ReviewsAc Current Transducer

Miniature Current Switch,Current Sensing Switch,with Rails,Normally Open Amp Sensor Monitoring Relay AC 0-30A Detectable（M3050）

  • Multi-Purpose: M3050 AC with rails current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment..
  • Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-30A AC Rated load: [email protected] AC/DC..
  • High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
  • LED Indication: The action current is 0-30A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
Check Stock

JANSANE SCT-013-000 100A Non-invasive AC Current Sensor Split-Core Clamp Current Transformer

  • This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation..
  • This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
  • Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for....
  • Two Form of Output: current output or voltage output (burden resistor needed to add).
  • Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement and over-current protection.
Check Stock

Current Sensing Switch/Relay,AC Current Sensing Switch 0-200A Normally Open Current Sensor Monitoring Relay,Linkage PLC Signal,Overload Controller M3080）

  • Multi-Purpose: M3080 AC current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment..
  • Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-200A AC Rated load: [email protected] AC/DC..
  • High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
  • LED Indication: The action current is 0-200A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
  • ABS material: High-power MOS tube non-con....
Check Stock

LUCKY Fish Finder Transducer Mount Arm Kayak Bracket Transducer Mounting Arm Flexible for Boat Canoe Kayak Fishing

  • ◆ Designed for Kayak & SUP Fishing : The transducer mount arm is an easy way to mount fish finder transducers as well as other kayak accessories. It is the best way to protect your transducer from scratching or cracking when your boat is going through bottom complex terrain of waters. The transducer mount arm helps to adjust the sank depth of wired transducer compared to mounting the transducer to the boat hull..
  • ◆ 360° Flexible Arm : The extended length of the transducer mounting arm is 21inch. Since the arm is bendable, you could adjust the angle of the transducer mounting arm to your most favorable position. Although it is a flexible arm, it couldn’t be either easily bended by the slight force. It is a solid and hard metal stick covered by the rubber..
  • ◆ Easy Install & Remove : The design of transducer mount base cup is adaptable for various kayaks and small boats. You could fix it by its unique suction cup on any smooth surface. So you can switch the transducer mount arm to different kayaks as you like. Meanwhile, you could also fix the transducer mount arm by three screws if there are screw holes in your kayak. You could also use double sided s....
Check Stock

MALLORY SC110 TRANSDUCER, PIEZO, 2.9KHZ, 80DBA, 120V

  • Price For: Each Transducer Function: Alarm Tones: Continuous Supply Voltage Min: 30V Supply Voltage Max: 120V Operating Current Max: 19mA Sound Level SPL: 80dBA Resonant Frequency: 2.9kHz Color: Black RoHS Compliant: No.
Check Stock

MALLORY SC628ANR TRANSDUCER, PIEZO, 2.9KHZ, 95DBA, 28V , 12 Count

  • Price For: Each Transducer Function: Alarm Tones: Continuous Supply Voltage Min: 6V Supply Voltage Max: 28V Operating Current Max: 30mA Sound Level SPL: 95dBA Resonant Frequency: 2.9kHz External Height: 32.6mm RoHS Compliant: Yes.
Check Stock

85dBA Piezo Transducer (Speaker)

  • Price For: Each Transducer Function: Alarm Tones: Fast Pulse Supply Voltage Min: 6V Supply Voltage Max: 28V Operating Current Max: 16mA Sound Level SPL: 80dBA Resonant Frequency: 2.9kHz External Height: 32.6mm RoHS Compliant: No.
Check Stock

MALLORY SC628P TRANSDUCER, PIEZO, 2.9KHZ, 80DBA, 28VDC

  • Price For: Each Transducer Function: Alarm Tones: Continuous Supply Voltage Min: 6V Supply Voltage Max: 28V Operating Current Max: 18mA Sound Level SPL: 75dBA Resonant Frequency: 1.9kHz External Height: 32.6mm RoHS Compliant: No.
Check Stock

Faria 13751 Chesapeake Black Depth Sounder with In-Hull Transducer

  • Please confirm part will fit before ordering.
  • Current drain:90 mA max. with supplied transducer.
Check Stock

Autel MaxiSys MSOAK Oscilloscope Accessory: Work with MaxiFlash VCMI MSUltra MS919 & MP408, 65A&650A AC/DC Current Clamp, Coil On Plug Probe Included with Carrying Case Accessory Kit

  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】Autel MaxiSys MSOAK, compatible with the MaxiFlash VCMI included with the MSUltra and MS919, and the MP408 4-channel oscilloscope (sold separately), includes the 65A AC/DC Current Clamp, 650A AC/DC Current Clamp, Coil On Plug Probe, HT Extension Lead (2pcs) and Battery Clip (2pcs), within a blow-molded carrying case. To enable screen reader support, press Ctrl+Alt+Z To learn about keyboard shortcuts, press Ctrl+slash.
  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】 Includes 65A AC/DC Current Clamp, 650A AC/DC Current Clamp, Coil on Plug Probe, HT Extension Lead (2pcs) and Battery Clip (2pcs).
  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】The current clamp measures a maximum current of 65A with a frequency up to 20 KHz. It works with jaws that open to allow clamping around an electrical conductor. And the 650A AC/DC current clamp measures a maximum current of 650A with a frequency up to 400 KHz..
  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】COP Probe can catch the ignition waveform of automobile engine easily. The ignition waveform is a window, through which we can see what happened in the engine combustion chambers. It determines whether the ignition plug needs to be replaced or clea....
Check Stock

Canon PowerShot SX540 HS 20.3MP Digital Camera with 50x Optical Zoom + 64GB Delux Accessory Bundle

  • Multiple Outlet Wall Plug: 12 AC outlets with 1680J Surge protector wall mount, 15A Current Limit switch, Safety ground indicator Light, surge protection indicator light, 2 hanging hole for all types of Standard Electrical Outlets.
Check Stock