Reviews45 Degree Chamfer Reamer

scottchen PRO Diamond Beveling Chamfer Bit 1-7/8 48mm x 5/8 -11 for Marble Glass Ceramic Countersink Hole Trimming for Angle Grinder

【Function】The beveling chamfer bit designed to enlarge or trim round holes in ceramic, glass, granite stone tile marble etc. Also suitable to....
【Application】The diamond beveling bit is 60 degree, 1-7/8”(48mm) diameter fit for the hole size from 3/16” to 1-3/4”. Note: it’s not for....
【Material】Durable steel with diamond plating provide long lasting, even diamond particle will bring a smooth beautiful hole finish..
【Using Tip】The diamond beveling chamfer bit suitable for both wet and dry use. Wearing mask and gloves to protect yourself during working..
【Dimension】1-7/8”(48mm) diameter x 5/8”-11 threads arbor for angle grinder use only. Grit: #80. Degree: 60..

Check Stock

Spetool 90 Degree Carbide V Bits with Tiain Coated 4 Flutes Chamfer End Mill for Caving V Groove and Sign

Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length..
The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..

Check Stock

ATOPLEE T Handle Reamer Tapered Straight Flute Handle Hole Pipe Reaming Tool for Wood Latches/Guitar/Woodworker/Luthier/Repairman Maintenance 5-16mm

The T-Handle Reamer is a useful tool for removing burrs from steel, brass, aluminum, plastic, wood and wallboard.
Made of hardened and tempered tool steel with precision ground cutting edges.

Check Stock

ATOPLEE T Handle Reamer Tapered Straight Flute Handle Hole Pipe Reaming Tool for Wood Latches/Guitar/Woodworker/Luthier/Repairman Maintenance,1/8-1/2 inch 3.18-12.7mm

{Good Quality Material}Made of hardened and tempered tool steel(45# steel) with precision ground cutting edges,more hardness and durable..
{T-Handle Design}Easy turning and sure handling .；The degree of the taper is:10.
{Many Usage}Enlarges bridge pin holes, headstocks, holes for tuners and volume/tone knobs.Also perfect for when a drill could cause cracking in sheet metal, plastic and other materials with little effort..
Total Length:140mm ；Shank Diameter:13mm.
{Package Included} 1pcs Hand Tapered Reamer.

Check Stock

SpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree, 4 Flutes 1/4 inch Shank for CNC Carving and Chamfering

Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length..
The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..

Check Stock

Hotiko 4pcs Countersink Chamfer Hole Drill Bit for Metal Wood Aluminum Iron Plastic Plate-90 Degree Titanium HSS 4241

[Chamfer Range]: 0.4″/2-5mm, 0.6″/5-10mm, 0.8″/10-15mm, 1.2″/15-20mm, 90 degree chamfer can be embedded in many sizes of screws (As Picture Shown)..
[Material]: High Speed Steel HSS 4241, Titanium Nitride Coated..
[Application]: Ideal for cutting through metal, aluminum, copper, wood, plastic, PV plates and thin iron plate (hardness .
[Function]: 90° angle on the point for sharp and precise countersinking. Internal chip removal, to prevent debris from flying..
[Notice]: These bits should use the bench drill. If you use the hand drill, it’s easy to shake and affect the chamfering..

Check Stock

Beer Tap Faucet Handle Black - Set of 10

...al rotation, such as taps, reamers, drill bits, and screw extractors. Manual operation is very simple and convenient, which can improve your work efficiency. It is also very suitable for DIY tapping..
EASY TO USE - When using a tapping wrench, apply even force with both hands. The wrench and the tap should form a 90-degree angle, and the tap and the threaded bottom hole are perpendicular to each other, rotate the adjustable metal tap handle reamer wrench in a certain direction..
QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top priority. If you have any questions, please feel free to contact us and we will try our best to help you..

Check Stock

WORKPRO 15-Piece Router Bits Set, 1/4-Inch Shank Tungsten Carbide Router Bits for Woodworking, Solid Woods, Hard Woods, Chipboard, MDF, DIY, and Carpenter

【VERSATILE ROUTER TOOL SET】The set includes 1/4 inch router bits set, that is dovetail bit, mortising bit, panel pilot bit, cove bit, 4* straight bit (1/8'', 1/2'', 1/4'', 5/8''), roman ogee, 2* cove box bit (R1/4'', R1/8''), 45-degree chamfer, flush trim, confer round, 90-degree "V" grooving bit and storage case.
【SHARP&DURABLE】Carbide router tips head, precisely machined, sharp, and heat-resistant, last 80-90 percent longer than HSS bits. With two cutting edges, the router bits set surpass single-edge bits in making smooth cuts. The inclined angle facilitates the removal of wood chips.
【SAFE FOR USE】These bits with plenty of metal behind each cutting edge.
Anti-kickback design prevents kickback caused by fast feeding and deep bites. What's more, the 1/4 inch shank bits provide greater stability and less vibration during operation.
【EASY TO STORE&CARRY】Storage case with identification for easy access and organization. The case also helps protect the router bits while on the travel or during working time.
【WIDELY APPLICATION】Effective for edging, trimming, veining, and grooving all types of wood.
perfect for door panels, picture frames, plywood, and other carpeting projects. Suitable for the hobbyist and for light work.

Check Stock

KSEIBI 1/4 Inch Router Bit Set, Tungsten Carbide Tip, Black Powder Coating Finish, for Both Beginners and Simi-Professional Woodworking Job 12 Piece Kit (103119)

[VERSATILE] 10-pieces All-purpose wood router bit set featuring the most popular profiles, perfect for straight, trimming, decorative edging, dovetail joinery, grooving and many other furniture or woodworking job applications for home improvement woodworkers and DIY hobbyists.
[PRECISION] 1/4" shank precision grinding that fits all brands router tools smoothly without any difficulty goes in or out. Could fit Makita RT0701C, DeWALT DW616, DW611, DW660, Bosch PR20EVSK, PR20EVS, PORTER-CABLE 690LR etc.
[SHARP] Micro-grain tungsten carbide-tipped router bits provide superior wear resistance, sharper edges for precise finishes, excellent smoothness and long life. The improved hardness uniformity in shank and body provides ultimate durability / resist breakage / stress.
[PROFESSIONAL] Router Bit with innovative compact ball-bearing pilot to guide bit along edge of material. Comes with wooden index case for easy organization and portability.
[WHAT U GET] 1/4-Inch Shank Router bit set which includes 3* Straight bit, 1* Core box bit, 1* Dovetail bit, 1* 90 degree V Grooving bit, 1* Flush trim bit, 1* Round over bit, 1* 45 degree chamfer bit, 1* Roman ogee bit, 1* Hex wrench, 1* Service Card, 30-Days Money Back Guarantee and Worry-free 1-Year Warranty.

Check Stock

uxcell 1/4-28 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel, 2pcs

... surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

Check Stock

ACCUCUT I2DMS 2 Flute 3/8 Carbide End Mill Multi-Function for Deburring Spotting Chamfering & Side Milling 90 Degree bits AlTiN Coating

...ide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced..
Versatile Design: This end mill is designed for multiple purposes, such as chamfering, spotting, deburring and side milling. The chamfer degree is 45 per side..
35° Helix: 2 flute and 35 degree helix design is ideal for roughing application because of its greater strength and capability to carry a larger chip load..

Check Stock