Reviews8 Inch Compression Driver

2 JBL Pro JRX215 15 2000w Professional Passive PA/DJ Speakers 8 Ohm JRX 215

  • Features: JRX215 15" Two-Way Sound Reinforcement Loudspeaker System. JBI 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon....
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF....
  • Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power....
  • Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL: 129 dB. Nominal Dispersion : 90 x 50. Crossover....
  • High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive TransitionWave guide. Low Frequency Driver : JBI M115-8A.....
Check Stock

DS18 PRO-DR250TI 2” VC Tweeter Compression Driver - 300W Max, 200W RMS, 8 Ohms, Titanium Diaphragm, Aluminum Body, Set of 1

  • 2" COMPETITION COMPRESSION DRIVER - These are the epitome of competition-quality compression drivers. Titanium diaphragm, Kapton voice coil and a ferrite magnet make these the best drivers available..
  • PEAK POWER HANDLING - At 300W Max and 200W RMS the PRO-DR250TI compression driver boasts out-of-this-world power handling for a Pro audio sound you will love..
  • HIGH-QUALITY MAGNETS - Settle for nothing but the best with a 10.5 oz Ferrite magnet that produces a wider range of tones and can handle tremendous power at high volumes..
  • USE WITH A WIDE VARIETY OF HORN STYLES - This compression driver features standard 1" (25.4mm) TPI threading, which allows it to work as a replacement driver for many popular horns..
  • DURABLE & LONG LASTING PERFORMANCE - this compression driver doesn’t draw an excessive amount of power from your amplifier & ensures long-lasting performance from your equipment..
Check Stock

Klein Tools 80027 Screwdriver Set, 11-in-1 Multi-bit Screwdriver, 6-in-1 Stubby Screwdriver, Phillips, Slotted, Square, Torx Bits, 2-Piece

  • Klein Tools Multi-Bit Screwdriver Tool Kit includes the 11-in-1 multi-bit screwdriver / nut driver (Cat. No. 32500) , and the 6-in-1 multi-bit stubby screwdriver / nut driver (Cat. No. 32561).
  • 11-in-1 multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • 11-in-1 includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • 6-in-1 multi-bit stubby screwdriver / nut driver with compact interchangeable shaft holds 4 universal tips and converts to 2 nut driver sizes.
  • 6-in-1 includes non-magnetic nut driver sizes 1/4-Inch (6 mm) and 5/16-Inch (8 mm) and Screwdriver sizes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted.
  • The compact design of the multi-bit stubby features standard 1-1/4-Inch (32 mm) shaft allowing easy access to tight work spaces.
  • Cushion-Grip handle provide greater torque and comfort.
Check Stock

Rockville SPG88 8\ Inch Passive 400w DJ PA Speaker ABS Lightweight Cabinet 8 Ohm

  • ...ts side for use as a floor monitor. Versatile trapezoidal enclosure design allows different positioning.
  • Twist-Lock speakon input and output connections. Ultra-wide dispersion, 40° large-format horizontal wave guide horn molded directly into the cabinet. State-of-the-art 1.35'' Japanese made pure titanium-diaphragm compression driver for crystal clear high-frequency reproduction..
  • Ergonomically shaped handle for easy carrying and setup. High-quality components and exceptionally rugged high impact ABS construction. Impedance: 8 Ohms. Frequency Response: 50Hz-20KHz. Maximum SPL @1w/1m: 119dB peak / 116dB continuous.
  • The crossover in the SPG8 utilizes a Rockville's unique constant impedance circuit design. With equalization based on unique driver parameters and cabinet design properties the SPG speakers sound dispersion patterns match both the compression horn and woofers..
Check Stock

Klein Tools 32557 Multi-Bit Screwdriver/Nut Driver, Heavy Duty

  • Interchangeable shaft holds 6 universal tips.
  • converts to 3 nut driver sizes and 1 hex driver.
  • Nut drivers are heat-treated for added strength and improved torque.
  • Cushion-Grip handle provides superior comfort.
  • Contains: 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted, #1 and #2 Phillips, 1/4-Inch (6 mm), 5/16-Inch (8 mm), and 3/8-Inch (10 mm) nut drivers, #1 and #2 square-recess, 3/8-Inch hex driver.
Check Stock

Navika Golf Balls- Colorado State Flag (6-Pack)

  • All-Over Canadian Flag Imprint | Bright colors provide enhanced visibility for long distance in air or ground light conditions.
  • 85 compression: Low Compression reduces spin for increased distance.
  • Longer flight distance in achieved with a soft outer layer and a hard inner core | Driver: Low Spin / 8-Iron: Medium Spin.
  • Translucent two-piece Surlyn coating | New Soft N2 Rubber Core elevates short game control with a soft touch feel and low compression control.
  • Dimple Design 336 Circular Pattern | Weight: 45gm / Diameter: 42.6mm | Conforms to USGA and R&A Standards.
Check Stock

