Reviews5v A Power Supply

AITRIP 2PCS Type-C USB CH340 5V 16MHz for Nano Board CH340/ATmega+328P , Type-C Connection Compatible with Arduino Nano V3.0

  • The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • Support for external 5V~12V DC power supply, Support power supply by 9V battery..
  • The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
  • The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
  • Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed..
Check Stock

Module,Development Board Module Kit,5~26V SIM Development Module,Fit for SIM900 850/900/1800/1900 MHz GPRS/GSM,Quad-Band 850/900/ 1800/1900 MHz - Would Work on GSM Networks

  • Computer debugging USB--TTL. This module is powered by: 5V-26V, 5V 2A power supply is recommended. After plugging in the motherboard, the power supply must be able to supply 2A. The reason is that the GPRS Shield startup current and the maximum top current required to work up to 2A, but the USB port can not provide such a large current, so the external power supply equipment must be provided..
  • The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers.Speaker and Headphone jacks..
  • The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default).Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
  • GPRS multi-slot class 10/8.GPRS mobile station class B. Compliant to GSM phase 2/2+. Class 4 (2 W @ 850 / 900 MHz).Class 1 (1 W @ 1800 / 1900MHz).Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands..
  • Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).Embedded TCP/UDP stack - allows you to upload data t....
Check Stock

Upbright 48v Power Supply, 48v Power Adapter Compatible with Cisco Phone Models 8811, 8841, 8851, 8861, 8961, 9951.

  • AC Adapter Power Supply for 5V VOIP Phones, for Yealink Yea-ps5v2000u/ Yealink PS5V600US/ Yealink t42s/ Yealink PS5V1200US IP Phone Power Supply.
Check Stock

UpBright 5V AC/DC Adapter Compatible with Philips Hue 2.0 2.1 Zigbee IP Bridge 3241312018A Anatel 1st 2nd 3rd Gen Generation Wireless Lighting WiFi LED CE0979 458471 464479 S005BMM0500100 Power Supply

  • World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection). Tested Units. In Great Working Condition. UpBright 30 days money back guarantee. 1 full year service warranty..
  • UpBright New Global 5V AC / DC Adapter Compatible with Philips Hue 2.0 Hue 2.1 Zigbee IP Bridge Hub Anatel 1st 2nd 3rd Gen 1 / 2 / 3 Generation Personal Wireless Lighting Wi-Fi LED CE0979 458471 464479 5VDC 1000mA DC5V 1A 5.0V 1.0A 5W Switching Power Supply Cord Cable PS Wall Home Battery Charger Mains PSU.
  • Compatible with: Philips Hue 2.1 Hue2.1 Model: 3241312018A Hue Bridge - 3W DC 5V/1A 5VDC1A 5V DC 1A Power Supply.
  • Philips Hue IP Model: Zigbee IP Bridge Hub Zig Bee IP Bridge CE0979 5 V 600mA 5 VDC 0.6A Class 2 Power Supply.
  • Compatible with: Philips Model: S005BMM0500100 5.0V 1.0A 5W Switching I.T.E. Power Supply.
  • (⚠️Output: ✅ 5V. NOT for 24V ❌ version. NOT for 12V ❌ version. NOT for Philips Hue Go ❌. NOT for Hue Play ❌. NOT for Hue Lightstrip ❌. Someone may have bought it by mistake. Please Check For Compatibility With Your Unit. Thanks.).
Check Stock

MyVolts 5V USB Power Cable Compatible with/Replacement for Fuhu NAB12-NV7A Android Tablet

  • This myVolts 5V high-quality power cable is compatible with your Fuhu NAB12-NV7A, allowing you to power it from any USB port..
  • Package Includes - 2 metre 5V USB power supply cable,.
  • Lifetime warranty - this myVolts power supply comes with a warranty covering up to the lifetime of your device, or 10 years - whichever is greater.Energy efficient - this power supply guarantees more efficient delivery of power to your devices, at less cost to you..
Check Stock

MyVolts 5V USB Power Cable Replacement for Pioneer BDR-XD05S External Blu Ray Writer

  • This myVolts 5V high-quality power cable is compatible with your Pioneer BDR-XD05S from any USB port.
  • Package Includes - 2 metre 5V USB power supply cable,.
  • Lifetime warranty - this myVolts power supply comes with a warranty covering up to the lifetime of your device, or 10 years - whichever is greater.Energy efficient - this power supply guarantees more efficient delivery of power to your devices, at less cost to you..
Check Stock

7.83HZ Pulse Generator 5V 0.1A Schumann Wave Ultra-low Frequency Audio Resonator for Helping Sleep

  • ✔ MINI USB PORT POWER SUPPLY -- Adopted of Mini Usb port power supply, typically+5V 0.1A,and comes with USB cable.
  • ✔ LOW STATIC CONSUMPTION -- Imported ultra-low static power consumption main control IC,to make the waveform more stable.
  • ✔ 7.83HZ PULSE SQUARE WAVE -- Output 7.83HZ pulse square wave, whose duty cycle is 50%. Frequency can be fine-tuned for correction.
  • ✔ ULTRA-LOW SCHUMANN WAVE -- This product is Schumann wave 7.83HZ very low frequency generator, features high accuracy and stability.
Check Stock

AC/DC Adapter Compatible with Black & Decker Scum Buster ScumBuster S600 S600B S700 S700E S500 3.6V Power Scrubber 90500912 UD-0401E 598322-00 UD-0401D UA0402 5102970-03 4.35V 4.5V 5V Charger

