Disston E0104578 1-1/4-Inch RemGrit Carbide Grit Arbored Hole Saws 32mm
- Cutting edge of tungsten carbide particles bonded to alloy steel back.
- High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting.
ReviewsAbrasive Cloth Cutting Machine
DEWALT DW3511 7-Inch X 1/8-Inch Metal Abrasive Blade,Black
- Aluminum oxide grain for long life and fast cutting.
- Diamond knockout arbor for use with worm drive saws.
- Proprietary material mix ensures durable long life wheels.
Clear Cutting Board for Kitchen with Lip with Non Slip 24 Wide x 18 Long AZM Displays
- FOOD SAFE! Acrylic material is safe to have direct contact on your food!.
- DISCLAIMER! Acrylic cutting boards are NOT scratch resistant. Just like all other kinds of cutting boards, knife marks will show. Do NOT use ANY glass cleaner, or any abrasive cleaner. ONLY use dish soap and water to clean the cutting board.
- CONVENIENT SIZE. This cutting board measures 24 x 18 inches, with a 1.5-inch lip that helps protect your entire work surface. Please note that there is a size tolerance.
- Do NOT use ANY glass cleaner, or any abrasive cleaner. ONLY use dish soap and water to clean the cutting board.
- NON SLIP FEET. All of our AZM Displays cutting boards comes with rubber feet to prevent the cutting board from sliding..
DCT Abrasive Paper 5pc Sand Paper Variety Pack with Dispenser 150, 240, 320, 400, 600 Grit Aluminum Oxide Sandpaper
- SANDPAPER ASSORTMENT: Use the DCT | 150-600 Grit Assorted Sandpaper with Dispenser when narrow 1-inch (2.5cm) strips of abrasive sanding paper are needed.
- Back of each roll is cloth-backed and marked with grit number approximately every 9 inches (22.9cm).
- FINISH YOUR PROJECT: Ideal for glass sculptures, fine metal jewelry, sanding on lathes, or any detail woodworking projects such as turning spindles, pens, bowls, and moldings.
- Fabric-backed for longer life than paper-backed or sticky (adhesive) PSA sandpaper.
- SAVE TIME: Rolls are cut into convenient 1-inch (2.5cm) wide strips.
- Box includes 5 dispensing slots and 1 built-in sandpaper cutting blade on the bottom edge of the box to cut off a piece of the included sandpaper.
- Keeps everything neat and tidy so you have less waste.
- RESTOCK LESS: Each roll is 20-feet (6m) long so you restock less.
- The included dispenser box has the 5 rolls of sandpaper nicely organized to roll smoothly when you need it.
- PACKAGE CONTENTS: Package contains (1) roll of each cloth-backed aluminum oxide 150 grit, 240 grit, 320 grit, 400 grit, and 600 grit sandpaper (5 total) and (1) dispenser with sandpaper cutting blade.
Thirteen Chefs Large Acrylic Cutting Board, 16x10 Inch with Rubber Feet, Clear - Dishwasher Safe, BPA Free
- FOOD SAFE! Acrylic material is safe to have direct contact on your food!.
- DISCLAIMER! Acrylic cutting boards are NOT scratch resistant. Just like all other kinds of cutting boards, knife marks will show. Do NOT use ANY glass cleaner, or any abrasive cleaner. ONLY use dish soap and water to clean the cutting board.
- CONVENIENT SIZE. This cutting board measures 24 x 18 inches, with a 1.5-inch lip that helps protect your entire work surface. Please note that there is a size tolerance.
- Do NOT use ANY glass cleaner, or any abrasive cleaner. ONLY use dish soap and water to clean the cutting board.
- NON SLIP FEET. All of our AZM Displays cutting boards comes with rubber feet to prevent the cutting board from sliding..
Evolution 12 Inch Multi Material Diamond Blade With Segmented Edge, 1 In Bore, Multi-Purpose & Metal Cutting Diamond Blade
- Compatible with the R300DCT Concrete Cutting Saw and the R300DCT+ Concrete Cutting Saw.
- Multi-material Cutting: One saw & One blade will cut most common building materials including ferrous & non-ferrous metals, reinforced concrete, bricks, tiles, plastics & more saving you time and money.
- 30x Longer Life: Up to 30x longer blade life than abrasive discs when cutting metal Diamond cutting edge is incredibly tough and can make over 1,000 cuts through steel.
- Constant Diameter: Steel blade body with diamond cutting edge maintains its full diameter so you have maximum cutting capacity for the lifetime of the blade.
- Cleaner & Safer: The steel body won’t shatter, unlike abrasives, which can cause serious injury Less dust, less sparks & less odour vs abrasive discs, make this a safer cutting solution.
- Segmented rim design with sub-segmented cutting edge improves efficiency & removes debris from the cut.
Evolution 9 Inch Multi Material Diamond Blade with Segmented Edge, 7/8 in Bore, Multi-Purpose & Metal Cutting Diamond Blade
- Compatible with the R230DCT Concrete Cutting Saw.
