ReviewsAbrasive Coated Belts

3M File Belt Sander 28366, .6 HP motor

  • Ideally suited for use with 3M abrasive belt and Scotch-Brite(TM) belt.
  • Grind and blend from contact wheel or platen, finish and polish from slack of belt.
  • Grind and blend hard-to-reach areas with power and efficiency.
  • Eight different attachment arms are available.
  • Measures 14-9/16-inches length by 5-61/64-inches width.
  • Great for deburring, cleaning, blending and finishing in tight or hard-to-reach areas.
  • Balanced weight distribution and 3M Gripping Material for improved ergonomics and reduced wrist strain.
  • 360 degree rotatable housing and handle for the ultimate in versatility.
  • Attached belt cover won’t fall off during belt changes.
  • Optimized belt speed for 3M Abrasive Belts and Scotch-Brite Belts.
Check Stock

3/4X12 Inch 2 Pack Leather Honing Polishing Belt Super Strop With White and Green Compound Fits Ken Onion Work Sharp

  • ...along with 2 types of sharpening compound.
  • 3/4X12 Super Strop Leather Honing Polishing Belts are designed and guaranteed to run on the Ken Onion Edition Work Sharp Knife and Tool Sharpener..
  • Premium Made in USA White & Green Buffing compound and brief instructions included. The White Buffing compound is an ultra fine abrasive that is specifically designed to be applied to the Leather Stropping Belt. The buffing compound will help to refine the edge of your knife, removing very small fragments of the Burr or Wire Edge. Removing these fragments can extend the life of the edge. The addition of the Green Polishing Compound will allow you to get the finest looking edge..
  • 2 Leather belts are included, One for each of the compounds. The 3/4×12 Leather Belt 2 Pack is our best value with the same great quality 3/4X12 Ken onion Leather belts and the same great Guarantee. 100% Satisfaction Guarantee!The White Cutting Compound slightly more abrasive and will remove small fragments of burr and refine the edge. The Green Polishing Compound will give a mirror edge and truly refined professional results..
  • SUPER STROP LEATHER HONING BELT GUARANTEE | SUPER STROP Premium Leather Honing Belts are guaranteed against manufacturer defects, material defects & User Error. If yo....
Check Stock

Work Sharp Kit Replacement Sharpening Belts, Red

  • Replacement Belt Kit Includes Three Red P120 Medium Belts and Fits the E5 and E3 Sharpeners..
  • Professional Grade Abrasive Belts for Sharpening and Honing. the Abrasives Are Engineered to Constantly Expose a New Surface As They Wear, Creating Consistent Results Throughout the Life-Cycle of the Belt..
  • Manufactured by Norton Abrasives, the Norax Brand Sharpening Belts Are the Same Belts Professional Knife Makers and Sharpening Services Use to Create Factory-Fresh Cutting Edges..
Check Stock

Work Sharp WSGPS-W Pocket Knife Sharpener

  • Replacement Abrasive Belts for Work Sharp Professional Electric Knife Sharpener. Also Fits E5, E4, and E5-NH Sharpeners..
  • 6000 fine grit replacement belts for WSKTS, WSKTS2. For knife honing and maintenance..
  • For use with Work Sharp Knife and Tool Sharpener only.
  • Abrasives: Silicon Carbide (6000) with flexible cotton backing with polymer emulsion cushioning layer..
  • Includes six (6) purple micromesh 6000 grit belts..
Check Stock

Work Sharp WSSAKO81114 Tool Grinder Attachment Replacement Belt Kit

  • Extra Coarse Grit Replacement Abrasive Belt Kit for the Work Sharp Knife & Tool Sharpener Ken Onion Edition (WSKTS-KO)..
  • Kit includes (5) P120 Extra Coarse Grit Norton Ceramic Belts..
  • Belts are 3/4" x 12" and ONLY fit the Ken Onion Edition Sharpener and Tool Grinding Attachment..
  • These premium grade, engineered abrasives are long lasting and designed for knife & tool sharpening and grinding applications..
  • Belts are manufacted in the USA by Norton Abrasives for Work Sharp..
Check Stock

24 Pack 4 x 36 Inch Sanding Belts (120/240/ 400/600/ 800/1000 Grits) High Performance Aluminum Oxide Sander Belts Grinder Knife Sharpener Belt Kit for Woodworking Metal Wet/dry Polishing

  • Enough for Your Various Needs: it comes with a total of 24 pieces abrasive sanding belt( 4 x 120 grits, 4 x 240 grits, 4 x 400 grits,4 x 600 grits,4 x 800 grits,4 x 1000 grits), the enough quantity can satisfy your general polishing requirements needs.
  • Quality Material: our abrasive sanding belt is made from open coat aluminum oxide grain closed coat, polyester cloth backing, for optimal sanding capacity, delivering quick and long lasting sanding, not easy to break or deform, can serve you for a long time.
  • Practical and Reliable: abrasive sanding belts can be antistatic, sanding belts are designed with polyester cloth backing, suitable for wet and dry sanding.
  • Prevent sandpaper from clogging with dust, removes loose abrasive particles and reduces airborne dust.
  • Widely Applicable: sanding belt is suitable for furniture, automobiles, yachts and other industries of metal and non metallic materials glass, stone, granite, cement, composites, plastics and light metal finishing, various complex surface rust, paint.
  • Universal Compatibility: our sanding belt fits orbital sander, providing a grinding and polishing tool and the sanding disc can be antistatic, washable, you can use it with confidence.
Check Stock

