ReviewsAbrasive Cloth Belts

3/4X12 Inch 2 Pack Leather Honing Polishing Belt Super Strop With White and Green Compound Fits Ken Onion Work Sharp

  • ...along with 2 types of sharpening compound.
  • 3/4X12 Super Strop Leather Honing Polishing Belts are designed and guaranteed to run on the Ken Onion Edition Work Sharp Knife and Tool Sharpener..
  • Premium Made in USA White & Green Buffing compound and brief instructions included. The White Buffing compound is an ultra fine abrasive that is specifically designed to be applied to the Leather Stropping Belt. The buffing compound will help to refine the edge of your knife, removing very small fragments of the Burr or Wire Edge. Removing these fragments can extend the life of the edge. The addition of the Green Polishing Compound will allow you to get the finest looking edge..
  • 2 Leather belts are included, One for each of the compounds. The 3/4×12 Leather Belt 2 Pack is our best value with the same great quality 3/4X12 Ken onion Leather belts and the same great Guarantee. 100% Satisfaction Guarantee!The White Cutting Compound slightly more abrasive and will remove small fragments of burr and refine the edge. The Green Polishing Compound will give a mirror edge and truly refined professional results..
  • SUPER STROP LEATHER HONING BELT GUARANTEE | SUPER STROP Premium Leather Honing Belts are guaranteed against manufacturer defects, material defects & User Error. If yo....
Check Stock

Work Sharp Kit Replacement Sharpening Belts, Red

  • Replacement Belt Kit Includes Three Red P120 Medium Belts and Fits the E5 and E3 Sharpeners..
  • Professional Grade Abrasive Belts for Sharpening and Honing. the Abrasives Are Engineered to Constantly Expose a New Surface As They Wear, Creating Consistent Results Throughout the Life-Cycle of the Belt..
  • Manufactured by Norton Abrasives, the Norax Brand Sharpening Belts Are the Same Belts Professional Knife Makers and Sharpening Services Use to Create Factory-Fresh Cutting Edges..
Check Stock

Work Sharp WSGPS-W Pocket Knife Sharpener

  • Replacement Abrasive Belts for Work Sharp Professional Electric Knife Sharpener. Also Fits E5, E4, and E5-NH Sharpeners..
  • 6000 fine grit replacement belts for WSKTS, WSKTS2. For knife honing and maintenance..
  • For use with Work Sharp Knife and Tool Sharpener only.
  • Abrasives: Silicon Carbide (6000) with flexible cotton backing with polymer emulsion cushioning layer..
  • Includes six (6) purple micromesh 6000 grit belts..
Check Stock

3M 81433 4-Inch x 24-Inch Purple Regalite Resin Bond 120 Grit Cloth Sanding Belt, Pack of 5

  • This item is 3M 761D Coated Sanding Belt – P120 Grit – 4 in Width x 24 in Length – 81433 [PRICE is per BELT].
  • The product is manufactured in United States.
  • Features long-lasting, durable 3M¿ Cubitron¿ abrasive grain on a strong Y-weight cloth backing.
  • The closed coat feature provides a better finish and less aggressive cut than a comparable open coat abrasives of the same grade.
Check Stock

Work Sharp WSSAKO81114 Tool Grinder Attachment Replacement Belt Kit

  • Extra Coarse Grit Replacement Abrasive Belt Kit for the Work Sharp Knife & Tool Sharpener Ken Onion Edition (WSKTS-KO)..
  • Kit includes (5) P120 Extra Coarse Grit Norton Ceramic Belts..
  • Belts are 3/4" x 12" and ONLY fit the Ken Onion Edition Sharpener and Tool Grinding Attachment..
  • These premium grade, engineered abrasives are long lasting and designed for knife & tool sharpening and grinding applications..
  • Belts are manufacted in the USA by Norton Abrasives for Work Sharp..
Check Stock

Work Sharp WSSA0002001 Leather Hone Kit (WS3000 ONLY) , Beige

  • Medium Grit Replacement Abrasive Belt Kit for the Work Sharp Knife & Tool Sharpener Ken Onion Edition (WSKTS-KO)..
  • Kit includes (5) X22 Medium Grit Norton Norax 22 Micron Belts (P1000 equivelent)..
  • Belts are 3/4" x 12" and ONLY fit the Ken Onion Edition Sharpener and Tool Grinding Attachment..
  • These premium grade, engineered abrasives are long lasting and designed for knife & tool sharpening and grinding applications..
  • Belts are manufacted in the USA by Norton Abrasives for Work Sharp..
Check Stock

Work Sharp Knife & Tool Sharpener Ken Onion Edition & Official Replacement Belt Kit for the Work Sharp Knife and Tool Sharpener Ken Onion Edition

