Reviews75mm Nozzle

Anet 3D Printer Extruders, 30PCS Hardened Steel and Brass MK8 Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Cleaning Tool Kit for CR-10/ Ender 3/5, Ender 3/ V2 Ender3 pro…

Premium Quality-MK8 nozzles are made of high-quality Hardened Steel and Brass. Heavy duty and provide a long service life.Easy to install and change.
Applicability-MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printers. Fit exactly like the original.
output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
Excellent Cleaning Needles-The nozzle cleaning needles are very flexible and robust, easy to bend the needle into the nozzle, and will not break. Perfect to handle tough extruder hot end nozzle clogs.
Package Include-Printer nozzles come with 30pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 12 x 0.4mm, 3 x 0.5mm, 3x 0.6mm, 3x 0.8mm, 3x 1.0mm,with 10PCS Cleaning Needles and 1 pcs Tweezers.

Check Stock

SUNLU PETG 3D Printer Filament, PETG Filament 1.75mm Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, PETG Blue

【8 Rolls of 0.25kg 1.75mm PLA Filament, Multiple Color Choices】8 rolls of 250g SUNLU 1.75mm PLA filament.Color:Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure+Yellow.The design of 250g PLA filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
【SUNLU Toughness-enhanced PLA Filament】 SUNLU premium PLA filament offer the advantage of incredible ease of 3d printing.SUNLU PLA filament,optimized print quality,high purity with low shrinkage and superb interlayer adhesion.Meet your needs for 3d printing projects on functional parts with higher toughness..
【High Precision +/- 0.02mm Tolerance PLA filament】: 1.75mm PLA 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PLA filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
【No Clogging, no Bubbles and Good Adhesion】Better flow of SUNLU no plugging premium 1.75mm PLA filament.It has consistent diameter & roundness,less stringing and warping,strong layer adhesion.Article-free and impurity-free.No impurities,no clogged.Recommended PLA Filament Extrusion/N....

Check Stock

MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle

100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..

Check Stock

Marble PETG Filament 1.75 mm 3D Printer Filament 1KG 2.2LBS Spool 3D Printing Filaments Print Materials Stronger Than Marble PLA Filament 1.75mm Rock White HZST3D

PETG Marble Color is a mixture of PETG and healthy safety marble elements, which produces natural marble effect..
Easy to print:Ultrafine particles, easy to melt and print, and will not cause blockage. Excellent print quality..
Precise dimension:1.75mm in diameter with tolerance +/-0.05mm..
Compatibility: 1.75mm diameter which is compatible with almost all kinds FDM 3D printer pen..
Please note that: Nozzle 003e0.4mm, it is recommended to use 0.6mm nozzle..

Check Stock

3D BEST Q Real Wood PLA 1.75mm 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1KG Spool, 30% Real Wood-infill (Rosewood)

Weight: 1 KG (approximately 2.20 lbs) Spool, 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 200°C - 215°C Base Plate/Print Bed Temperature:50°C.
Attention please: Clean the nozzle before printing OR just use a 0.5mm or above nozzle to avoid clog..

Check Stock

3D BEST Q Carbon Fiber Polycarbonate 1.75mm 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1KG Spool, Really Carbon Fiber-infill，Black

Weight: 1 KG (approximately 2.20 lbs) Spool, 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 240°C - 270°C Base Plate/Print Bed Temperature:90~110°C.
Attention please: Clean the nozzle before printing OR just use a 0.5mm or above nozzle to avoid clog..
The printed workpiece is frosted surface and almost impervious to light.

Check Stock

YingEnter Professional Plastic Hair Dryer Nozzle Diffuser Hair Dryer Nozzle Comb Attachment Concentrator Replacement Blow Flat Hairdressing Salon Styling Tools,Type A