Work Sharp WSSA0002001 Leather Hone Kit (WS3000 ONLY) , Beige

  • Medium Grit Replacement Abrasive Belt Kit for the Work Sharp Knife & Tool Sharpener Ken Onion Edition (WSKTS-KO)..
  • Kit includes (5) X22 Medium Grit Norton Norax 22 Micron Belts (P1000 equivelent)..
  • Belts are 3/4" x 12" and ONLY fit the Ken Onion Edition Sharpener and Tool Grinding Attachment..
  • These premium grade, engineered abrasives are long lasting and designed for knife & tool sharpening and grinding applications..
  • Belts are manufacted in the USA by Norton Abrasives for Work Sharp..
Check Stock

Dynabrade (NF1) NitroFile Abrasive Belt Tool | Ergonomic 7 Degree Offset Handle, 0.5 hp 20000 RPM Pneumatic Motor | Multi-purpose for Grinding, Blending, Scuffing

  • MULTI-PURPOSE: The NitroFile's ability to use both coated and non-woven abrasives allows it to perform a wide range of applications. An excellent multi-purpose tool for grinding sharp metal edges, rusted bolts, welds, surface preparation etc. Effective for blending, scuffing grooves and contours..
  • ACCESS TIGHT AREAS: Grinding hard-to-reach spot welds or even through a stripped bolt is easy with Dynabrade abrasive belt tools. Always a versatile option, abrasive belt tools can be an economical, efficient way to blend welds, grind through seized bolts, or even remove seam sealer..
  • OPTIMIZED DESIGN: Features a lightweight, ergonomic 7-degree offset handle design. The grinding head pivots 360 degrees, allowing you to secure the most efficient position for the job. The belt guard easily detaches for quick abrasive change with a simple belt tracking adjustment knob..
  • PNEUMATIC MOTOR: This tool runs belts 1/4"-3/4" wide by 18" long. The air-powered motor runs at 0.5 hp and up to 20,000 RPM. Its gearless pneumatic design means this tool is lightweight, versatile, easier to maintain, and capable of delivering more power. Front exhaust directs dust away from the operator and extends the belt life..
  • NITRO SERIES: Dynabrade Nitro Series tools are high-quality, purpos....
Check Stock

Work Sharp Knife & Tool Sharpener Ken Onion Edition & Official Replacement Belt Kit for the Work Sharp Knife and Tool Sharpener Ken Onion Edition

  • ...E SPEED MOTOR – handle every sharpening task, from grinding to honing. More power with improved cooling & the option of slow speed honing or high speed grinding. The variable speed control (1, 200 SFM to 2, 800 SFM) provides you with the optimal belt speed for the task at hand.
  • Product 1: PREMIUM FLEXIBLE ABRASIVE BELTS – deliver a strong, long lasting razor-sharp convex edge.
  • Product 1: FAST, PRECISE, & REPEATABLE – sharpening results with no set up or calibration time. The 6000 grit belt measures ½ x inches) for better contact with Serrations, gut hooks and other hard to reach edges.
  • Product 2: Replacement abrasive belt assortment for the Ken Onion Edition Work Sharp Knife & Tool Sharpener (WSKTS-KO) only.
  • Product 2: Belts are 3/4″ x 12″ (except 6000 Micro-Mesh, which is 1/2″ x 12″) and do not fit any other Work Sharp tools or accessories.
  • Product 2: Replacement abrasive belt assortment for the Ken Onion Edition Work Sharp Knife & Tool Sharpener (WSKTS-KO) only. Not compatible with other Work Sharp tools..
  • Product 2: Belts included: P120 Extra Coarse Grit – 3/4″ x 12″ X65 Coarse Grit (P220 equivalent) – 3/4″ x 12″ X22 Medium Grit (P1000 equivalent) – ....
Check Stock

Work Sharp WSSAKO81117 Extra Coarse Grit Belt Kit for Ken Onion Edition

  • Fine Grit Replacement Abrasive Belt Kit for the Work Sharp Knife & Tool Sharpener Ken Onion Edition (WSKTS-KO)..
  • Kit includes (5) X4 Fine Grit Norton Norax 4 Micron Belts (P3000 equivelent)..
  • Belts are 3/4" x 12" and ONLY fit the Ken Onion Edition Sharpener and Tool Grinding Attachment..
  • These premium grade, engineered abrasives are long lasting and designed for knife & tool sharpening and grinding applications..
  • Belts are manufacted in the USA by Norton Abrasives for Work Sharp..
Check Stock

Work Sharp Culinary CPAC004 East and West Guides Upgrade Kit, Multicolor

  • The E5 Upgrade Kit adds versatility with 15° and 20° sharpening guides, and specialty sharpening belts optimized to create traditional East and West edge profiles..
  • The East/West sharpening guides easily snap into place of the standard guides, while the included storage tray keeps your other guides organized..
  • The E5 Upgrade Kit includes 4 types of belts: one Blue ZA Coarse belt, two Red P120 Medium belts, one Grey X35 Fine belt, and one White X4 Extra-Fine belt..
  • Manufactured by Norton Abrasives, the NORaX brand sharpening belts are the same belts professional knife makers and sharpening services use to create factory-fresh cutting edges. The belts are gentle on knives while creating an amazingly sharp edge – even on today’s most advance cutlery steels..
  • Abrasives are designed to sharpen without removing excessive material, protecting the value of your kitchen knives. The belts are engineered to expose fresh abrasive as they’re used, producing consistent sharpening results throughout the life of the belt..
Check Stock