Reviews4 way Reversing Solenoid Valves

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

  • These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
  • You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
  • Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
  • These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
  • This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..
Check Stock

3/4 Brass Electric Solenoid Valve 110V AC NPT Normally Open Air Gas Water Viton

  • 3/4" NPT THREAD- Commonly used standard pipe thread in U.S...
  • SOLID BRASS -This valve's body is made of solid brass (very corrosion resistant material)..
  • NORMALLY OPEN- The solenoid's magnetic field will directly move the plunger and close the orifice for any fluid or gas flow, while energized..
  • FLOW DIRECTION- The arrow indicates the flow direction (horizontal mounting please)..
  • VITON GASKET- Viton is space age material that is very chemically inert. As such it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident)..
Check Stock

3/4 Brass Electric Solenoid Valve 12V DC NPT Normally Open Air Gas Water Viton

  • 3/4" NPT THREAD- Commonly used standard pipe thread in U.S...
  • SOLID BRASS -This valve's body is made of solid brass (very corrosion resistant material)..
  • NORMALLY OPEN- The solenoid's magnetic field will directly move the plunger and close the orifice for any fluid or gas flow, while energized..
  • FLOW DIRECTION- The arrow indicates the flow direction (horizontal mounting please)..
  • VITON GASKET- Viton is space age material that is very chemically inert. As such it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident)..
Check Stock

RKX AC Compressor Control Solenoid Valve Compatible with Audi and Volkswagen Compressors made by Sanden PXE16 PXE14 MK5 MK6 B8 TDI

  • Highest quality control valve available GUARANTEED! Our valves feature premium quality materials and craftsmanship. All valves undergo rigorous quality testing and inspections. Our valves are manufactured in an ISO 9001, IATF 16949 certified facility..
  • PLEASE PHYSICALLY CHECK YOUR COMPRESSOR BEFORE ORDERING The manufacture used several suppliers for the AC compressor! This solenoid is only compatible with Sanden PXE16 PXE14 compressors held in with a snap ring and are visually identical..
  • Please note this is a new updated valve and may be longer than the valve found in your compressor. It is 100% compatible with the short style valve..
  • Compatible with Audi and Volkswagen vehicles from 2006 + including Jetta and Golf TDI. The OEM and other aftermarket brand solenoid have an EXTREMELY high failure rate! Will cause intermittent / no AC issues.
  • THIS IS VALVE IS SECURED INTO THE COMPRESSOR BODY USING A SNAP RING. If your valve is held in with a bolt please see our other listing. This part is only compatible with Sanden compressors. If you compressors is manufactured by another company please check our other listings..
Check Stock

Intake & Exhaust Camshaft Position Actuator Solenoid Valve Replacement for Chevy Cobalt HHR Malibu Equinox GMC Terrain Pontiac G6 & more GM Vehicles - 2.0 2.2 2.4L Replaces 12655421,12655420

  • REPLACeS PART # ----- Intake Solenoid #: 12655420, 12628347, 12646783, 12578517, 12679099, 917215, 917-215, 2T1014 | Exhaust Solenoid #: 12655421,....
  • COMPATIBLE VEHICLES ----- These Camshaft Position Actuators (also called VVT Solenoids) replacement for 2006 - 2010 Chevy Cobalt, Chevy Malibu 2008 -....
  • PERFECT FUNCTION ----- Intake & Exhaust camshaft position actuator solenoid valves to clear Check Engine Light CEL codes P0010 P0011 P0013 P0014.....
  • PERFECT OEM FIT ----- Each Camshaft Position Solenoid Valve Actuator is manufactured to the same specifications as the factory actuator. Each Actuator....
  • 1-YEAR WARRANTY ----- Order from both actuator solenoids from SURIEEN comes complete with 12-MONTH Warranty. If either actuator fails on your vehicles....
Check Stock

2 Wire Turbo VGT Solenoid & IPR Pigtail Harness Replacement for 6.0L Ford Powerstroke & Chevy GMC Duramax 6.6L

  • Variable Geometry Turbo (VGT) Solenoid, Injection Pressure Regulator (IPR) Valves, Heui A/B Injectors, Valve Cover Gasket Repair Harness..
  • Compatible with 6.0L Powerstroke Turbo VGT Solenoid (AKA Boost Controller) and IPR Valve 2003-2010 (2003 2004 2005 2006 2007 2008 2009 2010)..
  • Compatible with 6.6L Duramax (LLY/LBZ/LMM/LML/LGH) Turbo VGT Solenoid (AKA Boost Controller) 2004-2016 (2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016)..
  • Female Socket 2-Wire Pigtail Adapter Connector Repair Harness Kit For Ford Power Stroke, Navistar, And GM Duramax Engines..
  • You will get: 1x Connector Adaptor Wiring Harness..
Check Stock

1/4\ NPT Brass Electric Solenoid Valve 12V DC Normally Closed VITON (Standard USA Pipe Thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by AOMAG

  • VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket..
  • ISO/OEM/ODM/CE and1 year warranty. DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid’s magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized..
  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • 1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in US...
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 6 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our AOMAG Motorized Ball Valves..
Check Stock

Honeywell International VR8200A2132 Valve

  • Includes: One 1/2″ x 3/8″ straight busing, one 3/4″ straighr flange, one hex wrench, one pilot compressing fitting for 1/4″ O.D. tubing, 393691 Natural to LP gas conversion kit.
  • Gas valves include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
  • Solenoid-operated first automatic valve opens on thermostat call for heat.
  • Diaphragm-operated second automatic valve opens under control of regulator.
  • closes if gas or power supply is interrupted.
Check Stock

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

Honeywell VR8200A2116 Upgraded Replacement for Furnace Gas Valve

  • Gas valves include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
  • Solenoid-operated first automatic valve opens on thermostat call for heat.
  • Diaphragm-operated second automatic valve opens under control of regulator.
  • closes if gas or power supply is interrupted.
  • All adjustments, wiring connections and pilot outlet are accessible from top of control.
Check Stock

Danco 80442 4-In-1 Sillcock Key, Chrome

  • USAGE: The four keys ensure that you can open any lock on any spigot.
  • COMPATIBILITY: This 4-way Sillcock Key is designed to fit stopcocks, sillcocks and valves.
  • 4 STANDARD DIMENSIONS: 1/4 in., 9/32 in., 5/16 in. and 11/32 in. These are the standard dimensions followed all over the world.
  • 4-WAY SILLCOCK KEY: has 4 female-socket arms.
  • DURABLE STEEL CONSTRUCTION is corrosion-resistant and works on valves that are not compatible with more commonplace tools such as wrenches or pliers.
  • Compatible with stopcocks, sillcocks and valves.
  • Use with 1/4 in., 9/32 in., 5/16 in. and 11/32 in. valves.
Check Stock