ReviewsAc Dc Complete Collection

Ernie Ball Volt Pedal Power Supply P06191

Direct Replacement for Atwood / HydroFlame Furnaces.
Replaces Part #s: 36680, 31377, 35050, 35052, 35054, 35137, 36133, 37716.
This sail switch designed for RV / Campers furnace.
Applicable to Models: 1522 2 STAGE, 1522 LD 2 STAGE, 2334 2 Stage, 2540 2 Stage, 7912-II, 7916-II, 7920-II, 8516-II, 8516-III, 8516-IV, 8520-II, 8520-III, 8520-IV, 8525-II, 8525-III, 8525-IV, 8531-II, 8531-III, 8531-IV, 8535-II, 8535-III, 8535-IV.
Applicable to Models: 8935-DC-I, 8935-AC-I, 8940-DC-I, 8940-AC-I, 8935-DC-II, 8935-AC-II, 8940-DC-II, 8940-AC-II, 8935-DC-III, 8935-AC-III, 8940-DC-III, 8940-AC-III.

LED: This Green LED will illuminate when input AC power has been applied to the unit and DC power is available.
Fuse: If the AC/DC primary circuit load or if the DC output load increases, causing the input AC current to the DC power supply to exceed the 2 Amp....
This will cause the DC power supply to loose all DC power output but AC power output to the NEMA 5-15 Receptacles will remain active.
This unit connects to a 120 VAC, 3 wire source and provides 6 DC outputs at 12 Volts.
NEMA 5-15 Receptacles: These two AC output female connectors will provide 120 VAC and UL rated at 15 Amps total.

4PCS LM2596HV AC/DC to DC Buck Step Down Converter Module 3v 3.3V 5V 6V 9V 12V 15V 24V DC 5V-50V Adjustable Step-Down 3A Power Supply.
Adjustable AC/DC to DC buck converter power supply module Voltage Regulator.
Input ac voltage AC5V~AC30V or dc5v-50v. Due to the large fluctuation of ac voltage, the recommended ac voltage range has been reserved..
The power module adopts plug-in LM2596HV, LM2596 version of high voltage, the highest input voltage is 50V(limited by filter capacitor voltage) with external radiator, can withstand high current work..
Input voltage range: AC 5V-30V, DC 5V-50V Output output range: DC 3.3V-33V.

Adjustable temperature range: -8°F to 50°F.
“Fast Freeze” mode rapidly cools to -8°F.
Voltage power AC (115V/ 60Hz – 70W/1.0A A) or DC (12V/24V – 5.2A /2.6A Car Lighter Socket).
unit can be plugged in with both AC power and the DC power at the same time. If both AC and DC are plugged in at the same time, then the unit will primarily operate on AC. If the AC power source fails, DC will become primary power supply source..
8-feet AC power cord and 10-feet DC power cord.
Tough and solid outer powder coated steel housing.
Wattage: 70 Watts. Net weight: 52 LB. Internal dimensions: 21" W x 10" L x 15" H including a compressor step with 7.25″ W x 7.5″ H.

Includes 2pcs of 12V, 225 lbs Linear Actuators (multiple stroke lengths available) with Mounting Brackets, AC to 12 VDC Power Supply, Remote Control Unit, and Wire with Locking Connectors.
See photo gallery for linear actuator technical specifications and a wiring schematic of the entire system. Extremely easy to wire and assemble using the included locking cable connectors..
Power Supply Specs: AC INPUT RANGE: 100-240 VAC DC OUTOUT: 12 VDC (5 amps maximum) ADDITIONAL INFO: 8ft AC extension cord included and 5ft DC extension cord included.
Remote Specs: POWER RATING: 5 amps REMOTE RANGE: 90ft maximum FREQUENCY: 433.92 Mhz OPERATING CURRENT: 15mA SWITCH TYPE: DPDT ON-OFF-ON.
Complete kit allows end user to power and remotely control the movement of the two included linear actuators.

The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
The 117 multimeter features true RMS for accurate measurements on non-linear loads.
The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.

T-Power (TM) Made with the highest quality / Input Voltage Range: AC 100V - 240V / OUTPUT : 12V DC 60W ( DC 11.0~18.0V compatible ).
Compatible With: Turnigy Accucel 6 Lipo A123 NiMH NiCd / Turnigy Accucel-6 50W 6A Balancer Charger LiPo LiFe NiMh NiCd JST-XH / ((King HKC6, HobbyKing 50watt 5A X-Charger/Balancer, and HobbyKing ECO6 50W 5A Channel Well Technology (CWT) for Turnigy Model: CAD060121 (newer version of PAA060F)) Tenergy TB6AC 50W/5A AC/DC Dual Power Balancing Tenergy B450AC 45W AC/DC Compact Balance.
Tenergy TB6AC 50W/5A AC/DC Dual Power Balancing Tenergy B450AC 45W AC/DC Compact Balance.
Compatible With: SKYRC iMAX B6 Mini Professional Skyrc Imax B6 Professional Rapid Lipro SKYRC iMAX B6AC V2 Dual Power (50Watts) LiPo,LiHV,LiIon,LiFe,NiCd,NiMH,Pb SkyRC Quattro 1S Lipo Micro Battery Charger ( FOR Micro/Micro Reverse/MX/mCPX ) Compatible With: SKYRC iMAX B6AC V2 Dual PoweriMAX B6AC Version 2 Digital LiPo LiIon LiFe GoolRC B6 Mini Professional Balance Charger/Discharger for LiPo Lilon LiFe NiCd NiMh Pb RC Battery.
❌ ((( NOTE ! THIS ITEM WILL NOT FIT : 80W Accucel 6 Digital charger High Power (80W) 10a ))).

The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
The 117 multimeter features true-rms for accurate measurements on non-linear loads.
The 117 multimeter features Low input impedance which helps prevent false readings due to ghost voltage.
The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non-linear signals.
The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.

The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
The 117 multimeter features true RMS for accurate measurements on non-linear loads.
The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.