Reviews5 Way Nozzle

KTM Concepts 3 in 1 Silicone Caulking Finishing Tool Kit Caulk Removal Stainless Steelhead Tool Set for Kitchen Windows Bathroom Sink

  • 1. 6 gallon capacity, can run up to 100 hours on low, for rooms up to 600 sq. ft..
  • Permanent ceramic filter removes impurities and puts clean, pure moisture back into the air.
  • Tank and Base infused in a way that Helps Prevent Growth of unwanted particles in the Tank.
  • Includes an extension nozzle that measures 15L and a dual directional mist nozzle.
  • 5 different mist settings: low, medium, high, supreme, turbo.
Check Stock

Niagara Conservation - Tri-Max 3 Flow Rate California Compliant Aerators 0.5 / 1.0 / 1.5 GPM in Chrome and Black - Adjustable Water-Saving Faucet Nozzle

  • MULTIPLE FLOW OPTIONS - This adjustable nozzle utilizes three pressure-compensated flow rates: 0. 5 GPM flow rate for soaping, 1. 0 GPM for washing, and 1. 5 GPM for a powerful rinse mode. Performs well at any water pressure, and the threaded insert is removable to hide the threads..
  • HIGH PERFORMANCE & EFFICIENCY - Niagara Conservation Tri-Max Faucet Aerators increase spray velocity, reduce splash, save water, and save the energy used to heat water. The Tri-Max will provide a forceful sprayer nozzle for your home and sink..
  • EASY INSTALLATION - The Pressure-Compensating Faucet Aerators are easily installed and work with either kitchen or bathroom faucets. Will be a perfect replacement for a broken aerator, a perfect cleaning removal tool for your dishes, glasses, silverware and more..
  • QUALITY DESIGN - This faucet aerator sprayer attachment features a chrome-plated body with 15/16-inch dual threading to fit most male and female faucet sprayers, Santoprene washers, and Colcon internal parts. Male: 15/16"-27, Female: 55/64"-27..
  • WATERSENSE CERTIFIED - Our water-saving faucet nozzle provides high water efficiency as it is WaterSense Certified, offering consumers a simple way to make product choices that use less water with no sacrifice to quality or product p....
Check Stock

Tool Daily Turbo Nozzle for Pressure Washer, Rotating Turbo Nozzle, with 5 Spray Nozzle Tips, Orifice 2.5, 2500 PSI, 1/4 Inch, 6-Pack

  • Nozzle Tips set includes: 1-piece Red Nozzle Tip (0 Degree), 1-piece Yellow Nozzle Tip (15 Degree), 1-piece Green Nozzle Tip (25 Degree), 1-piece White Nozzle Tip (40 Degree), 1-piece soap nozzle tip (65 Degree). 1-piece Quick Connect Turbo Nozzle..
  • Turbo Nozzle: Orifice 2.5. Max. pressure is 172Bar, 2500 PSI. Max. temperature is 45℃, 92°F..
  • Turbo washer nozzle can create a powerful jet of water and cleans up to 40% faster than standard nozzles. Ideal for cleaning heavily soiled bricks and large amounts of dirty. Turbo nozzle for pressure washer fits 1/4’’ fittings of most brands pressure washer wand for intense clean..
  • Pressure washer nozzle: Orifice 2.5. Max. pressure is 4000 PSI..
  • Choose different angles of Pressure washer tips according to actual need. Different angle allows you to clean hard-to-reach areas quickly and easily. Pressure washer nozzle tips can be attached to a Quick-Connect Wand for swifter application..
Check Stock

POHIR Adjustable Pressure Washer Nozzle Tip, 5 in 1 Quick Changeover Power Washing Nozzle with 1/4 Quick Connect, Pressure Washer Multi Nozzle Head 3600 PSI

