Reviews5 25 Inch Enclosure

Skar Audio Single 15" 1200W Loaded SDR Series Vented Subwoofer Enclosure | SDR-1X15D2

  • SDR Series Single 15-Inch Dual 2-ohm Loaded Subwoofer Enclosure.
  • Peak Power: 1,200 Watts | RMS Power: 600 Watts.
  • Pre-wired Internally for a 1 Ohm Final Impedance Load at the Terminals for an Easy Installation.
  • Premium Vented Enclosure Made of 5/8" MDF and Finished in Black Carpeting.
  • Double Front Baffle (1.25") with Countersunk Subwoofer Design for Flush and Attractive Appearance.
Check Stock

Make Me Yours (Billionaire's Sub Book 2)

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to....
Check Stock

Rockville VS12K54 12" K5 1400w Car Subwoofer in Vented Sub Enclosure Box - 4 Ohm,Black

  • Rockville VS12K54 Single 12" K5 1400w Car Subwoofer Pre-loaded In Vented Sub Enclosure. Peak Power Handling: 1400 Watts. Program Power Handling: 700 Watts. CEA Rated RMS Power Handling: 350 Watts. Final Impedance: 4 Ohm. MDF enclosure. Bonded stapled and braced. Computer designed vents. Angled at 15 % for perfect bass alignment. High quality aviation grade tweed carpet. Satin Nickel speaker wire push terminals. Enclosure air space is 1.52 Cu Ft per sub.
  • Vent dimensions (inches): 2.25" x 7" x 8.5". Tuning frequency of enclosure: 35 Hz. 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire. 50 Oz High Quality Magnet. Cast Iron Basket With Black Sanded Finish.
  • Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Blue Stitching Cone Reinforcement Ensures Long Life. Polypropylene Dustcap. Gold-Plated spring loaded p....
Check Stock

Skar Audio 2400W Sdr Series Vented Subwoofer Enclosure | SDR-2X10D4, Dual 10" D4 Loaded

  • Sdr series dual 10-inch Dual 4-ohm loaded Subwoofer Enclosure.
  • Peak Power: 2, 400 Watts, RMS power: 1, 200 Watts.
  • Pre-wired Internally for a 1 Ohm Final Impedance Load at the terminals for an easy installation.
  • Premium Vented Enclosure Made of 5/8" Mdf and finished in black Carpeting.
  • Double front baffle (1.25") with countersunk subwoofer design for Flush and attractive appearance.
Check Stock

OWC Mercury Pro 5.25\ Optical Drive External Enclosure (NO Drive)

  • Enclosure kit for 5.25" Blu-ray, DVD, and CD Reader/Writers-Add Plug and Play CD, DVD, and/or Blu-ray disc burning to any USB equipped computer.
  • Supports 5.25" SATA I/II optical drives (all CD & DVD devices and Blu-ray drives 6.77 inches (17.2 cm)) and shorter.
  • High-Speed USB 3.0 Interface in a Sleek, Durable Aluminum Chassis.
  • External Enclosure ONLY, Optical Drive NOT included.
  • Includes: OWC Mercury Pro External Optical Enclosure, 0.6 meter (24") USB 3.0 (Standard-A to Standard-B), External power supply and power cable.
Check Stock

ORICO 5 Bay Raid Hard Drive Enclosure Magnetic Aluminum USB 3.0 to SATA for 3.5 inch HDD Tool Free Storage Case Support 7 RAID Modes Up to 80TB(5X16TB) - NS500RU3

  • 7 RAID MODES -- The ORICO 5 bay raid enclosure equipped with raid function for the various uses. The 5 bay external hard drive enclosure can support raid 0/1/3/5/10/JBOD/Clone and normal raid to allow users to adjust and set up by dialing combination according to your needs..
  • LARGE CAPACITY -- Every single disk of the 3.5 usb raid enclosure can reach up to 16TB, altogether 80TB larger capacity for the enterprises big data backup and storage, also a good choice for nas expansion. The 3.5inch sata enclosure can support 3.5inch HDD and 2.5inch SSD/HDD with a bracket..
  • QUALITY CHIP CONTROL -- The 5 bay usb enclosure adopts three high quality chips, which has both transmission performance for fast 5Gbps and stability and can carry the huge data interaction of the enterprise, reduce the delay..
  • GOOD HEAT DISSIPATION PERFORMANCE -- A 92mm cooling fan built in the usb drive enclosure with honeycomb dissipation holes at the back of the 3.5 hdd enclosure, and the aluminum alloy material made the whole 5 bay external raid enclosure can helps to accelerate the flowing wind and heat dissiapation for prolong the service life of the hard ....
Check Stock

Atrend 8 Soundqubed Dual Vented - SPL Tune Subwoofer Box Improves Audio Quality, Sound & Bass - Woofer Specific Enclosure Certified - Made in USA