  • ...E SPEED MOTOR – handle every sharpening task, from grinding to honing. More power with improved cooling & the option of slow speed honing or high speed grinding. The variable speed control (1, 200 SFM to 2, 800 SFM) provides you with the optimal belt speed for the task at hand.
  • Product 1: PREMIUM FLEXIBLE ABRASIVE BELTS – deliver a strong, long lasting razor-sharp convex edge.
  • Product 1: FAST, PRECISE, & REPEATABLE – sharpening results with no set up or calibration time. The 6000 grit belt measures ½ x inches) for better contact with Serrations, gut hooks and other hard to reach edges.
  • Product 2: Replacement abrasive belt assortment for the Ken Onion Edition Work Sharp Knife & Tool Sharpener (WSKTS-KO) only.
  • Product 2: Belts are 3/4″ x 12″ (except 6000 Micro-Mesh, which is 1/2″ x 12″) and do not fit any other Work Sharp tools or accessories.
  • Product 2: Replacement abrasive belt assortment for the Ken Onion Edition Work Sharp Knife & Tool Sharpener (WSKTS-KO) only. Not compatible with other Work Sharp tools..
  • Product 2: Belts included: P120 Extra Coarse Grit – 3/4″ x 12″ X65 Coarse Grit (P220 equivalent) – 3/4″ x 12″ X22 Medium Grit (P1000 equivalent) – ....
Check Stock

3M Trizact 2 X 72 Inch Sanding Belts A30 (P800), A16 (P1200), A6 (P2500) Grit, 3 Pack Assortment

  • 3 Pack Assortment contains 1 each: A30 (P800), A16 (P1200), A6 (P2500) Grit Belts.
  • 3M Trizact technology delivers consistent, superior results | Number one choice of metalworkers worldwide.
  • Excellent for sharpening steel knives | Ideal for finishing soft metals (Copper, Aluminum, Brass, etc.) | Also great for fine finishing of hard metals (Stainless Steel, Carbon, etc.).
  • Pyramid shaped aluminum oxide abrasive breaks down under pressure, exposing fresh, sharp cutting surfaces as it wears.
  • Durable, full flex, JE Weight Rayon cloth backing easily conforms to contoured surfaces.
Check Stock

Work Sharp WSSAKO81117 Extra Coarse Grit Belt Kit for Ken Onion Edition

  • Fine Grit Replacement Abrasive Belt Kit for the Work Sharp Knife & Tool Sharpener Ken Onion Edition (WSKTS-KO)..
  • Kit includes (5) X4 Fine Grit Norton Norax 4 Micron Belts (P3000 equivelent)..
  • Belts are 3/4" x 12" and ONLY fit the Ken Onion Edition Sharpener and Tool Grinding Attachment..
  • These premium grade, engineered abrasives are long lasting and designed for knife & tool sharpening and grinding applications..
  • Belts are manufacted in the USA by Norton Abrasives for Work Sharp..
Check Stock

Work Sharp Culinary CPAC004 East and West Guides Upgrade Kit, Multicolor

  • The E5 Upgrade Kit adds versatility with 15° and 20° sharpening guides, and specialty sharpening belts optimized to create traditional East and West edge profiles..
  • The East/West sharpening guides easily snap into place of the standard guides, while the included storage tray keeps your other guides organized..
  • The E5 Upgrade Kit includes 4 types of belts: one Blue ZA Coarse belt, two Red P120 Medium belts, one Grey X35 Fine belt, and one White X4 Extra-Fine belt..
  • Manufactured by Norton Abrasives, the NORaX brand sharpening belts are the same belts professional knife makers and sharpening services use to create factory-fresh cutting edges. The belts are gentle on knives while creating an amazingly sharp edge – even on today’s most advance cutlery steels..
  • Abrasives are designed to sharpen without removing excessive material, protecting the value of your kitchen knives. The belts are engineered to expose fresh abrasive as they’re used, producing consistent sharpening results throughout the life of the belt..
Check Stock

IIT 82039 80 Grit 2\ Roll Lock Sanding Discs (50 PC )

  • INCLUDES: (1) Abrasive Cleaning Stick 8-1/2" x 1-1/2 " x 1-1/2" Large Size.
  • FUNCTION: Extends the lifespan of your sanding disc, belts and other sander equipment by removing sawdust, pitch, gum, glue and other residue without damaging the grit.
  • PREMIUM: Made with a professional grade all-natural rubber construction, this sanding eraser is designed for durability and comes with an extended length and sizable girth to take on most of your sandpaper cleaning jobs.
  • EASY TO USE: While the sander is running, hold eraser stick against your selected abrasive to remove the build-up, clogged dust, debris and particles – returning a like new look to your sanding surface.
  • VERSATILE: Ideal for cleaning sanding belts, disc sanders, drum sanders, skateboard grip tape, rubber bottom shoes (Not intended for plastic or use on conveyor-feed type sanders) Please note: Works best on cured or dry residue.
Check Stock