Reviews6 In 1 Meter

Horiba 9096001700 Plastic Body PH Electrode

  • Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
  • This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
  • Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
  • 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
  • The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..
Check Stock

Ketone Breath Analyzer Professional Breath Ketosis Meter Portable Digital Ketone Meter Tracing Ketosis Status

  • This ketosis Breath meter is an easy-using and self-monitoring device for individuals following on a keto life. Breath ketosis meter saves you from finger pricks, and the device can be used repeatedly by replacing the mouthpiece, which saves your money for testing from continiously buying strips, also more convenient because you only need to breathe with the monitor for 5 seconds.
  • Breath ketone meter measures 6 levels of ketones up to 99 PPM (0.0 -99), using a PPM (Part Per Million) measurement. 4 LCD Display colors for indications: 0.0-1.9 reading with WHITE light, 2.0-39 readings with GREEN, 40-59 readings with YELLOW and over 60 readings with RED light. This ketone analyzer is with 32 memory records for ketosis records tracking, and this device is powered by 2*AAA batteries (not included but commonly available).
  • The ketone breath analyzer to be exhausted before your first use. To do this, turn on the Keto Breath Meter, wait for the 15 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow for 5-6 seconds immediately once “START” showing then Ketone Breath analyzer will start analyzing your breath, the result readings will be visi....
Check Stock

DollaTek 5Pcs SW-420 NC Type Vibration Sensor Module Vibration Switch

  • Shipping list: 1 channel 24V vibration sensor plus relay module with 1 meter long shock sensor.
  • 6-24V wide voltage power supply stable version With 1 meter long vibration sensor module, this module has no vibration delay function..
Check Stock

LED Magnetic Field Detector Ghost Hunting Paranormal Equipment Tester Portable Counter (Black, 1 PC)

  • ✅ BLOCKS SMART METER EMF RADIATION - The Smart Meter Cloak uses faraday technology to block RF (radio frequency) emsissions, specifically harmful EMF (electromagnetic field) radiation, coming from electricity meters referred to as smart meters. Placing the Smart Meter Cloak over a smart meter absorbs the EMF waves and prevents the emissions from going inside your house, office, or building..
  • ✅ INNOVATIVE DESIGN + HIGH-QUALITY STAINLESS STEEL FRAME & LID - Constructed with a high-grade double layer of 1/6" stainless steel mesh welded to a reinforced stainless steel frame, offering extreme support and shielding abilities. Stainless steel lid has two latches and faraday compression gaskets for a tight and secure RF shielding seal. When needed, a technician can open the lid and view the smart meter screen through the top layer mesh, so the Smart Meter Cloak never needs to be removed..
  • ✅ UNIVERSAL SIZE - Fits all round smart meters in the United States and Canada. The design allows for modifications to be made, should there be elements protruding on your smart meter rim, or if a tighter fit is required. The kit includes weather-proof foam strips in two sizes that can be used to line the rim of the Smart Meter Cloak, to accommodate various size meters.....
Check Stock

Ketone Breath Meter Ketosis Breath Analyzer Portable Ketone Meter for Ketosis Testing

  • This ketosis breath meter is an easy-using and self-monitoring device for individuals following on a keto life. Ketone breath meter saves you from finger pricks, and the device can be used repeatedly by replacing the mouthpiece, which saves your money for testing from continiously buying strips, also more convenient because you only need to breathe with the monitor for 5 seconds.
  • The ketone breath meter needs to be exhausted before your first use. To do this, turn on the Keto Breath Meter, wait for the 15 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow for 5-6 seconds immediately once "START" showing then Ketone Breath analyzer will start analyzing your breath, the result readings will be visible for 10 seconds.
  • Breath ketone meter detects your breath acetone from 0 to 99 PPM and follow 6 level guidance: 0.0-1.9ppm (No ketosis), 2.0-3.9ppm (Early Stage Ketosis), 4.0-9.9ppm (Light Ketosis), 10-39ppm (Stable Fat Burning Zone), 40-59ppm (Caution-High Ketosis), 60-99ppm (Ketoacidosis).
  • Tracking breath acetone is a better measure of what your body is actually using for fuel because acetone in our breath is an actual byproduct of fat b....
Check Stock

DHDZVOV Water Tester for Plants Soil Moisture Meter,3-in-1 Soil pH Moisture Light Intensity Meter Soil Sensor Kits,Soil pH Meter for Garden,Farm,Lawn,Indoor & Outdoor Plants Growth (Soil Meter Kit)

  • 3-in-1 Soil moisture meter helps determine water and PH levels in soil,Soil meter helps determine if your plant is receiving adequate sunlight.
  • Environmentally friendly design works without batteries or charging the soil moisture tester.
  • Easy to use the soil pH meter, simply place prongs in soil, switch button to desired function,and check reading.
  • Soil tester moisture range: 1-10( 1-3 dry, 4-7 neutral, 8-10 wet),pH range: 3.5-8( 3.5-6.5 acidic,7 neutral,7-8 alkaline),light intensity range:0-2000lux(0-200 Lower,200-500 low,500 -1000 neutral,1000-2000 high).
  • Take the guesswork out of caring for your plants and try our 3-in-1 Plant Soil Moisture Meter today.
Check Stock

Keto Breath Meter Digital Ketosis Breath Analyzer Monitors The Acetone and Ketones in Breath with 10Pcs Replaceable Mouthpieces

