, disks, equilateral triangles, etc..

Check Stock

Wood Lathe Chuck 6 inch 4 Jaws Self-Centering Lathe Chucks Thread 1 x 8TPI Lathe Chuck for Woodturning

【EXCELLENT QUALITY】：The chuck is well-designed and made of high-quality steel. The sturdy chuck can stand high-intensity work.Durable wood Lathe chuck and have a greatly service life ..
【APPLICABLE WORKPIECE SIZE】：Internal Jaw Clamping Range: 0.2-3.9inch (5-100mm). External Jaw Clamping Range: 3.8-5.3inch (98-135mm)..
【FREE ACCESSORIES】：We provide a set of installation tools for free . It can help you better install the chuck and processing on the lathe..
【HIGH PERFORMANCE JAWS】：Each jaw can be adjusted to center with superior gripping force, the self-centering improves the flexibility of the chuck , can clamping most shaped workpieces..
【APPLICATION】：Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..

Check Stock

PSI Woodworking Products CSCPENCHK Dedicated Pen Drilling Lathe Chuck

Chuck weighs 1.2 lbs., and is 2.5" in diameter..
The jaws will secure blanks up to 1" across, and 4" long..
The chuck is pre threaded to 1" x 8 tpi to match your spindle..
Includes two tommy bars to tighten and loosen the jaws..

Check Stock

Wood Lathe Chuck 4 Jaws Chuck 6inch lathe chucks for woodturning 1inch x 8TPI Thread Lathe Chucks for Woodworking

【EXCELLENT QUALITY】：The well-designed chuck body is made of high-quality iron. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck..
【APPLICABLE WORKPIECE SIZE】：Internal Jaw Clamping Range: 0.47-2.2inch (12-55mm). External Jaw Clamping Range: 0.74-5.1inch (19-130mm)..
【FREE ACCESSORIES】：We will provide you with a set of installation tools. These can help you better install the chuck on the lathe..
【HIGH PERFORMANCE JAWS】：Each jaw can be adjusted to center respectively with superior gripping force, this improves chuck flexibility, clamping most shaped workpieces can also be realized..
【APPLICATION】：Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..

Check Stock

Nova 23108 Supernova 2 Premier Pro-Tek Chuck Bundle with Pro-Tek 2' Jaw Set, 4' Bowl Jaw Set, 5' Bowl Jaw Set, Woodworm Screw, Plastic Case & accessories, bundled with Nova ILNS 1-1/4' x 8tpi Insert

Pro-Tek 23108 Supernova 2 Chuck Bundle with 1-1/4" x 8tpi Insert Adapter.
Rust resistant nickel plating on chuck body.
Includes Pro-Tek 2″ jaws with dovetail and serrated inner face, JS100N 4" Bowl Jaw Set, and JS130N 5" Bowl Jaw Set.
6 point star head jaw screws for better holding power and quicker fastening, & T-handled 6 point wrench for faster jaw changes.

Check Stock

MILLING INDEXING 4'/ 100 ROTARY TABLE QUALITY PRECISION HORIZONTAL VERTICAL WITH SUITABLE M6 CLAMP KIT & SMALL CHUCK (WITH 65 MM 3 JAWS SELF CENTERING CHUCK)

Quality Tool Set of 4" Regular Rotary Table with a 65 mm 3 jaws Self Centering Chuck with Back Plate & fixings T nut Bolts & M6 clamp kit.
Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground..
Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table..
It can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero..
QUICK FAST DELIVERY THROUGH EXPEDITED SERVICE WITH A TRACKABLE AWB NO. TO USA & WORLWIDE..