1.35 Inch Tweeter Horn Driver - 400 Watt High Power Car Audio Speaker System w/ Flat Aluminum Voice Coil, Titanium Diaphragm, 1kHz-20 kHz Frequency, 104 dB, 8Ohm, Heavy Duty 20 oz Magnet - Pyle PDS342

  • 200 Watts RMS / 400 Watts Peak Power Handling - 20 oz. Magnet Structure.
  • Midrange / Tweeter Compression Driver - 1.35'' (34.4mm) Flat Aluminum Voice Coil - Titanium Diaphram.
  • Sensitivity (1w/1m):104dB SPL - Frequency Response: 1kHz ~ 20kHz.
  • Midrange/Tweeter Compression Horn Driver.
  • Titanium Diaphragm, 1.35 (34.4mm) Flat Aluminum Voice Coil.
Check Stock

JBL Professional Control 328C Coaxial Ceiling Loudspeaker with HF Compression Driver, 8-Inch

  • Consistent 120° broadband pattern control covers an extremely large area.
  • Shaped mounting baffle provides the pattern control of a 300 mm (12 in) Horn from a 200 mm (8 in) driver.
  • Components: 200 mm (8 in) woofer with kevlarre reinforced cone and 50 mm (2 in) voice-coil, 25 mm (1" Exit) compression driver.
  • Extraordinary clarity for speech and vocals with extended frequency response for music.
  • 250 Watt power handling with very high sensitivity provides high SPL capability.
Check Stock

(2) JBL Pro JRX215 15″ 2000w PA/DJ Speakers+Powered 12-Channel Mixer+Stands

  • ..., USB, 48V, (1) Pair of Rockville Tripod Speaker/Lighting Stands+(2) 20 Foot 1/4″-SpeakOn Cables.
  • Features of JRX215:, JRX215 15″ Two-Way Sound Reinforcement Loudspeaker System, JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil, JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver, Advanced network topology crossover design, High-voltage capacitors and inductors with massive cores and heavy gauge wire, Progressive Transition high frequency waveguide, 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure.
  • Details:, Power Rating : 250 W / 1000W, Frequency Range (-10 dB) : 41 Hz – 18 kHz, Frequency Response (±3 dB) : 59 Hz – 13 kHz, Sensitivity (1w/1m) : 99 dB SPL, Nominal Impedance : 8 ohms, Recommended Amplifier Power : 250 W to 500 W into 8 ohms, Maximum SPL: 129 dB, Nominal Dispersion : 90º x 50º, Crossover Frequency : 2.2 kHz, Dimensions (H x W x D) : 699 mm x 460 mm x 432 mm (27.5 in x 18.1 in x 17 in), Weight : 27.4 kg (60.5 lb).
  • Rockville RPM109 12 Channel 4800w Powered Mixer, 7 Band EQ, Effects, USB, 48V , RMS Power Output:, …..600w x 2 @ 4 Ohm, …..450w x 2 @ 8 Ohm, …..1200w x 1 @ 8 Ohm, Program Power Output:, …..1200w x 2 @ 4 Ohm, …..900w x 2 @ 8 Ohm, …..2400w x 1 @ 8 O....
Check Stock

Impact Grade Socket Adapter/Extension Set Turns Power Drill Into High Speed Nut Driver,1/4-Inch Hex Shank to Drive for Adapters to Use with Drill Chucks Sizes 1/4 3/8 1/2 Cr-V 3-Piece

  • PACKAGE CONTAINS:3Pcs - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket wrench adapter....
  • USES: Attach these Versatile Extender Bars to any Powered/Cordless Drill Chuck or Impact Driver to turn it into a High-Speed Nut Driver – Useful for....
  • Multifunction: used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for....
  • Durability: Quality is a guarantee with this 3 piece sturdy and durable solid steel set designed to withstand torque compression under most standard....
  • Warranty: We believe in our products there for we offer a 30 day money back guarantee along with a 12 month replacement warranty for this high quality....
Check Stock

DEWALT XTREME 12V MAX* Cordless Drill Combo Kit (DCK221F2)

  • DCD701 12V MAX* Brushless 3/8 inch drill/driver has 32% more power**.
  • DCD701 12V MAX* Brushless 3/80-inch drill/ cordless impact driver is 20% shorter**.
  • Brushless motor for maximum runtime and durability.
  • The drill/driver has a 3/8 inch ratcheting chuck for a wide variety of bits.
  • The drill/driver has a high speed transmission with 2-speed settings and 15 clutch settings.
Check Stock