  • The ketone breath analyzer needs to be exhausted before your first use. To do this, turn on the Keto Breath Meter, wait for the 15 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow for 5-6 seconds immediately once "START" showing then Ketone Breath analyzer will start analyzing your breath, the result readings will be visible for 10 seconds.
  • Breath kteosis meter measures 6 levels of ketones up to 99 PPM (0.0 -99), using a PPM (Part Per Million) measurement. 4 LCD Display colors for indications: 0.0-1.9 reading with WHITE light, 2.0-39 readings with GREEN, 40-59 readings with YELLOW and over 60 readings with RED light. This ketone analyzer is with 32 memory records for ketosis records tracking, and this device is powered by 2*AAA batteries (not included but commonly available).
  • Breath ketone meter detects your breath acetone from 0 to 99 PPM and follow 6 level guidance: 0.0-1.9ppm (No ketosis), 2.0-3.9ppm (Early Stage Ketosis), 4.0-9.9ppm (Light Ketosis), 10-39ppm (Stable Fat Burning Zone), 40-59ppm (Caution-High Ketosis), 60-99ppm (Ketoacidosis).
  • Tracking breath acetone is a better measure of what your body is actually using for fu....
Check Stock

A Tiny Book: Progressive Overload

  • This ketone breath meter is an easy-using and self-monitoring device for individuals following on a keto life. Breath ketosis meter saves you from finger pricks, and the device can be used repeatedly by replacing the mouthpiece, which saves your money for testing from continiously buying strips, also more convenient because you only need to breathe with the monitor for 5 seconds.
  • Breath acetone meter measures 6 levels of ketones up to 99 PPM (0.0 -99), using a PPM (Part Per Million) measurement. 4 LCD Display colors for indications: 0.0-1.9 reading with WHITE light, 2.0-39 readings with GREEN, 40-59 readings with YELLOW and over 60 readings with RED light. This ketone analyzer is with 32 memory records for ketosis records tracking, and this device is powered by 2*AAA batteries (not included but commonly available).
  • Breath ketone meter detects your breath acetone from 0 to 99 PPM and follow 6 level guidance: 0.0-1.9ppm (No ketosis), 2.0-3.9ppm (Early Stage Ketosis), 4.0-9.9ppm (Light Ketosis), 10-39ppm (Stable Fat Burning Zone), 40-59ppm (Caution-High Ketosis), 60-99ppm (Ketoacidosis).
  • Tracking breath acetone is a better measure of what your body is actually using for fuel because acetone in our breath is an actual byproduct of fat burning, and 80% of f....
Check Stock

Breath Ketosis Tester Portable Ketone Breath Analyzer Professional Grade Accuracy Ketosis Breath Meter for Track Your Ketones

  • The breath ketone meter is a portable device used to measure the levels of ketones in the breath. This non-invasive device uses advanced sensor technology to detect the concentration of acetone in the breath, which is a reliable indicator of the body's ketone levels..
  • Ketone breath tester measures 6 levels of ketones up to 99 PPM (0.0 -99), using a PPM (Part Per Million) measurement. Ketone breath meter with 3 LED indications: Green Light (Ketosis Reading Successfully), Amber Light (Low Battery), Red Light (Ketosis Reading Unsuccessfully).
  • the keto tester device powered by 2*AA batteries (not included but commonly available)..
  • The ketone monitor needs to be exhausted before your first use. To do this, turn on the keto breath meter, wait for the 20 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow immediately within first 5-6 seconds when displaying "blo" on the ketosis tester, since the breath acetone meter starts analyzing the breath right after the first 6 seconds.
Check Stock

Ketone Breath Analyzer with Upgraded Semi-Conductor Sensor -White

  • ... or eating foods 30minutes before taking the test for accurate results. In order to accurately analyze and track your testing readings, we strongly recommend testing your ketone levels under the same conditions each time right after waking up in the morning before consuming anything in fasting status!.
  • Breath ketone meter detects your breath acetone from 0 to 99 PPM and follow 6 level guidance: 0.0-1.9ppm (No ketosis), 2.0-3.9ppm (Early Stage Ketosis), 4.0-9.9ppm (Light Ketosis), 10-39ppm (Stable Fat Burning Zone), 40-59ppm (Caution-High Ketosis), 60-99ppm (Ketoacidosis).
  • Tracking breath acetone is a better measure of what your body is actually using for fuel because acetone in our breath is an actual byproduct of fat burning, and 80% of fat that we burn leaves the body through the lungs.
  • The ketone monitor needs to be exhausted before your first use. To do this, turn on the Keto Breath Meter, wait for the 15 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow for 5-6 seconds immediately once "START" showing then Ketone Breath analyzer will start analyzing your breath, the result readings will be visible for 10 seconds.
Check Stock

Wired in Ear Monitor System/IEM Personal Monitoring Headphone Amplifier with Mono & Stereo Panning, IEM-Stereo by Coda Music Technologies

  • Designed for studio, broadcast and mobile applications, and carefully crafted with key metal components for lasting durability. Magnet-Neodymium.
  • Uses the same large aperture drivers as ATH M50x headphones, delivering exceptional clarity, extended frequency range, and accurate bass response.
  • Low profile, closed back, on ear design provides excellent sound isolation and a great fit.
  • Memory foam ear pads and headband provide excellent comfort and durability.
  • Comes with 3 interchangeable cables (1.2 meter, 3.0 meter coiled, 3.0 meter straight, and 1.2 meter straight each with a 3.5 millimeter (1/8 inches) mini plug).
  • Also comes with a 6.3 millimeter (1/4 inches) screw on adapter and a protective carrying pouch.
Check Stock