ReviewsAc Current

Fluke TL75 Hard Point Test Lead Set

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

Fluke 3000 FC HVAC Wireless HVAC System

  • Fluke 3000 FC Series Wireless Multimeter with the Fluke Connect app has all the essentials for convenient test and measurement troubleshooting.
  • AC and DC voltage measurements to 1000 V, AC and DC current with 0.01 mA resolution.
  • Continuity, resistance, diode test, capacitance and frequency measurements.
  • a3000 FC Wireless AC Current Clamp Module has all the essentials for convenient test and measurement troubleshooting: True-RMS AC clamp meter and measures up to 400 A AC.
Check Stock

AC Current Transmitter Walfront AC Current Transducer Overload Protector Input AC 0-200A Output DC 0-10V SZT20-CH-10V No Power Required

  • ☛ CURRENT MONITORING -- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
  • ☛ MEASURE CURRENT RANGE -- Self-powered, no external power supply required. Measured current AC 0-100/150/200A, output signal DC 0-10V..
  • ☛ STRAIGHT-THROUGH DESIGN -- Straight-through structure design, isolation withstand voltage up to 2000V. Straight-through wire diameter: 0.35-20mm..
  • ☛ ABS OUTER CASTING -- Hysteresis is less than 1% and can be used under strong magnetic conditions. The outer casing is made of self-extinguishing material ABS..
  • ☛ WIDE APPLICATION -- Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..
Check Stock

CENTAURUS SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA

  • 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • 【HIGH QUALITY】CENTAURUS premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
  • 【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
  • The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
  • 【OPTIMAL RELIABILITY】CENTAURUS SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%～120% rated input current)..
  • 【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

DUNSI SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA

  • 【HIGH QUALITY】DUNSI premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
  • 【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
  • The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
  • 【OPTIMAL PERFORMANCE】DUNSI premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • 【OPTIMAL RELIABILITY】DUNSI SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%～120% rated input current)..
  • 【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

INFURIDER Digital AC/DC Volt Amp Clamp Meter,Wireless Bluetooth Auto Ranging 1000A Ammeter Clamp Multimeter for Voltage,Current,Ohm,Cap,Temperature Tester

  • ⚡【AC/DC Clamp Meter】: The highly sensitive AC DC volt amp clamp multimeter feature with TRMS 6000 counts auto-ranging, be able to accurately measure AC/DC voltage,AC/DC current to 1000A,resistance,capacitance,diode,temperature(℃/℉),Hz,continuity buzzer test,etc..
  • ⚡【Remote Display Via Bluetooth】：Scan the QR code and download the APP first.The wireless Bluetooth digital clamp multi-tester will auto connect with your smart phone in the AILink app(within 15m).Which convenient for you to monitor,log and analyze the max/min/current of volt amp ohm in real time..
  • ⚡【Safety & Protection】：The amperage meter with rubber sheeve to protect your volt meter from being broken by fallen. Overload protection is up to standard of CATⅡ1000V or CATⅢ600V in all range.Non-contact voltage(NCV) function can detect voltage without touching any wires and avoid electric shock ..
  • ⚡【Easy to Operation】：The True-RMS voltmeter ammeter with large backlight display,you can read and record the value easily in darkness.Feature with data hold,low battery indication,auto range function.Press “REL” will show the relative testing and zeroing the clamp tester to obtain more accurate measurement..
  • ⚡【Accurate Current Meter】The AC DC Current measureme....
Check Stock

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ¡¾High Performance¡¿The current clamp can take accurate current readings .The current clamps are the ideal tools to extend the current ranges of Oscilloscope tools.Support Auto zero at power on, relative zero correction function.It has Band wide up to 200KHz,support low battery indication .Adopt of amorphous alloy core, with high performance, low loss ..
  • ¡¾BNC connector¡¿The current clamp Multimeter features a BNC connector and can be plugged directly use. After connected well, switch the current clamp on (power LED should light) and then clamp the jaws around the current carrying conductor as shown. Typical Uses The AC/DC Current Probe simply offers the best value for money without compromising resolution..
  • ¡¾Multiple Test Ranges¡¿The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No ele....
Check Stock

Current Transmitter SZT20-CH-420E Current Transducer Transmitter Transformer Sensor AC Current Converter 0-200A

  • Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output.Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions..
  • The measured current AC: 0-10A / 20A / 50A, 0-100A / 150A / 200A can be selected.Output signal DC: 0-5V / 0-10V /4-20mA three forms are available..
  • Installation and using are easy and convenient, there is no need to connect the dc series into the circuit during measurement.Through-heart structure design, isolation withstand voltage up to 2000V AC..
  • The outer casing is made of self-extinguishing material, safe and durable.It is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems..
  • It is suitable for various applications requiring current and voltage conversion.It has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability..
Check Stock

Fluke 117/323 KIT Multimeter and Clamp Meter Combo Kit

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true-rms for accurate measurements on non-linear loads.
  • The 117 multimeter features Low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non-linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

Switches Be Trippin Funny Master Electrician Fuse Box T-Shirt

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

CR Magnetics CR4411-5 Average RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, 003e= 2K Output Load, 24 VDC +/-10%, 0-5 AAC Input Range, 0 - 10 VDC Output Range

  • CURRENT MONITORING --- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
  • STRAIGHT-THROUGH DESIGN --- Straight-through structure design, isolation withstand voltage up to 2000V. Straight-through wire diameter: 0.35-20mm..
  • MEASURE CURRENT RANGE --- Self-powered, no external power supply required. Measured current AC 0-100/150/200A, output signal DC 0-10V..
  • WIDE APPLICATION --- Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..
  • ABS OUTER CASTING --- Hysteresis is less than 1% and can be used under strong magnetic conditions. The outer casing is made of self-extinguishing material ABS..
Check Stock