Reviews51threaded Tank

Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP

...g process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
classAcustoms 12 VOLT Fresh Water Pump MODEL # 12V3 - FRESH WATER USE ONLY - OPEN FLOW 11.6LPM / 3.0GPM AMPS 4.0A MAX AMPS 8.0A SHUT OFF PRESSURE 45PSI/3.1 Bar ON-DEMAND PUMP only turns on when senses pressure changes in line 12 VOLT POWER ONLY 110/115/220 volt will damage the unit - READ ....

Check Stock

Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP

...g process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
classAcustoms 12 VOLT Fresh Water Pump MODEL # 12V3 - FRESH WATER USE ONLY - OPEN FLOW 11.6LPM / 3.0GPM AMPS 4.0A MAX AMPS 8.0A SHUT OFF PRESSURE 45PSI/3.1 Bar ON-DEMAND PUMP only turns on when senses pressure changes in line 12 VOLT POWER ONLY 110/115/220 volt will damage the unit - READ....

Check Stock

HGC Moped Gas Fuel Tank Petcock For 49cc 66cc 50cc 80cc Motorized Bicycle Quality

For 49cc 66cc 50cc 80cc Motorized Bicycle.
This product is only suitable for our externally threaded tanks. Please check if your fuel tank is an externally threaded tank before placing an....
Externally threaded tank & this petcock makes it easier and faster to replace the old petcock..
Safe transportation with reliable package, deserving your trust..

Check Stock

1 TU58 Thread Measuring Gauge, Vertical Bolt and Nut Gauge / Thread Checker (Inch & Metric)

【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.

Check Stock

Mimgo Store Digital LED Ohm Meter Resistance Reader Voltage Tester Coil Vape Tester For RBA RDA Atomizer

Acrylic 510 screw thread RDA tank stand display , thick material and durable ..
there are 19pcs 510 screw thread for RDA tank , round stand base ..
the 19 holes are with 510 thread screw , it suits any tank ..
screw the 510 RDA tank on the stand . it will not fall off , keep your tanks all standing in order . NOT in a mess ..

Check Stock

Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000

TANK BUILT-IN TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..

Check Stock

DT-DIATOOL Diamond Core Drill Bits Kit for Porcelain Tile Ceramic Marble Granite Concrete Hole Saw (19/28/35/45/51mm) + Finger Bits (20mm) + 2 Adapters

【Specification】Totally 8pcs/box: 5pcs(19/28/35/45/51mm) drill bits + 1pc 20mm finger bit + 1pc hex shank adapter + 1pc M14 to 5/8"-11 adapter..
Drill bits: Diameter 19mm-51mm, 5/8-11 thread, total length 75mm(3 Inch).
Finger bit: Diameter 20mm, 5/8-11 thread, total length: 65mm. Workable length 50MM, Grit #50/60..
Hex adapter: 5/8"-11 male thread, 3/8" hexagon shank.
M14 adapter: 5/8-11 male thread to M14 female thread.
【Application】Drills Bits for dry or wet drilling holes.
Finger Bits for grinding,enlarging or shaping holes on porcelain ceramic tiles, granite, masonry,marble,concrete,etc. Adapters change 5/8 Inch-11 thread to 3/8-Inch hexagon shank or M14 thread and allow your bits to fit a wider range of machines..

Check Stock

Non Regulated 5/8-18UNF pcp Charging System Paintball Fill Station Paintball pcp air Gun Charging Valve Dual Gauge up to 4500psi with 20' high Pressure Hose

Dual gauge design:one gauge indicate tank pressure,the other gauge indicate the inline pressure.
Max working pressure:4500psi with 6000psi burst disc,.
Application:assembled in carbon fiber tank,suitable for pcp air gun or paintball tank refilling.
Thread:5/8-18UNF thread,always check your tank thread before purchasingif you do not know,please contact us.
It is not a regulator,it is pcp air gun or paintball tank fill station.

Check Stock

RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper

...g process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
classAcustoms 12 VOLT Fresh Water Pump MODEL # 12V3 - FRESH WATER USE ONLY - OPEN FLOW 11.6LPM / 3.0GPM AMPS 4.0A MAX AMPS 8.0A SHUT OFF PRESSURE 45PSI/3.1 Bar ON-DEMAND PUMP only turns on when senses pressure changes in line 12 VOLT POWER ONLY 110/115/220 volt will damage the unit - READ ....

Check Stock

MCAMPAS 350PSI Soft Nose P.O.L valve with 12 Feet Propane Weed Burner Torch Hose Adapter for Use Connects to U.S.Any Standard Propane Tank to Propane Weed Burner Torch Head Burner

➤Suitable use fit American standard 5lb-100lb PPOL valve regulator propane tank, Converts POL LPG propane tank service valve connects to propane weed burner.
➤12 Feet 350 psi high pressure propane hose can extend enough propane tanks to connect to propane torch weed burner to safely use the space.
➤Propane weed burner torch hose adapter outlet joint is 5/8” parallel pipe thread Joint （3/8"-19 Left Hand Internal Thread.)compatible with standard propane torch gas burners whose inlet thread diameter is 5/8" adapter.
➤The POL lp tank service valve propane hose adapter has passed CSA certification and has an internal overcurrent protection mechanism to prevent leakage. POL safety valve with handle (loose by turning right, tight by turning left) connects to any standard propane tank has lp tank POL service valve.
➤It replaces the problematic propane hose adapter on the propane weed torch. NOTE:, before purchasing, please check whether the propane weed torch air inlet connector is compatible with the 3/8"-19 internal thread left-handed or joint thread diameter is 5/8" joint.

Check Stock

HUIZHU Wo-od Stand Base Holder for 510 Thread Tank 510 thread screw for 510 Thread carts 510 thread cartridge 154MM * 154MM *13MM

Woo-d 510 screw thread RDA tank stand display , thick material and durable . 154mm x 154mm x 13mm.
there are 19pcs 510 screw thread for RDA tank , round stand base ..
the 19 holes are with 510 thread screw , it suits any tank ..
screw the 510 RDA tank on the stand . it will not fall off , keep your tanks all standing in order . NOT in a mess ..

Check Stock