Reviews4 jaw Independent Chucks

Drill Chuck 3pcs Drill Chuck Adapter 0.3-3.6mm 0.6-8mm 1.5-10mm with 1/4” Quick Change Hex Shank Chuck Key and 1/2” Dr x 1/4” Quick Change Hex adapter for Impact Drill Tool Attachment

【Complete Drill Chuck Kit】- Package includes 3 drill chucks (clamping range: 1.5-10mm, 0.6-8mm, 0.3-3.6mm), a chuck key and a 1/2" Dr. x 1/ 4" hex....
【Durable Material】- The chuck is made of high-quality alloy steel material with high hardness, wear resistance, strength and toughness, heat....
【Highly Compatible】- The classic keyed 3-jaw design can securely hold all kinds of twist drills and step drills, easily lock and release the....
【Universal Shank】- The drill chuck with a 1/4in hexagonal shank can be quickly connected to any impact driver and converted to a drilling....
【Multi-purpose Tool】- 1/2” Drive by 1/4” Hex adapter can easily convert a power impact wrench into a drill bit, with the best performance at....

Three cutting spurs for faster, cleaner holes, less breakout and extended drilling life.
Full screw-point tip allows bit to self-feed for ease of drilling.
Shorter overall length for drilling in tight spaces. Ideal for holes up to 2" deep.
1/4" quick-change shank reduces slipping in standard chucks and is compatible with all 1/4" quick-change chucks, including impact drills.

Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T (33069 lbs) maximum capacity and a long service time..
Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool..
Bidirectional Operation: The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has 2" (50 mm) axis travel with 7" (180 mm) max reach and 12" (300 mm) max spread..
Humanized Design: Equipped with a security relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility..
Diverse Scenario: A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc..

【Three Size Chucks】The tool set includes three different sizes of chucks, 3.5cm, 4.5cm hexagonal chucks, and multi-functional round chucks. Three sizes of chuck can be installed on the end of the basin wrench, which can be used for different types of sink fittings..
【Ergonomic】The wrench ergonomic short handle design makes you feel comfortable while using it, and the handle has a perfectly sized grip, allowing your hand to hold tightly without slipping, and it is also convenient to use in tight spaces..
【Large Opening Design】The tooth shape and canine tooth design are more suitable for the shape of the sink wrench, with built-in spring, the opening size can be adjusted arbitrarily. The opening range can be adjusted between 56 - 80mm, suitable for a variety of environments requiring wrench operation..
【Durable Material】The bathroom wrench is made of aluminum alloy and ABS. Offers high hardness, impact resistance and durability. With higher precision, higher flexibility and higher efficiency. Comes with a storage box for easy storage and long-term use..

Includes: (1) Barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) Allen wrench, (8) screws, (1) storage case.
Barracuda2 chuck body is 3. 5" Diameter and weighs 2.60 lbs..
pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter.
#1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8".
#2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2".
With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe.
including bowls, spindles, pens, other small turning projects, and much more.
Compatible with all additional C-Series Jaws and accessories: 7-3/4" Jumbo Flat Jaws (CJAWFJ2), 5" Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4" Super Finishing Jaws (CJAWXL), and more!.

Quick change keyless chucks holds various accessories with 1/32” to 1/8” shank sizes. Pay attention to measure the contrast size before buying. Multipro drill adapter compatible for Dremel 4000, 400, 3000, 300, 395, 398, 8220, 8200, 8100, 800....
3-jaw chuck compatible for all Dremel cordless and corded rotary tools(including drill bits, sanding drums, polishing wheels and other light-duty accessories）.
One-piece structure design, alloy material, sturdy and durable, more safer than plastic models. The 3-jaw chuck is well-made, and the built-in spring is stable and durable..
This replacement keyless chuck provides a big improvement in precision and holds these tiny bits far more securely and in better alignment with the rotation of the tool, under high-speed rotation, it not only maintains stability but also improves work efficiency..
Package content: 2 x multipro shank rotary tool accessories keyless chuck..
How long is the warranty/renew? We offer a hassle-free 12-month warranty and 24-hour friendly customer service. If there is any dissatisfaction with the product, or the parts are missing, please contact us at any time, whether it is a new one or a refund, we will definitely give you a satisfactory answer. Be responsible for your choice, let you ....

IRWIN SPEEDBOR drill bits use a tri-flute design for faster chip ejection and less binding.
This 1/2-inch drill bit has cutting spurs with 3 cutting edges for faster, cleaner holes.
A full screw tip allows the drill bit to self-feed for ease of drilling.
The grooved hex shank helps prevent slipping in the drill chuck or bit extension.
Fits virtually any standard 1/4-inch quick-change chucks, including impact drills.
A fast speedbor spade bit that features a Tri-Flute design with a fast chip ejection.
Fits all standard 1/4-inch quick change chucks.
Full screw tip allows the bit to self feed.