  • Pressure Washer Nozzle 5 in 1: 5-in-1 change-over nozzle combines 5 spray patterns into one, including angles of 0° (max), 25° (general), 40°(delicate) and soap jet , soap fan. All in one pressure washer tip, enjoy the ease of switching spray settings..
  • Quick Changeover Nozzle: Simply rotate the nozzle head to instantly change the spray patterns. No need to waste time on walking around for swapping nozzle tip for different angles. Much faster and easier than individual pressure washer spray nozzle..
  • Adjustable Nozzle Quick Connect: This adjustable pressure washer nozzle tip has a standard 1/4” QC plug, it can be quickly connected & disconnected to pressure washer wands and fits for most brands of high-pressure washers..
  • Solid & Well Made Pressure Washer Nozzle: Made of high-quality metal, not wimpy plastic. Working pressure up to 3600 PSI. Fits most brands of power washers..
  • Warm Tips: Lubricate the quick change over before screwing on. Please clean and dry it after every use..
Check Stock

JINSLU 2PCS Flux Core Gasless Nozzle, Compatible with Lincoln | Forney | Chicago Welder Part | Clarke MIG Welder, and More, Tweco Mini/#1 (KP1939-1).

  • Replacement nozzle for vinyl hot air gun..
  • Easy to replace, high-quality stainless steel, sturdy and durable..
  • Resistant to high temperature, no air leakage, convenient to replace, versatility..
  • Effective way to avoid the hot air gap between the outlet steel pipe to drain from the air nozzle with hot air gun..
  • Package included: 1x Triangle Welding Nozzle, 1x Round Welding Nozzle, 1x Welding fixed tacking nozzle. (Welding fixed nozzle: Used for fixing before welding.).
Check Stock

G830 2.0 Gelcoat Spray Gun

  • 【COMPOSITION STRUCTURE】1 x Spray Gun (gun trigger, air flow control valve, housing, spring hook).
  • 1 x 4mm Spray Nozzle FN5 5/32" (with sealing ring).
  • 2 x 1000ml Plastic Cup (with metal cup cover).
  • 【MAIN PARAMETERS】Air source pressure: 0.3-0.6Mpa, Cup volume: 1L, Measuring Cup: 500ml, Spray Nozzle: (4mm) FN5 5/32", Nozzle outer diameter: 5.0, Nozzle inner diameter: 3.0, Package size: 23cm x 23cm x 17cm (9'' x 9'' x 6''), Shipping weight: 1.4kg/3lbs..
  • 【OPERATION METHOD】According to the viscosity of the gel coat, choose the nozzle with the right diameter. In the nozzle and jet, the gun and the gun body and the lid and the material apply grease to the joints such as the cup. Then cover the cup on the cup filled with the material and press the lid.
  • Force the nozzleinto the air vent in front of the gun until the nozzle shows the air vent.
  • Hold thehandle and hold the gun. The air is ejected from the air jet..
  • 【WIDE APPLICATION】This gun will spray faster than conventional HVLP guns and will clean up in just a few minutes.This gun is used for spraying not only gelcoat, but other materials such as parting films, spray gypsum, tooling gelcoats, sandable primers, granite enhanced gelcoats, adhesives and paints..
Check Stock

WeldingCity 5-pk Gas Nozzle 169-715 169715 1/2

  • Premium gas nozzles (2-pk and 5-pk) for MIG welding gun in Miller Millermatic/MIGmatic and Hobart welders..
  • Gas nozzle 169715 (1/2" orifice, flush tip) for use with MIG welding gun M-10/M-15 (M-100/M-150) in Millermatic 135, 140, 175, 180, 210, 211, Passport and Passport Plus. Also replacement for gas nozzle 770-404 for some Hobart MIG welding guns such as H-9/H-10..
  • Gas nozzle 16972X and 200258 for use with MIG welding gun 150A - 400A M-25/M-40 series in Millermatic welders. 1/2" and 5/8" orifice.
  • tip-nozzle relationship recessed/flush/stick-out as per illustrated nozzle length for various part numbers..
  • Refer to your MIG welding gun user manual for selection of correct gas nozzle. Package of 2-pk and 5-pk. Volume discount available. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

