Reviews480mm Radiator

ABN Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit

  • PERFORM TESTS & REFILL FLUIDS: The ABN | Cooling System Refiller Kit Coolant Burping Funnel Radiator Flush Kit prevents squeaky belts and spills when changing radiator coolant, flushing systems, vacuum filling, or replacing hoses.
  • Connects to radiator and seals for hands-free work so you can fill fluid level higher than radiator (allows for coolant expansion) to remove trapped air pockets or head gasket combustion leak bubbles that can otherwise cause cooling system errors and heater issues.
  • FITS YOUR VEHICLE: Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
  • The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
  • Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
  • BUILT TO LAST: 6.75-inch x 8.25-inch (17.1cm x 21cm) overall with 0.75-inch (1.9cm) outside diameter (OD) coolant fill funnel tip that securely fits the included adapters of different sizes.
  • While there are no measurement markings on the coolant spill free funnel, it can hold a maximum of approximately 70 ounces (2.1 L).
  • Constructed from opaque yellow hard-plastic components.
  • 3 out of 5 cap adaptors include steel rings to hold the ada....
Check Stock

Corsair Hydro X Series, XR5, 240mm, Water Cooling Radiator, Black

  • Dual 120mm fan mounts on either side of the radiator are ready for your most ambitious custom Liquid Cooling build..
  • 30mm radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans..
  • A premium COPPER radiator core and 25 micron thick cooling fins provide a high thermal transfer rate optimized for CORSAIR’s performance copper water blocks..
  • High-quality matte Black polyurethane coating delivers a flawless finish to match your system..
  • Integrated fan screw guides make it easy to install fans even when the radiator is fitted into a case..
Check Stock

Thermaltake Pacific DIY Liquid Cooling System RL360 Radiator CL-W013-AL00BL-A

  • 360mm 5-Port High Capacity Radiator. This 360mm radiator is designed to mount three 120mm fan.
  • The radiator is made of aluminum with zinc coating to avoid any metal contact with other material from being corroded.
Check Stock

SCITOO 2pc Water Pump Tool 32mm Fan Clutch Nut Wrench acd Water Pump Holder for BMW for Ford

  • FUNCTION: This coolant vacuum refill kit performs vacuum pressure test and coolant vacuum fill services. Use an extra vacuum pump to work with this airlift coolant refill tool to form a vacuum in the cooling system, then draws coolant into the radiator. Quickly refill the system with no air pockets or hotspots produced, avoid warping or other damage in engine. This cooling system vacuum purge & refill kit is widely suitable for various domestic and foreign cars, SUVs, vans and trucks.
  • MATERIAL & USAGE: cooling system coolant refill tool has taken reliable metal construction to ensure durability and good air sealing. Equip with splendid aluminum & brass manifold body with rubber-covered pressure gauge (Range:-30~0 inHg/-76~0 cmHg). Brass T-connector can connect with vacuum pump for vacuumizing, and two standard air plugs (American & European style) are provided. 60" long coolant filling hose with quick plug can be inserted into the manifold body for refilling coolant.
  • Antifreeze filler kit includes a O.D. 32mm rubber adapter and 3 sizes adapter sleeves, with O.D. 45mm 40mm and 35 mm, fit for most types of vehicles. The adapter sleeves can be attached on the adapter on refill tool, and then replace the radiator cap to seal the cooling system, to help rad....
Check Stock

Corsair Hydro X Series XR5 280mm Water Cooling Radiator, Black,CX-9031002-WW

  • Dual 140mm fan mounts on either side of the radiator are ready for your most ambitious custom Liquid Cooling build..
  • 30mm radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans..
  • A premium COPPER radiator core and 25 micron thick cooling fins provide a high thermal transfer rate optimized for CORSAIR's performance copper water blocks..
  • High-quality matte Black polyurethane coating delivers a flawless finish to match your system..
  • Integrated fan screw guides make it easy to install fans even when the radiator is fitted into a case..
Check Stock

Corsair Hydro X Series, XR5 120mm Water Cooling Radiator (Single 120mm Fan Mount, Easy Installation, Premium Copper Construction, Polyurethane Coating, Integrated Fan Screw Guides) Black