- Multi-material Cutting: One saw & One blade will cut most common building materials including ferrous & non-ferrous metals, reinforced concrete, bricks, tiles, plastics & more saving you time and money.
- 30x Longer Life: Up to 30x longer blade life than abrasive discs when cutting metal Diamond cutting edge is incredibly tough and can make over 1,000 cuts through steel.
- Constant Diameter: Steel blade body with diamond cutting edge maintains its full diameter so you have maximum cutting capacity for the lifetime of the blade.
- Cleaner & Safer: The steel body won’t shatter, unlike abrasives, which can cause serious injury Less dust, less sparks & less odour vs abrasive discs, make this a safer cutting solution.
- Segmented rim design with sub-segmented cutting edge improves efficiency & removes debris from the cut.
Evolution 10 Inch Multi Material Diamond Blade With Segmented Edge, 7/8 In Bore, Multi-Purpose & Metal Cutting Diamond Blade
- Compatible with the R255DCT Concrete Cutting Saw.
- Multi-material Cutting: One saw & One blade will cut most common building materials including ferrous & non-ferrous metals, reinforced concrete, bricks, tiles, plastics & more saving you time and money.
- 30x Longer Life: Up to 30x longer blade life than abrasive discs when cutting metal Diamond cutting edge is incredibly tough and can make over 1,000 cuts through steel.
- Constant Diameter: Steel blade body with diamond cutting edge maintains its full diameter so you have maximum cutting capacity for the lifetime of the blade.
- Cleaner & Safer: The steel body won’t shatter, unlike abrasives, which can cause serious injury Less dust, less sparks & less odour vs abrasive discs, make this a safer cutting solution.
- Segmented rim design with sub-segmented cutting edge improves efficiency & removes debris from the cut.
EZARC Cut Off Wheel 25 Pack, 4.5\ x .045\ x 7/8\ Cutting Wheel, Metal & Stainless Steel Cutting Disc for Angle Grinder
- 【Long Lasting Discs】Our metal cutting disc is made of iridium-plated white corundum, so our cut-off wheel has 2 times the cutting life of a normal cutting wheel. These cutting discs are made by a special process of alumina abrasive to ensure extra toughness, sharpness, and durability..
- 【Great Performance】The ultra-thin design of 0.45inch thickness cutting off wheels provides fast, precise, and clean cutting performance with minimal burrs and material waste..
- 【Versatile Applications】Tough abrasive cutting discs are ideal for super-fast, clean cutting in carbon steel, stainless steel, iron, copper, and all other ferrous metals..
- 【Perfect Size】The cutting wheels are suitable for most angle grinders-compatible with all 4.5" angle grinders and 7/8" arbor, operating speeds up to 13,300 RPM and 80M/S..
- 【Reliable Safety】EZARC metal cutting discs comply with international standards and safety requirements such as EN 12413, ASM07. Please wear suitable protective equipment during use 4.5 cutting wheels and do not exceed the specified maximum speed..
EZARC Cut Off Wheels 25 Pack, 3” x 1/16” x 3/8” Cutting Wheel, Metal & Stainless Steel Cutting Disc for Die Grinder
- 【Long Lasting Discs】Our metal cutting disc is made of iridium-plated white corundum, so our cut-off wheel has 2 times the cutting life of a normal cutting wheel. These cutting discs are made by a special process of alumina abrasive to ensure extra toughness, sharpness, and durability..
- 【Great Performance】The ultra-thin design of 1/16" thickness cutting off wheels provides fast, precise, and clean cutting performance with minimal burrs and material waste..
- 【Versatile Applications】Tough abrasive cutting discs are ideal for super-fast, clean cutting in carbon steel, stainless steel, iron, copper, and all other ferrous metals..
- 【Perfect Size】The cutting wheels are suitable for most die grinders-compatible with all 3" die grinders and 3/8" arbor, operating speeds up to 25,000 RPM and 80M/S..
- 【Reliable Safety】 EZARC metal cutting discs comply with international standards and safety requirements such as EN 12413, ASM07. Please wear suitable protective equipment during the use of 3-inch cutting wheels and do not exceed the specified maximum speed..
Microfiber Towels for Cars 3 Pieces 500 GSM polishing Cleaning Home, car and Motorbike - 12 x 12 Inches (30x30cm)
- 【Easy to use】A microfibre cloth that is ideal for cleaning cars and other objects. Everything can be cleaned with this cloth..
- 【Cloth Composition】General Recommendation For Professional Use】Material: 80% Polyester, 20% Nylon, Size: 30 x 30 cm.The microfiber diameter is 0.4 μm,which can effectively catch fine dust particles.The effects of cleaning and oil stains are remarkable..
- 【Absorbent】The dense microfibre absorbs up to 7 times its weight in water, making it a premium cleaning cloth: literally the best microfibre cloth for cars we have ever made. Naturally washable hundreds of times in the washing machine..
- 【Soft and Fluffy】 Non-abrasive microfibre cloth with sewn rounded corners that will not corrode car paint, varnish and surfaces and removes car polish residue during car care and preparation. Also ideal for paint sealing and interior care..