Reviews4inch Long Curtainss

KaTur 3/4Inch Round LED Front Rear Side Marker Indicators Light Waterproof Bullet Clearance Marker Light 12V for Car Truck (White)

  • 3/4inch Miniature Round Truck Clearance Marker Light, Used for clearance Lamps, side marker or identification light,Trailer Light etc..
  • Cable length: 22cm(about 8.66 inches), DC12V, 3 LED lens inside of the lamp offer extreme bright light. Low consumption, high energy, long life..
  • Easily mounts into standard 3/4inch hole..
  • Waterproof Lens, sealed Light, universal fit for most car and truck. DOT/SAE Approved!.
  • Location: front / rear / left / right on trucks, heavy trucks, buses etc..
Check Stock

SpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, 1/4 inch Shank CNC Bits Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral Downcut router bit with 1/4inch shank and 1/4inch cutting diameter, 1/2 inch cutting length, 2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

E-outstanding Wing Nut 20PCS 1/4Inch-20 Black Carbon Steel Wing Nuts Female Knobs Fastenings Hardware Fitting

  • This nut has wings on both sides, which can be tightened or loosened by hand, and can be carried out quickly and frequently..
  • Designed for projects that do not require tools.
  • mainly used for home and office equipment, communication equipment, automobile industry, ship assembly and other machinery industrial equipment that require frequent disassembly and maintenance..
  • Fine workmanship, smooth surface without burrs, complete and deep threads, uniform stress, not easy to slip, strong and durable, common on components that need to be adjusted or are not permanent..
  • Made of high-quality galvanized carbon steel, environmental protection, high hardness, no deformation, anti-rust and corrosion resistance, suitable for indoor, outdoor or humid environment, long service life..
  • Diameter: 1/4Inch.Thread: 20.Colour: Black.Package includes: 20PCS 1/4Inch Wing Nuts..
Check Stock

DEWALT Bit Holder, Magnetic, 4.75-Inch (DW2055B)

  • ☞High-quality Material: The keychain extension rod is made of aluminum alloy, and the interior is not completely empty. It can be fitted with a short bit or a long bit..
  • ☞Drill Bit Extension Holder Keychain: This handy and flexible 1/4 Inch hex shank screwdriver bits holder is used to extend all kinds of screwdriver bits and make the conversion of screwdriver bits easier..
  • ☞Portable & Compact: Comes with a chain buckle, which can be hung on a belt. You can clip it to your tool bag, keychain tools and gadgets, and no more diging through your pocket. You can also use the keychain post with your favorite carabiner according to your needs..
  • ☞Smooth & Safe to Use: The smooth surface processing and pull-out bushing can avoid accidental dropping of tools and facilitate high-altitude operations.The powerful ball lock buckle can carry tools up to 500g in weight..
  • ☞Extensive Usage: Universal 1/4inch quick hex shank and 1/4inch hex socket fit most electric drivers, hand-held drivers and bits.Suitable for drill, screwdriver, batch head and other to transfer..
Check Stock

SpeTool Carbide Spiral Router Bits Up&Down Compression Bit 1/4 X 1 inch Cutting Size with 1/4 inch Shank for Woodwork CNC Router Bit Engraving Carving Mortise Groove Tools

  • UP & DOWN solid carbide compression spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for overall length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece.
  • The route bit suit for CNC router any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

X-Haibei RV Trailer Electric Power Cord Cable Hatch Camper Hose Storage Door Compartment Lock 2 Keys W 6-1/4 inch, H 6-3/4 inch (Black)

  • Accept Cable Size: Max. 1 -1/4inch in Dia..
  • Please pay attention to your CABLE SIZE and PLUG SIZE, if it fits your job..
Check Stock

SpeTool Tapered Ball Nose Router Bit 1/4\ X 3\ with 1.0mm Tip Diameter（0.5mm Radius） Ball Nose End Mill 4.82Deg for CNC Machine Engraving Carving Bits Woodworking H-Si Coated

  • Tapered angle Ball Nose End Mill / Cone Cutters.
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated.
  • Tip Diamter: 1.0mm, Radius: 0.5mm, Flute Length:1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.82Deg.
  • For CNC,Engraving machine, X Carving plywood, hardwood, acrylic, MDF etc.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

X-Haibei RV Electric Power Cord Cable Hatch Cover Camper Trailer Hose Storage Door Compartment Lock 2 Keys W 6-1/4 inch, H 6-3/4 inch White

  • Accept Cable Size: Max. 1 -1/4inch in Dia..
  • Please pay attention to your CABLE SIZE and PLUG SIZE, if it fits your job. It is a whole box not ONLY THE LOCKS..
Check Stock