ReviewsAbrasive Cup Wheels

HOYIN 6Piece Drill Wire Wheel Cup Brush Set,0.010in Coarse Crimped ,Thicken Face Width with1/4In Hex Shank

• *Size:Wheel diameter: 3 in., 2-1/2 in., 2 in. and 1-1/2 in. (2),Cup diameter: 2 in..
• *Clean virtually any surface quickly and easily with this abrasive finishing brush kit..
• *The crimped wire cup brush is rigidly secured to a safety-designed cup-shaped metal holder for added durability and efficient use..
• *These tough wire wheels are well-filled with crimped, untempered carbon steel wire. 0.010in bristle,which increases the strength of the steel wire. It has reasonable bending design of the curve and also increase the number and thickness of the bristles through the German original automatic production process to ensure that the wire will not quickly fall off during the operation of the brush wheel in the shortest time and works more smoothly..
• Compared with the traditional manual production line, the thickness uniformity, perfect appearance,using stability and safety are greatly improved, and the face width of the tool is also more flexible..

Dremel US550-01 UltraSaw Diamond Grit Metal Blade

• New metal cutting wheel with diamond abrasive grit that allows the wheel to remain sharp longer.
• Lasts 20X longer than typcial fiberglass-reinforced cutting metal wheel, and wheel won’t shrink with use.
• With the abrasive grit wheel, users will spend less time changing wheels, and spend less money buying replacement wheels.
• Works with Dremel corded and cordless Ultra-Saws.

60 Pack Abrasive Wheels, Rocaris 1“ Abrasive Buffing Polishing Wheels Burr for Rotary Tools-1/8\ Shank，Polishing bits

• 【Abrasive Buffing Wheel Set】1“ abrasive wheel with 1/8" silver shank and 6 different grits, Brown 120Grit, Green 180Grit, Red 320Grit, Black 400Grit, Gray 600Grit, White 1000 Grit.
• 【Size】Shanks are 1/8 inch, buffing wheels are 1 inch in diameter abrasive wheel.
• 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
• 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
• 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.

Benchmark Abrasives 6 x 1 x 1 Convolute Deburring Wheel for Metal Deburring Finishing Polishing Surface Conditioning Use with Bench Grinder 9S Fine

• Benchmark Abrasives 6" x 1" x 1" deburring wheels are great for light deburring, polishing, blending machine and belt marks, finishing small parts, etc..
• These convolute deburring wheels are constructed of premium non-woven material impregnated with abrasive grain and wrapped around a solid core. It provides a smooth finish..
• Our high-quality wheels are recommended to be used with bench grinders and pedestal grinders. These wheels are suitable for high stock removal and consistent finish without smearing..
• Efficient deburring wheels are used in various industries like automotive, transportation, mining, shipbuilding, construction, welding, foundries, fabrication, etc..
• All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..

• Comprehensive function bristle disc: GOXAWEE radial bristle disc is a new type of abrasive brush that is superior to sandpaper, wire brush, flap wheels, or other types of sanders, brushes, or abrasive wheels. Molded, abrasive-filled bristles wheel can deburr, blend, finish, polish, clean, and remove coatings more effectively with no harm on the surface..
• Mixed Grit for detail work: Our rotary tools accessories - jewelry tools polishing brush set has 6 different grits with 6 various colors and every grit has 10 pieces for different needs. 1 inch size allows you to use it for detail work at hard-to-reach areas like corners, contours, slits and so on..
• Multi-purpose: The radial bristle brush is a idea for metalworking, paint prep, coating & corrosion removal and works well on aluminum, brass, bronze, carbon steel, cast iron, stainless steel, and other metals..
• Multifunction: Our detail polishing discs suit for deburring, cleaning, finishing, derusting and polishing detailed parts, tiny areas and irregular places..
• Compatibility: The fine polishing wheel brush can be used with most multi-function tools, such as for electric drill, mini grinders and rotary tools, Recommended for rotate speed between 15,000-30,000rpm..

100 Pack Abrasive Wheels, Rocaris 1\ (25mm) Abrasive Buffing Polishing Wheels Burr for Rotary Tools-1/8\(3mm) Shank

• 【Abrasive Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 5 different grits, Brown 120Grit, Green 180Grit, Red 320Grit, Black 400Grit, Gray 600Grit, each grit 20 pieces, total 100 pieces..
• 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel.
• 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
• 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
• 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.

JIUNENG 1 inch Abrasive Wheel Buffing Polishing Wheel Set with 1/8inch Shank for Rotary Tool 80 Grit (25mm) 40Pcs

• 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1"or1-1/2'' in diameter, 25 mm or 38 mm abrasive wheel.
• 【Abrasive Buffing Wheel Set】25 mm/38mm abrasive wheel with 3 mm silver shank and 4 different grits, Brown 80Grit, Green 150Grit, Red 240Grit, Black 300Grit..
• 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
• 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
• 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.

HIPOGT 100 Pcs Abrasive Wheel Buffing Polishing kit for Rotary Polishing Tool Grinding Accessories 2.35mm mandrel

• Shanks are 2.35mm, buffing wheels are 22MM diameter, 33 mm abrasive wheel.
• Abrasive Buffing Wheel Set - Include 100 Pcs of Fiber wheels, Suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass.
• Repair The Dents - Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing.
• Convenient And Practical - Small buffing wheel is an efficient polishing tool of metal, with small, high efficiency, low cost,used with most rotary tools including Rotating..
• Widely Applications - Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a dremel tool, fit for rotay tools grinder etc..

IRWIN Tools Metal-Cutting Circular Saw Blade, 10-inch, 80T (4935561)

• Laser-cut blades and anti-vibration vents keep the blade cool for smooth and accurate cuts.
• Metal cutting-grade carbide teeth withstand impact, reduce wear, and deliver longer blade life.
• Cuts the metal instead of grinding it like abrasive wheels, so the finished product is smoother and cooler to the touch.
• The metal cutting blades also last significantly longer than abrasive wheels making the cost per cut lower.

Shark Industries PN-26-6 Die Grinder Cut-Off Wheels - 6 Pack, 3-Inch x 1/32 x 3/8 Shark Type-1 Double-Reinforced Thin Wheels, 54 Grit, Maximum RPM 25,000 (6 Cutting Discs)

• Double-Reinforced Cutting Wheel - Weve double-reinforced our abrasive cut-off wheels with fiberglass to provide added durability and longevity.
• Made in USA Cut-Off Wheels - You can trust the materials and the manufacturing process used for our abrasive cutting wheels, as they are made in the United States.
• Perfect for cutting carbon steel, cast iron and general-purpose metal.
• Made for Aggressive, High-Speed Cutting - Our wheel can spin at a maximum speed up to 25,000 revolutions per minute. For safety, be sure to use with a guard..
• 6-Pack of Wheels - This kit has six wheels, so youll always have plenty of cut-off wheels on hand to finish the job and to start the next one!.

IRWIN Tools Metal-Cutting Circular Saw Blade, 6-3/4-inch, 40T (4935554)

• Laser-cut blades and anti-vibration vents keep the blade cool for smooth and accurate cuts..
• Metal cutting-grade carbide teeth withstand impact, reduce wear, and deliver longer blade life..
• Cuts the metal instead of grinding it like abrasive wheels, so the finished product is smoother and cooler to the touch..
• The metal cutting blades also last significantly longer than abrasive wheels making the cost per cut lower..