Check Stock

LittleMachineShop.com 0XA Quick Change Tool Post Set for 8x12, 8x14 Lathe (4083)

【EXCELLENT QUALITY】：The dedicated pen drilling lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck..
【APPLICABLE WORKPIECE SIZE】：The clamping range of the lathe chuck is approx 8×8 to 23×23mm for square shaped material.Weights 1.43 pounds, and 2.5" diameter..
【FREE ACCESSORIES】：We will provide you 2 tightening levers allows you easily to tighten and loosen the jaws..
【HIGH PRECISION DESIGN】：This chuck has a special V- slot design inside the jaw,which is more suitable for clamp square material. The jaws are attached to the chuck body through an I-shaped structure which has high precision and firmness..
【WIDE APPLICATION】：Applicable to pen-making square material clamping, auxiliary drilling, end milling.With a 1-Inch x 8TPI Thread, which is suitable for most woodworking lathes on the market..

Check Stock

Hymnorq 1/2-20UNF Keyless Drill Chuck 2-13mm Clamping Range with SDS-plus Shank, 1/2 Socket Square Converter and 1/4 Inch Hex Shank, Fit Impact Hammer, Electric Wrench and Air Screwdriver

3-JAW CHUCK - Drill Chuck with universal keyed 3-jaw design can firmly hold a variaty of bit shanks ranging from 2mm to 13mm.
3 ADAPTERS - The 3 different types of adapter can easily convert your tool to a drill, suitable for multiple connecting needs.
The 1/4" hex adapter is for screwdriver, the 1/2" square socket adapter for impact wrench and the SDS-plus adapter for hammer drill / rotary hammer..
CONVINIENCE - Compared with keyed chucks, the keyless chucks can hold bits without additional tool, advoiding the inconvinience of keeping and finding a small chuck key.
DURABILITY - The chuck is high-precision threaded and tapered tightly with hard rust-resistant pp plastic body. The jaws, spings are made of premium steel alloy. All the extensions are applied with rust-proof finishing for extended service life..
WIDE COMPATIBILITY - This drill chuck adapter tool kit is suitable for gyro-screwdriver, wireless screwdriver, impact screwdriver, impact wrench, hammer drill and some angular polishing machines of most brands on the market like Dewalt, Bosch, Dremel, Kobalt, Milwauke....

Check Stock

LANTRO JS 3 Jaw Lathe Chuck, Z011A Zinc Alloy Self Centering Lathe Jaw Chuck Clamp Accessory for Mini Metal Lathe Power Lathe Accessories

QUALITY MATERIAL: The lathe chuck body is made of high-quality zinc alloy, it has high strength and toughness, and durability, and long service life.
2 SETS OF JAWS: Internal and external jaw sets included. Internal clamping range:1.8-56mm/0.1-2.2inch, external clamping range: 12-65mm/0.5-2.6inch.
CONNECTION: The chuck adopts threaded connection, the connection type is M12 * 1.
APPLICATION: Self-centering three-jaw chuck is an ideal choice for holding small woodworking projects and drilling holes, suitable for a variety of lathes.
WEIGHT AND PACKAGING: Weight: 178 grams / 6.3 ounces.

Check Stock

Aogbra 3.75-Inch 4-Jaw Wood Turning Lathe Nickel Plated Chuck and Laser Etched Jaw Set with T Bar Wrench and 6 Point Star Fasteners (1 Inch x 8TPI Thread)

[PREMIUM QUALITY] The chuck body and bearings are made of high-quality, high-performance steel that is precisely machined to industry standards..
[HIGH-PERFORMANCE JAWS] Multiple jaw sets provide great flexibility to the Aogbra chuck. The self-centering jaws provide superior gripping force, allowing for turning workpieces in a variety of different shapes and sizes..
[PRECISION POLISHED COATING] Premium nickel plating and solid construction greatly reduce rust and maintenance, providing a smooth, accurate and beautiful addition to your lathe..
[COMPLETE ACCESSORY SET] This complete lathe chuck set includes the Aogbra chuck, 5 jaw sets and necessary installation tools, and a woodworm screw to provide ultimate flexibility to your projects..
[WIDE APPLICATION] This chuck set has numerous applications for your shop: General Lathe Use, Grinding, Milling, Drilling, Woodworking, and much more!.

Check Stock