  • DUAL 8 INCH VENTED SPL SUBWOOFER ENCLOSURE: The Bbox 8 inch dual vented subwoofer box enclosure is designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. Get the most out of your vehicle's subwoofer with a truck sub enclosure designed for power and quality..
  • SPECIAL FORMULA: We use Aliphatic wood glue on our 8" subwoofer enclosures to ensure an airtight seal between all MDF parts. Each 8 inch subwoofer box also gets a second application of glue around all internal joints after the final assembly. We use a CNC Miter to ensure an airtight fit for your powered subwoofer. Our Dado design and construction offers a precision fit for our car subwoofer boxes & enclosures, which ensures a rattle and noise free environment..
  • HIGH GRADE MDF: Our subwoofer box enclosures are built with a durable & thick MDF for solid frequency response and accurate music reproduction. Our construction offers a precision fit for our car subwoofer boxes & enclosures, which ensures a rattle and noise free environment. 3/4” High Grade MDF Construction for Ultimate structural rigidity and no-flex construction..
  • AIRTIGHT RECESSED SIDE PANELS: We use quality materials like our special aliphatic resin wood glue and bra....
Check Stock

Kicker 44DCWC122 12' 1200W 2 Ohm Complete Subwoofer Bass Package with Loaded Sub Enclosure, Boss 1100W Monoblock A/B Amplifier, and 4 Gauge Wiring Kit

  • COMPLETE SOUND SYSTEM: Upgrade your car's sound system with this complete amplified bass package bundle that includes Kicker 12" dual loaded subwoofers, a sub enclosure, a Boss Audio monoblock A/B amplifier, and a 4-gauge amp wiring kit.
  • CAR SUBWOOFERS: The Kicker 2-ohm subwoofers boast 1200 watts max power and 600 watts RMS.
  • CAR AMPLIFIER: The Boss Audio Riot Mono Car Audio MOSFET Power Amplifier delivers 1100 watts x 1 at 2 ohms to power your subwoofer. It includes a remote bass control.
  • Dimensions (L x W x H): 9.13 x 2.25 x 10.44 inches.
  • SUBWOOFER BOX ENCLOSURE: This Kicker enclosure features a custom port design and is made with heavy MDF construction and thick black carpet.
  • Dimensions (L x W1 x W2 x H): 31.88 x 13.2 x 17.25 x 16 inches.
  • AMPLIFIER WIRING KIT: Deluxe high quality fuse holder.
Check Stock

TN47 - Focal Audio OEM Tweeters PAIR

  • 6.5" OR 5.25" inch component speaker pod enclosure.
  • Speaker Pod enclosures are constructed of 1/8th inch ABS with automotive textured finish..
  • pods can be used in automotive applications, RV's, Boats, and UTV's Smooth, contoured design attractively compliments your vehicles interior Can be....
Check Stock

Atrend Digital Designs 15” Dual Vented SPL Subwoofer Enclosure - SPL-Tune Subwoofer Box Improves Audio Quality Sound & Bass - Woofer Specific Enclosure Certified - Made in USA

  • DUAL 15 INCH VENTED SPL SUBWOOFER ENCLOSURE: The Bbox 15 inch dual vented subwoofer box enclosure is designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. Get the most out of your vehicle's subwoofer with a truck sub enclosure designed for power and quality..
  • SPECIAL FORMULA: We use Aliphatic wood glue on our 15" subwoofer enclosures to ensure an airtight seal between all MDF parts. Each 15 inch subwoofer box also gets a second application of glue around all internal joints after the final assembly. We use a CNC Miter to ensure an airtight fit for your powered subwoofer. Our Dado design and construction offers a precision fit for our car subwoofer boxes & enclosures, which ensures a rattle and noise free environment..
  • HIGH GRADE MDF: Our subwoofer box enclosures are built with a durable & thick MDF for solid frequency response and accurate music reproduction. Our construction offers a precision fit for our car subwoofer boxes & enclosures, which ensures a rattle and noise free environment. 3/4” High Grade MDF Construction for Ultimate structural rigidity and no-flex construction..
  • AIRTIGHT RECESSED SIDE PANELS: We use quality materials like our special aliphatic resin w....
Check Stock

Bbox Car Pro Audio Speaker Enclosures 10” Single Vented Subwoofer/Speaker Enclosure High Grade MDF – Nickel Finish Speaker Terminals 18 Gauge Audio Cables - Improves Audio Quality, Sound & Bass

  • SINGLE 10 INCH VENTED SUBWOOFER ENCLOSURE: The Bbox 10 inch single vented Pro-Tuned subwoofer box enclosure is designed for optimum bass response and low frequency reproduction which is ideal for lower profile sound quality subwoofers. Get the most out of your vehicle's subwoofer with car stuff designed for power and quality..
  • SPECIAL FORMULA: We use Aliphatic wood glue on our 10" subwoofer enclosures to ensure an airtight seal between all MDF parts. Each 10 inch subwoofer box also gets a second application of glue around all internal joints after the final assembly..
  • HIGH GRADE MDF: Our subwoofer box enclosures are built with a durable & thick MDF for solid frequency response and accurate music reproduction. Our construction offers a precision fit for our car subwoofer boxes & enclosures, which ensures a rattle and noise free environment..
  • AIRTIGHT RECESSED SIDE PANELS: We use quality materials like our special aliphatic resin wood glue and brad nails from a pneumatic nail gun to create a tight hold on the MDF parts during the glue drying process to ensure that our subwoofer boxes have an airtight no-leak....
Check Stock