ReviewsA frame Trailer Jacks

osemar Boat Trailer Jack with Wheel 1500 lbs 6\ Dual Wheels Swivel

  • Small trailer jack wheel, , lifts and lowers your boat trailer, lifting capacity: 1500 pounds, adjustable height: 10-1/2"..
  • Trailer jacks using precision seamless steel pipe, the surface is galvanized, anti-corrosion and anti-oxidation..
  • Boat trailer jack heavy duty thicken and widen, high-load double nylon wheels, loose nut, effortless implementation and high safety..
  • 1500 trailer jack mounting plate and interface are double-layer reinforced, with strong bearing capacity and durability..
  • boat trailer stand crank handle is upgraded, the installation screw cap is detachable, and the handle cover is more convenient to replace..
Check Stock

3/4 Impact Driver Hex Socket Magnetic Nut Driver RV Lift Truck Trailer Stabilizer Leveling Scissor Jack Socket 2pcs

  • ✓ Raise and lower scissors jacks more quickly and easily using power drill torque to raise/lower jacks..
  • ✓ Works on both 19mm or 3/4" Hex Head Scissor Jack RV Trailer Stabilizers..
  • ✓ Reduces time and effort to raise or lower your scissor jacks..
  • ✓ Constructed of heavy duty. 1-year replacement warranty..
Check Stock

Fulton 500320 XP to F2 Adapter Kit for F2 Swivel Mount with 4' Frame

  • Fulton F2 Jack Adapter Plate allows you to upgrade from a Fulton Center-Bolt Swivel Mount Jack to an F2 Series Marine and Recreational Jack.
  • Fits Fulton's patented center-bolt design - used on XP10 and XP15 weld-on jacks.
  • Heavy-duty, cast aluminum mount is tapered, moving wheel closer to center line of trailer frame to optimize castering performance.
  • installs easily - no drilling or welding required.
  • All necessary mounting hardware and complete installation instructions included.
Check Stock

HQRP Toggle Switch Compatible with Ultra-Fab UF38-944014 UF38-944016 UF38-944017 A-Frame Electric Trailer Tongue Jacks 38-75-1037

  • Compatible with: Ultra-Fab UF38-944014 UF38-944016 UF38-944017 A-frame Electric Trailer Tongue Jacks 38-75-1037.
Check Stock

Dumble 5th Wheel Tripod Stabilizer Gooseneck Trailer Jack - 5000lb Cap Adjustable RV Jack Stabilizer RV King Pin Tripod

  • ... Heavy Duty RV Stabilizer Jacks will minimize front-to-back and side-to-side motion so you can enjoy your everyday activities discreetly.
  • [Physics At Work]: Align gooseneck camper stabilizer jacks under the king pin of your camper or motorhome to lift the front end of your trailer and adjust the center of gravity.
  • 5,000-pound (2.5ton) weight capacity adds support and enhances stability.
  • [Built to Last]: Steel RV fifth wheel tripod stabilizer jack is powder-coated to resist elements and provide optimal durability.
  • Zinc-plated chain keeps RV stand legs aligned for optimal strength and reliability.
  • [Fits Your Needs]: 4.5-inch (11.4cm) tall cup has a 3-inch (7.6cm) internal diameter to fit the king pin on your travel trailer, camper, boat, and mobile home.
  • Threaded bar makes it easy to adjust the cup height.
  • [Adjust and Store Easily]: King pin 5th wheel stabilizer jacks adjust to heights between 39 and 57 inches (99.1 x 144.8cm).
  • When not in use, adjustable tripod folds to 7-inch (17.8cm) diameter for easy storage.
Check Stock

Lippert 191023 JT's Strong Arm Fifth-Wheel Jack Stabilizer Kit

  • ELIMINATES CHASSIS MOVEMENT — The JT’s Strong Arm Stabilizer Kit is designed to eliminate chassis movement in your 5th wheel RV or travel trailer using the same engineering as a race car chassis.
  • EASY INSTALLATION — With no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation.
  • THREE CONFIGURATIONS — Available in three sizes: Standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer.
  • COMPATIBILITY — This stabilizer kit was designed to work with most major RV jack assemblies — including, scissor, front landing gear and telescoping.
  • FULLY EQUIPPED — Kit comes complete with inner tubes, outer tubes and all necessary mounting and installation hardware.
  • RV fifth-wheel jack stabilizer kit comes complete with everything needed for DIY installation.
  • Designed to eliminate side-to-side and front-to-rear RV movement and shaking.
  • Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying.
  • The kit was designed for installation by your dealer or the do-it-yourself on fifth-wheel RVs with 58 inches or greater distance between the two front landing gear legs.
Check Stock

3/4 Impact Driver Hex Socket Magnetic Nut Driver RV Lift Truck Trailer Stabilizer Leveling Scissor Jack Socket

  • ✓ Raise and lower scissors jacks more quickly and easily using power drill torque to raise/lower jacks..
  • ✓ Works on both 19mm or 3/4" Hex Head Scissor Jack RV Trailer Stabilizers..
  • ✓ Reduces time and effort to raise or lower your scissor jacks..
  • ✓ Constructed of heavy duty. 1-year replacement warranty..
Check Stock

MAXXHAUL Trailer Jack Wheel

  • Bolt-on trailer jacks for use with utility and boat trailers.
  • Our Jack features a swivel or swing back bracket that allows jack to be out of the way when not in use.
  • Heavy duty pull pin securely lock jack into place in the horizontal or vertical position.
  • Trailer tongue jack has a 10" vertical lift and includes a side wind handle with swivel grip for convenient operation.
Check Stock

Camco Patented FasTen Leveling Blocks for RVs, Interlocking RV Leveling Blocks 4 x 2, Pack of 10 (21023)

  • RV Leveling Blocks: These 10 interlocking leveling blocks stack to the desired height for safe and easy leveling.
  • each block measures 17 x 8.5 inches each and adds a full inch to stack height.
  • Incorporated Handle: Camper leveling blocks come with a handle that holds the blocks together by screwing them to the base.
  • helps to carry, keep, and store the trailer leveling blocks.
  • Strong and Durable: Lightweight and durable, these RV levelers are made of UV-stabilized resin designed for years of rugged use.
  • Multiple Uses: RV blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles.
  • product dimensions are 17 x 8.5 x 1 inches.
  • Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.
Check Stock

16 oz. Fiberglass Claw Hammer

  • Powered trailer jack with 4,500 pound rating, 12-volt operation, hardened steel gears, and soldered connections.
  • 18-inch full stroke with 6-inch adjustable drop-down leg reduces time to set jack and reduces wear on motor.
  • 3-sided LED light system to illuminate hitch and spring bar area.
  • Features a friction-reducing ball screw, usually only found in more expensive jacks.
  • Weather-resistant trailer connector storage bracket with durable hammer gray finish.
Check Stock

Preservation Solutions - Wood Juice Quart - Semi Dry Wood Stabilizer

  • Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie base.
  • Includes 4 steel jacks and 1 crank handle, Also include a 3/4" hex magnetic socket to raise/lower jack faster by power drill!.
  • Aslo include 16 pcs 3/8" mounting screws & matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you....
  • Extended height: 24", Retracted height: 4", retracted length: 26-1/2", width: 7.5".
  • Capacity: 6,000 lbs per jack, bulit by same material as other brand's 7500lbs jacks!.
Check Stock