  • ...er Compatible with Black & Decker Scum Buster ScumBuster Xtreme Model: S600, S600B, S700, S700E E700 700E 3.6V DC 3.6 Volt Rechargeable Battery Cordless Power Scrubber Wet Cleaning Tool UD-0401D 598322-00 B&D BD Black&Decker Black and Decker 4.35VDC 130mA 4.35V DC 130 mA 4.35 VDC 0.13A - 1A 4.35V - 5V Class 2 Power Supply Cord Cable PS Wall Home Battery Charger Mains PSU.
  • Compatible with: Black & Decker P/N: 90500912 Model No.: UD-0401E (598322-00) UD0401E 598322-00 59832200 P/N: 598322-00 UD-0401D UD0401D UD-04010 4.35V DC 130mA 4.35VDC 130 mA DC4.35V 4.35V - 5V Class 2 Power Supply.
  • Black & Decker Model No.: UA-0402 UA0402 P/N: 5102970-03 510297003 4.5V 200mA 4.5VDC 0.2A DC4.5V 4.5 V - 5V Class 2 Power Supply.
  • Black & Decker Scum Buster Scumbuster S500 Cordless Power Scrubber 3.6 Volts Rechargeable Battery Power Supply Charger.
  • (Note: 3.6V is ScumBuster's battery voltage. NOT charger's voltage. The charger's voltage is 4V-5V. Please Check For Compatibility With Your Unit. Thanks.).
Check Stock

UpBright AC/DC Adapter Compatible with Black & Decker Scum Buster ScumBuster S600 S600B S700 S700E S500 3.6V Power Scrubber 90500912 UD-0401E 598322-00 UD-0401D UA0402 5102970-03 4.35V 4.5V 5V Charger

  • ...er Compatible with Black & Decker Scum Buster ScumBuster Xtreme Model: S600, S600B, S700, S700E E700 700E 3.6V DC 3.6 Volt Rechargeable Battery Cordless Power Scrubber Wet Cleaning Tool UD-0401D 598322-00 B&D BD Black&Decker Black and Decker 4.35VDC 130mA 4.35V DC 130 mA 4.35 VDC 0.13A - 1A 4.35V - 5V Class 2 Power Supply Cord Cable PS Wall Home Battery Charger Mains PSU.
  • Compatible with: Black & Decker P/N: 90500912 Model No.: UD-0401E (598322-00) UD0401E 598322-00 59832200 P/N: 598322-00 UD-0401D UD0401D UD-04010 4.35V DC 130mA 4.35VDC 130 mA DC4.35V 4.35V - 5V Class 2 Power Supply.
  • Black & Decker Model No.: UA-0402 UA0402 P/N: 5102970-03 510297003 4.5V 200mA 4.5VDC 0.2A DC4.5V 4.5 V - 5V Class 2 Power Supply.
  • Black & Decker Scum Buster Scumbuster S500 Cordless Power Scrubber 3.6 Volts Rechargeable Battery Power Supply Charger.
  • (Note: 3.6V is ScumBuster's battery voltage. NOT charger's voltage. The charger's voltage is 4V-5V. Please Check For Compatibility With Your Unit. Thanks.).
Check Stock

NICE-POWER DC Power Supply Variable: 30V 10A Adjustable Switching Regulated High Precision 4-Digits LED Display 5V/2A USB Port Output & Input Power Cord Bench Lab Power Supplies

  • 【High Precision, Low Ripple, LED Display, Auto Switch C.C/C.V Mode】NICE-POWER 30V 10A DC power supply is a professional power supply regulator with high accuracy of 0.01V and 0.001A, low ripple of DC power supply. The backlit 4-digit LED display has the advantage of high resolution, which can be easily viewed even if you are in low-light conditions . Adjustable power supply has C.V/C.C indicator light, constant voltage and constant current mode can automatically complete the switch..
  • 【CE & FCC Certification, Multiple Protection, Various Application】Lab power supplies have passed CE & FCC Certification. 30V DC power supply has multiple protections: Overvoltage protection, Overcurrent protection, Overheating protection, Over power protection, Short circuit protection, Leakage Protection. DC power supply is suitable for laboratories, schools, electronic maintenance , Electrolysis, electroplating, lamp test, aging test, home DIY, scientific research and teaching, etc..
  • 【Front Power Switch , Stable Horizontal Design, Lightweight and Portable】The front power switch is very convenient. Bench power supply adopts Stable Horizontal Design, DC power supply has Shock Absorber Rubber Feet at the bottom, so it will be safer and more stable during use. DC....
Check Stock

NICE-POWER DC Power Supply Variable: 30V 10A Adjustable Switching Regulated High Precision 4-Digits LED Display 5V/2A USB Port Test Lead Output & Input Power Cord Bench Lab Power Supplies

  • 【High Precision, Low Ripple, LED Display, Auto Switch C.C/C.V Mode】NICE-POWER 30V 10A DC power supply is a professional power supply regulator with high accuracy of 0.01V and 0.001A, low ripple of DC power supply. The backlit 4-digits LED display has the advantage of high resolution, which can be easily viewed even if you are in low-light conditions . Adjustable power supply has C.V/C.C indicator, constant voltage and constant current mode can automatically complete the switch..
  • 【CE & FCC Certification, Multiple Protection, Various Application】Lab power supplies have passed CE & FCC Certification. 30V DC power supply has multiple protections: overvoltage protection, overcurrent protection, overheating protection, over power protection, short circuit protection, leakage protection. DC power supply is suitable for LiFePO4 battery charging, arduino project, anodizing, laboratories, schools, electronic maintenance , electrolysis, electroplating, lamp test, DIY, etc..
  • 【Stable Vertical Design, Lightweight and Portable】Bench power supply adopts stable vertical design, DC power supply has shock absorber rubber feet at the bottom, so it will be safer and more stable during use. DC power supply is very light and portable, with a size of only 3.3 x 9.....
Check Stock