Reviews70ton Capacity

Performance Tool 50-100 Dual Gear Power Puller - 2 Ton Capacity Winch With 6 aircraft cable

【Heavy Gauge Structural Steel】This engine hoist is made of heavy duty structural steel, durable and sturdy to keep its shape and also very safe when use. With the solid steel construction, it has 4000 lb closed boom capacity and 1000 lb extended boom capacity..
【Adjustable Positions and Easy Storage】There are 4 adjustable positions Compatiable With your different work needs: 0.5Ton ,1Ton ,1.5Ton and 2 Ton. Equipped with 8-ton ram hydraulic cylinder, it can be used Compatiable With long time. The foldable design is good if you are looking Compatiable With an easy cranes to store..
【360º Swiveling Wheels】There are six durable wheels on the lift, which can be rolled around and swung in any direction. It provides maximum maneuverability and it is a good choice Compatiable With moving heavy parts..
【Wide Application】This lift could lift almost any gas engine and some smaller diesel engines. Useful Compatiable With moving heavy parts such as axles, transmissions and transfer cases around the shop..

5 Ton Capacity, thats 10,000 Pounds! Minimum of 1-1/2" Reach-around for Flanges, Cowls, Pinch Welds, and Lips.
Self-tightening serrated jaws for a positive grip, self-tightening clamp grips tighter as it is pulled..
Standard 45# steel materal High frequency Electroplatingand various heat treatment processes..
Perfect to use in the confined space, Butts against panels where only narrow bite available..
Pulling Capacity: 5 Ton (straight way), 2 Ton (cross way),Drop forged construction provides more pulling power..

5 Ton Capacity, thats 10,000 Pounds! Minimum of 1-1/2" Reach-around for Flanges, Cowls, Pinch Welds, and Lips.
Self-tightening serrated jaws for a positive grip, self-tightening clamp grips tighter as it is pulled..
Standard 45# steel materal High frequency Electroplatingand various heat treatment processes..
Perfect to use in the confined space, Butts against panels where only narrow bite available..
Pulling Capacity: 5 Ton (straight way), 2 Ton (cross way),Drop forged construction provides more pulling power..

FOUR TON CAPACITY- Each turnplate supports up to 2 tons of weight capacity, allowing up to 4 tons of weight when used in pairs.
BRASS FINISH DIAL- The beautiful brass finish dial has readings up to 60 degrees left or right from centerline (rotation allows up to 360 degrees).
OFFSET SLIDE TOLERANCE- The 13-3/8" top rotating plates allows a 1" slide tolerance from centerline, allowing wheels that move when turning.
PERFECT FOR GARAGE OR PIT BOX- At 15.75" x 15.75" and 37lbs, the pair of alignment turn plates is perfect for any garage or auto shop.
BONUS ACCESSORIES- Each turn plate set comes with two (2) bonus small wheel chocks and two (2) bonus plastic turners.

Comformity - ANSI B30.16, AS1418.2, EN13157 Warranty - Three Years.
Test - Each piece pass proof load test at 150% of rated load..
Available in 3/4 Ton, 1.5 Ton and 3 Ton Capacity with 5ft, 10ft. and 20ft lift chain length.
Safety - All the hoist has a 4:1 safety factor PLI available.
Products liability insurance available for all the hoist.

RATED CAPACITY : The maximum load capacity of BEETRO car jack is up to 3 ton(6600 pounds), lifting height is 5.5 -16.54 inches. Two removable raised heads are respectively designed for vehicles of different heights, suitable for most vehicles under 3 ton, Sedan, SUV, MPV etc. NOTES: Never used the jack on sloped ground. Never use it on truck or over 3 ton vehicles. Start car engine before operation,ensure sufficient electricity..
TWO WAY POWER SUPPLY : This 12v jack is cigarette lighter or car battery powered, and comes with a 11.5 foot power cable, long enough to go through the 4 tires without changing the power source..
EASY TO USE : Electric scissor jack is simple to operate, just press 2 switches to lift or lower your car, get rid of laborious and tedious manual working. It just takes about 2 minutes to lift a car, greatly cut repairing time. Perfect for car's owners change tire in emergency, especially best choice for women..
HIGHER SECURITY: This 3 ton scissor jack adapts heavy-duty steel construction which features to strong bearing capacity and distortion resistance. It will automatically stop lifting when it r....

Rating Of Power Supply：AC110-120V/60Hz,With Earthed Jack,And Allowed Current Is Greater Than 5A.
Warm Up Time: 3 Minutes / Tank Capacity:350ml / Optiona Capacity:250ml / Rated Power:900-1050W.
Steam Pressure:3bar, Injected Steam Capacity:28g/Min, Functioning Temperature : 275°F / 135°C, Overall Dimension:11”×5.5”×8.3”(L×W×H), Power Cord Length:10Ft.
Max Pressure(Working Force): 6 Ton, Piston Stroke(Storke Length:)：22 Mm, Max Thickness For Steel: 3 Mm ( 11 Gauge ), Max Thickness For Stainless Steel: 2 Mm ( 14 Gauge ), Standard Hole Sizes: 22mm / 27.5mm /34mm / 43mm / 49mm / 60.8mm..
Package Include：1 X 6-Ton Pump, 6 X Dies & Punches, 2 X Draw Studs, 1 X Spacer, 1 X Yellow Plastic Carrying Case..

2.5 US TON Lift Capacity from the Toe, 5 Ton Lift Capacity at from the Top of the jack..
Lowest Minimum Jacking Clearance 0.7 Inch..
Machined Cylinder Housing improves the quality of the jack - Compare to traditional stamped sheet metal cylinder housing..
Over Travel Protection eliminates damage to internals from over-extension of piston..
Hard Chrome Ram resists corrosion and maximizes seal wear life. 5 Year Warranty..

Design: C-type head, easy to change mold and fixed line position Hydraulic.
Efficiency: Hydraulic crimping machine is much easier than hand crimping, higher efficiency, less strength.
Hydraulic Design: Provide 10 tons of maximum pressure relay hydraulic mechanism, can easily rotate crimp wire.
Safety: Quick release of on/off knob, when the pressure reaches the maximum pressure of the valve, automatic release to prevent overpressure.
Compatibility: 10 Ton hydraulic wire crimper features 9 sets of dies for providing large crimping range from 4 to 70 square millimeters, ideal for meeting your different crimping needs.