  • 120mm fan mounts on either side of the 120mm radiator are ready for your most ambitious custom Liquid Cooling build, with 14 tube, such a PC heat exchanger is the ability to keep CPU stability and smoothness..
  • 28mm/11inch liquid radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans..
  • Material: Engineered with copper fin and brass water chamber that increase the durability and strength of the water cooling radiator while reducing the weight.
  • Optimized Heat Transfer: Optimized for efficiently pulling heat away from cycling coolant thus achieving maximum heat dissipation at both low and high airflow operation.
  • The 120mm radiator using the black oxidation paint to increase the thermal efficiency.
Check Stock

CORSAIR Hydro Series H110i AIO Liquid CPU Cooler, 280mm Radiator, Dual 140mm SP Series PWM Fans, Advanced RGB Lighting and Fan Software Control

  • Large 280mm radiator: more cooling capacity for cases which have 280mm radiator mounts.
  • Improved cold plate and pump design: better efficiency gives you lower temperatures with less noise.Radiator dimensions: 140mm x 322mm x 27mm,Fan dimensions: 140mm x 25mm.
  • Advanced SP140L PWM fan design: better high-static pressure air delivery and customizable speed.
  • Built-in Corsair Link: monitor CPU and coolant temperature, adjust fan speed, and customize lighting directly from your desktop.
  • AMD bracket included compatible with AM4.
Check Stock

Marame 100mm x 100mm 4mm Thinkness GPU CPU Heatsink Cooling Thermal Conductive Silicone Pad

  • ...lectrical appliance industry. Electronic product heating device, electronic heating module, power supply heating body, LCD TV and computer peripheral RDRAMTM, CD-ROM, CPU, IGPT module and so on, and any equipment needing to be filled with heat dissipation.
  • Use guide: 1.remove the old heat-conducting products of the radiator,and clean the surface of dirt and oil stains. 2.Determine the contact position of the chip and the radiator on the radiator, and cut the appropriate size. 3.Tear off the protective film on one side of the conductive silicone sheet Paste to the fixed radiator position.4.And then tear off the other side of the protective film.5.After installation to the radiator to exert certain pressure to make it close to the radiator surface.
Check Stock

Corsair Hydro X Series Xf Compression 10/13mm (3/8"/ 1/2") ID/OD Fittings Four Pack

  • Dual 140mm fan mounts on either side of the radiator are ready for your most ambitious custom Liquid Cooling build..
  • 30mm radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans..
  • A premium COPPER radiator core and 25 micron thick cooling fins provide a high thermal transfer rate optimized for CORSAIR’s performance copper water blocks..
  • High-quality matte Black polyurethane coating delivers a flawless finish to match your system..
  • Integrated fan screw guides make it easy to install fans even when the radiator is fitted into a case..
Check Stock

Thermaltake Versa N24 Black ATX Mid Tower Gaming Computer Case Chassis with Power Supply Cover, 120mm Rear Fan preinstalled. CA-1G1-00M1WN-00

  • Top Mount I/O Ports: 1x USB 3.0, 2x USB 2.0, 1x Headphone, 1x Mic Front Ports.
  • Power Supply Cover: Streamline your cable management with the included Power supply cover to hide cable clutter.
  • Storage Options: 2x External 5.25 inches Drive Bays, 2 x 2.5 inches / 3.5 inches Internal Drive Bays (with HDD Tray) with back panel accessible hidden drive access.
  • Air/Liquid Cooling Configurations Options: 1 x 240mm radiator(Top/Front). 1 x 120mm radiator (Rear), 2 x 120mm or 2 x 140mm Fans locations (Top) with 2 x 120mm Fan locations (Front).
  • Complete solution: Support up to 240mm radiator liquid cooling for ideal CPU cooling application, up to 415mm long graphic card (without front fan(s)).
Check Stock

Cooler Master MasterLiquid ML360R RGB Liquid CPU Cooler

  • Pump with 12 addressable LEDs. Radiator dimensions : 394 x 119 x 27.2mm , fan dimensions: 120 x 120 x 25 mm.
  • Intel: LGA 775 / 1150 / 1151 / 1155 / 1156 / 1366 / 2011 / 2011-v3 / 2066..
Check Stock