TERA PUMP Next Gen Rain-Proof Gas Fuel Pump with 4.25-ft Long Discharge hose, Battery Electric Siphon Pump with Auto Stop System for Car Trucks Fuel Cells Tractor Generators Snow blower

  • [ TRANSFER RATES ] Transfers up to 2.3 Gallons per Minute with Auto-Stop Nozzle - Patented No Leak Design with Built-in Auto-Stop Nozzle stops pump automatically when container is full without the need to press the off button preventing any Overflow. Nozzle is is equipped with a locking clip to secure nozzle onto receiving receptacles for a hands-free experience.
  • [ RECOMMENDED ] Suitable for Gasoline, diesel, kerosene, light oils & non-potable water- XL Discharge Hose of 51-inch ( 4.25ft ) for refueling for farther distances, refuel Racing Car's Fuel Cell with ease - Discharge Hose Holder: Built-in nozzle holder for safe and convenient way of storing the discharge nozzle | Four (4) Gas Can Adapters included: One (1) for Racing Cans & Three (3) Others fits most North American gas cans.
  • [ FLEXIBLE SUCTION TUBE ] Suction Tube length of about 23-inch, Fits 3-Gallon (~11.4-Liters) Gas Cans, 5-Gallon (~19-Liters) Gas Can, Jerry Cans, Racing Cans and up to VIP Racing Cans - Suction end Outer Diameter: 1.2-inch - Back Saving: Lifting heavy gas cans will be a thing of the past.
  • [ BATTERY POWERED ] Powered with Four (AA)....
Check Stock

Backcountry Access BCA Float 2.0 Cylinder - Empty - One Size - One Color

  • ...lable Canister 】Higher quality material of aluminum and O-rings ensures durability. The thickness of canister is 0.06 inch (1.4mm), much thicker than old ones. **620c.c. (21 US fl. oz)** for easily carrying. Get rid of the one-time use spray bottles and protect our mother earth..
  • 【 New Design of Threaded Two-Way Nozzle 】Advanced Nozzle with *thread* for convenient replacement. Two purposes nozzle with jet straight stream for specific spots and with wide mist spray for wide range area. Easily switch the adjustable nozzle from stream setting to spray setting. **With 1pcs Two-way nozzle**.
  • 【 Universal Air Valve Stem/ Must Keep Refilling Pressure for Use】Refill pressure with a universal valve stem for easier to stuff air pressure. It can be refilled pneumatically with an air compressor or manually with a foot pump. Also equipped with the safety valve **Preset 140 Psi (9.65 Bar)**, the excessive pressure will be released automatically when stuffing..
  • 【 100% Genuine Guarantee 】Please identify FIRSTINFO Pneumatic Refillable Spray Can that has the patent authentication. (Patent Number: US- USD940824S DE. TW) We provide you quality assurance tools with 12+10 months after-sales warranty (10 months warranty by register) support. Help you to achi....
Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock

1/4''1/2''3/4''1''3/2''2''Brass Column Garden Pond Water Fountain Nozzle Sprinkle Spray Head(3/4\)

  • Fountain Decor: Fireworks nozzle augments its spout effect by adding water volume from the pool. In this way, a powerful effect is achieved with little alteration..
  • Brass Material: The nozzle is made of quality brass material, sturdy and beautiful brass golden color, high-grade looking..
  • Beautiful Effect: The fountain nozzle can make water shape to be beautiful, which is suit for decorating home courtyard, garden water pond, park fountain, hotel fountain..
  • Easy Use: The fountain nozzle is easy to install, it only requires PVC tubing and a submergible water pump, and different sizes for your different occasional fountain decoration or demands..
  • Porous Scattering: The fountain nozzle is for porous scattering, and center of the water column and nozzle spraying formed two layers outward radiation parabolic spray..
Check Stock