[Package]: You'll get 2 pcs Black Plastic Hair Dryer Narrow Concentrator Nozzle, One size: 50x60x68 mm/1.96x2.44x2.67 inch The other size: 50x74x75 mm/1.96x2.91x2.95 inch.
[High temperature resistant nylon material]: Our hair Dryer Narrow Concentrator Nozzle is made of high temperature resistant nylon material, high temperature, deformation. It can work well under 150 degrees for a short time.
[Good experience]: With the influence of the nozzles, it can help the air flow gather and disperse, reduce impact for your hair. If your hair dryer diameter below 4.5cm, please use with sponge rubber pad together. New black high-temperature resistant plastic black Hair Dryer Nozzle can make your hair drier lighter, more durable, and more powerful..
[Easy install]: Take off the old air nozzle and put the new air nozzle on the air outlet of the hair dryer, you'll get it.
[warm Tip]: The following three situations cannot be used: 1. Diameter is less than 42mm ,or more than 46mm 2.Metal material hair dryer cannot use 3.Foadable hair dryer cannot use it.

Check Stock

ABS 3D Printer Filament, SUNLU 250g ABS Filament 1.75mm, High Durable Filament,Dimensional Accuracy +/- 0.02 mm, 0.25 kg Spool, 8 Rolls,Black+White+Grey+Blue+Yellow+Green+Red+Orange

...ls of 0.25kg 1.75mm ABS Filament, Multiple Color Choices】8 rolls of 250g SUNLU 1.75mm ABS filament.Color:Black+White+Grey+Blue+Yellow+Green+Red+Orange.Multiple colors satisfy your rich 3d printing creativity.The design of 250g ABS filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
【Strong and Durable ABS Filaments】---SUNLU ABS filament 1.75mm is a strong thermoplastic material—great for creating durable items that require a higher resistance to heat. It can be used for printed parts that are frequently handled, dropped or may be stored at high temperatures, such as mobile phone cases, sports camera mounts, toys, tools, electrical appliance housings, etc..
【High Precision +/- 0.02mm Tolerance PLA filament】: 1.75mm ABS 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 325m of ABS filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
【No Clogging, No Bubbles and Good Adhesion】Better flow of SUNLU no plugging premium 1.75mm ABS filament.It has consistent diameter & roundness,less stringing and warping,strong la....

Check Stock

Upgrade Plated Wear Resistant M6 Thread Brass Nozzle Pack 0.4mm for 1.75mm V6 Hotend Titan Aero Extruder Prusa I3 MK3 MK3S Anycubic I3 Mega S/Zero 2.0 / Vyper 3D Printer 4x0.4mm

Nozzle size: 0.4mm, M6 thread for 1.75mm filament use.
The nozzle material is brass to keep good thermal conductivity, the Nickel coating can increase the lifetime of the nozzle and prevent the nozzle....
Nickel plating has High hardness and wear resistance, Apply Nickel plating on the nozzle surface can reduce the friction, to make it smoother when....
Compatible with V6 V5 hotend, Ultimaker 2+ olsson block hotend, Prusa i3 Mk3 mk3s Anycubic I3 Mega 3D Printer.

Check Stock

25PCS 3D Printer Nozzles, Premium MK8 Nozzle Ender 3 Nozzles 0.4 mm, 3D Printer Brass Nozzles for Makerbot Creality CR-10 Ender3 V2 Ender3 Pro with 5 Needles by Zojicif

【High precision】the inner wall of the 3D printer nozzles is smooth and has no burrs, its viscosity coefficient is small, high precision&perfect aperture, so premium MK8 nozzle can prevent print head from leakage and allow for easy flow of the filament without clogging..
【Premium Quality】Our 3D printer nozzle are made of high quality brass material, heavy duty and provide a long service life, easy to install and change. Our premium MK8 Ender 3 Nozzles input diameter 2.00mm, output diameter 0.4 mm, out thread M6, thread length 5mm..
【Applicability and Compatibility】Our premium MK8 nozzles ender 3 nozzles fit for 3D Printers like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series, compatible-with all 1.75mm PLA ABS 3D printers. Fit exactly like the original..
【Good performance】Our precision 3d printer brass nozzles MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be applied for printing filaments of carbon fiber, fiberglass, etc..

Check Stock

Ewigkeit MK8 Hotend Ender 3 and Pro Assembled Extruder with Aluminum Heating Block 0.4mm Nozzle(24V 40W)

Ender 3 hot end with 100% original and high quality accessories for Creality 3D printer.
Ender3 pro Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm.
MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge is 24V 40W.
Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.

Check Stock