Reviews6 Hybrid Stepper Motor

3Pcs Nema23 Stepper Motor Mount 57 Stepping Motor Mounts Mounting Base Plastic Bracket Clamp Support Holder Fixed Seat for CNC Router Milling Engraving Machine DIY Acessories

  • 【Usage】for Nema23 Stepper Motor Bracket/57 stepper motor.
  • 【size】 57*57*40cm【Material】Plastic.
  • 【Package Includes】3pcs 57 Stepper Motor Mounting Bracket.
  • 【Precise Hold-cutting】This motor mount bracket owns convenient mounting holes. These holes is cut by puncher, perfect matched with the 57 stepper motor..
Check Stock

Befenybay 50mm Effective Travel Length Mini Linear Rail Guide Lead Screw T6x1 with NEMA11 Stepper Motor for DIY CNC Router Parts X Y Z Linear Stage Actuator

  • DURABLE: The slide screw stepper motor made of high quality meterial, strong and durable in use, working voltage DC 9-12V..
  • MAXIMUM LINEAR SPEED: The maximum linear speed of lead screw worm drive stepper motor is 25mm per second..
  • APPLICATION: The DC 12V stepper motor widely used for small devices such as medical equipment, laser engraving machine, etc..
  • PRODUCT PARAMETER: The linear screw stepper motor moves 0.25mm for one step, can use microstep driver if need smaller..
  • NOTE: The stepper motor need a A4988 driver(not included) to drive, can not directly connect to power..
Check Stock

Dr.Roc Compatible Instrument Cluster Gauge Stepper Motor Repair Kit Fits X27 168 03 to 06 with 6 Stepper Motors Soldering Iron Solder Sucker Chevy Silverado GM GMC

  • The latest generation,Premium stepper motors,quiet operation and reliability,Perfectly Replace for the older and faulty XC5-168(XC5168), X15-168(X15168) ,X25-168(X25168) and X27-168(X27168,X27.168,X27 168) stepper motors that came in your vehicles,Use the tool on the upper left corner to check whether this product fits your vehicles.
  • Used for repairing guage cluster,including speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge.
  • Solve the common problems of your vehicle such as, gauges cluster dead,chatter,sticking,false/jumpy/inaccurate readings,pegged out to the left or right of the dial, ratchet up or down,sticky needle movement,erratic gauge movement etc.
  • Each gauge of your instrument cluster need one stepper motor.Since one stepper motor went out,and it will result all other stepper motors go out soon. Checking the quantity of stepper motors for your vehicle to decide to buy the 6 or 8 one..
  • The premium instrument cluster repair kit is compatible with XC5-168 (XC5168), X15-168 (X15168) ,X25-168 (X25168) and X27-168 (X27168,X27.168,X27 168) stepper motors.Regarding to the fitment,please kindly input your make, model and trim level into the Amazon Garage which is on the ....
Check Stock

Dr.Speedometer GM Stepper Motor Repair Kit X27 168 - (7 Motor Kit) Fits All 03-06 Chevy Silverados, Tahoes, Yukons, Suburbans +

  • #1 RATED GM STEPPER MOTOR REPAIR KIT - Set of 6 Genuine Switec OEM GM Stepper Motors, part number x27.168 (not aftermarket black type). Most GM's have six gauges and you'll need one motor for each gauge in your instrument cluster to complete the job. While you're in there you may as well replace all the stepper motors because they're all guaranteed to go out eventually. Once one goes out it's not long before the rest go too!.
  • COMPLETE KIT - Includes 7 motors, correct solder, OEM lights and needle removal tool. Fits ALL 2003, 2004, 2005 and 2006 Chevrolet GMC Silverados, Suburbans, Tahoes, Trailblazers, Yukons and many more listed below.
  • WHY BUY AFTERMARKET PARTS when you can get these genuine OEM (Original Equipment Manufacturer) GM stepper motors right here on Amazon? These are the very latest revised and updated GM factory stepper motors specifically designed to be a 100% cure for the common problems seen 2003-2006 General Motors vehicles such as: sticky needle movement, jumpy readings, dead gauges, gauges that ratchet up or down, gauges pegged out to the left or right of the dial and more..
  • OEM PARTS - Produced for General Motors in Switzerland by Juken Swiss Technologies these Switec GM stepper motors are of the utmost quality and meet stringen....
Check Stock

Stepper Motor HAT Drives Two Stepper Motors Up to 1/32 Microstepping for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B for Use 3D Printer etc @XYGStudy

  • This Stepper Motor HAT gives your Raspberry Pi the ability to drives two stepper motors at the same time, supports up to 1/32 microstepping..
  • Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later versions, Jetson Nano.
  • 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
  • Applications: 3D Printer, Sculpturing machine, Mechanical arm.
Check Stock

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

  • 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface could be connected with Driver Board easily.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
  • Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check Stock

Nema23 57 Stepper Motor Mount bracket Support Clamp Aluminium Alloy Mounting Holder for CNC Router Milling Engraving Machine

Check Stock

MybotOnline 5 Sets Stepper Motor 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board

  • Stepper motor with a standard interface, motor diameter: 1.1", wire length: 9.05".
  • A, B, C, D four-phase LED indicates the status of stepper motor work.
  • Compatible with ArduinoIDE UNOR3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Gift: 1x 10-pin male to female multicolor breadboard jumper wires,each cable length: 7.87"(20 cm).
  • Packing in a box: 5 sets Uln2003 stepper motor + driver board + 10 pin jumper wire.
Check Stock

diymore 5-Set DC12V 28BYJ-48 Stepper Motor with ULN2003 Drive Boards Blue(12V)

  • Stepper motor driver board with ULN2003..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
Check Stock

Protech 51-102500-01 1/2 hp 120/1/60 Blower Motor

  • HIGH TORQUE: Adopting high quality motor steel material, DROK 3d printer stepper motor kit is provided with high torque (0.46 Nm/ 65 oz-in), low self-inductance reactance, responsive and can avoid system error..
  • LOW NOISE: The internal rotor of our anet anet a8 stepper motor kit is made with introduced German craftsmanship and there is rotor rubber covering the rotor, effectively reduce the noise..
  • DURABLE & TOUGH: Our mini motor uses high hardness metal, tough and durable. And the matte texture in the side wall can increase friction..
  • WIDE APPLICATION: This small motors can be used in various area, such as stage lighting.
  • WHAT YOU GET: The package includes 1* 42 Stepper Motor..
Check Stock

STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for Nema 17 and 23 Stepper Motor

  • Stepper motor driver DM542T is updated to version V4.0, add 5V/24V logical voltage selector, alarm outputs..
  • Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor.
  • 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution.
  • Pulse signal: 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals.
  • 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing..
Check Stock