ReviewsAc Drain Line Fittings

WISPAUSU AC Fuel Line Disconnect Tool Remover 7PCS Compatible with Ford GM Mazda More Vehicles, 1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch, Transmission Oil Cooler Line Removal Tool Quick Disconnect Tool Kit

Why Need It: WISPAUSU 7PCS AC Line and Fuel Line Disconnect Tool Set, help you quickly remove/disconnect fittings on Fuel lines, AC cooling lines and heater lines, transmission oil cooler line and other quick disconnect couplings..
Wide Applicability: 7 sizes of disconnect tools for various fuel lines and other quick disconnect couplings. Compatible with several Ford/ GM/ Mazda / Chrysler and more other vehicles with automatic transmission lines. (If your vehicles are not in the list please contact us and confirm).
What You Get: The 7-Piece Fuel Line Transmission Line Removal Tool includes 7 types of opening size, 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch (Please check the Outter Diameter of your fuel/oil/AC lines)..
Simple Operation: Made of hard plastic, resists fuels and solvents, durable and lightweight. Compact size, easy to grip and get the hard-to-reach lines. Place the notch of the tool against the line, and open the clamp with one push. Then you can get the line into the tool and disconnect..
Worry Free Purchase: Each tool is marked with permenat lable(Size: mm and inch) for easy identification. We offer worry-free 12-month warranty and friendly after-sales services. If you have any issues please feel free to contact ....

Check Stock

mistcooling System - Stainless Steel Tubing - 1500 PSI Misting Pump - Do It Yourself Misting System - for Residential, Commercial and Industrial - Up to 120 Nozzles (18 Ft Mist Line - 10 Nozzles)

1500 PSI Misting Pump with Stainless Steel Tubing, Stainless Steel Nozzles. Do it Yourself Misting System, easy to Install , comes with all parts. For Residential. Commercial and Industrial Misting Applications.
Base 10 Nozzle Mist Kit Includes: 1 - 1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5 micron filtration, Outdoor Rust Proof Enclosure with on/off Switch 18ft Stainless Steel tubing for push lock (Pre-cut 2ft sections), 22ft UV coated Flexible 1/4" feed line, 10- Nickel Plated Push Lock Misting Tees, 10- Stainless Steel Orifice Misting Nozzles (0.006"), 2- Nozzle plugs, 1 - Push Lock End Plug.
1500 PSI Pump Features :Inbuilt Filtration, Direct Drive, With Solenoid, Pressure Switch, No Water Cut off Switch, With By-Pass Valve, 50-60 DB, TEFC Motor , 110 V AC.
Easy to Customize, Easy to Install, Do it Yourself Misting, With Push Lok Fittings for Ease of Re-Use.
2 Ft Stainless Steel Tubing Pieces with Grooves makes it easy to use the System for Industrial Applications..

Check Stock

ASD 3/16 and 1/4 Brakeline fittings kit nuts unions compression fittings 70 Pieces

Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
Contains (5) 3/16″ OD Compression Brake Line Fittings.
Contains (5) 1/4″ OD Compression Brake Line Fittings.

Check Stock

16 Gram CO2 Cartridges Unthreaded - for Gallo Gun Drain AC Condensate Line Cleaner - 10 Pack

CO2 REFILL CARTRIDGES: 10 CO2 16gm cartridge for Gallo Gun to clean AC drain line condensate..
COMPATIBLE: Works with Diversitech Charles Gallo Drain Gun, and all standard 16 gram unthreaded compatible inflaters and adapters..
DURABLE: Highly sturdy replacement part..
EASY TO USE: Reloading the cartridges in the drain clog remover gun is a seamless process saving you time..
SAFE: 10 food grade non-threaded CO2 cartridges..

Check Stock

OEMTOOLS 25036 Bleed-O-Matic One-Man Brake Bleeder Kit, Featuring An Opaque Brake Bleed Bottle w/ Transparent Hoses and Tapered Fittings, No Mess Brake Fluid Bleeding (Packaging May Vary)

RELIABLE BRAKE BLEEDING TOOL: Our brake fluid bleeder kit features a reliable magnet for one-man operation.
Designed for use on calipers, wheel cylinders, and master cylinders to give you the most effective brake line bleeder kit for your budget.
NO MESS BRAKE BLEED: Get a tight fit over calipers with our tapered fittings and transparent brake bleeder hose of our brakes bleeder.
The transparent brake bleeder tubing ensures that you’ll know when the brake line is running clear and air-free.
ONE MAN OPERATION: No need to use the two-person method for your brake bleed.
Attach the one person bleeder's reservoir to the rotor or similar metallic vehicle surface with the strong magnetic attachment and pump the brake.
DURABLE BRAKES BLEEDING KIT: The quality construction of our 2 piece design gives you a durable no-mess operation.
Bleed brakes while keeping everything clean of caustic brake fluid.
Our handy reservoir makes disposal of brake fluid quick and easy.
FITS MOST VEHICLES: Our specially tapered fittings work on most vehicles.
The hoses hold firmly to the durable brake bleeder bottle and tapered fittings to create a no-mess operation that keeps your components clean of brake fluid.

Check Stock

Drainzit STAN1438 Oil Change Aid for Briggs & Stratton Tecumseh 3/8' Oil Port

Drainzit oil hoses make changing oil easier and cleaner. Drainzit is easy to install, simple to use and requires no engine modification. For use on nearly all equipment powered by small engines: pressure washers, generators, pumps/sprayers, compressors, lawn mowers and more. Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP Fittings convert to SAE wrench sizes Efficient - custom made metric fittings seal kit to.
Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP.
Efficient - custom made metric fittings seal kit to engine with O-ring.
Rubber retainer loop holds kit in place when not in use.

Check Stock

Ebb and Flow Hydroponics Control System Parts, 3/4'' Fill Drain, 10 Pack, Flood and Drain Irrigation Kit, Tools and Fittings, 388075

EBB AND FLOW FILL DRAIN – Ebb and Flow Drain Fittings, an essential part of your hydroponics supplies. Use as repair, replacement, or spare parts for your irrigation system..
INCLUDES – 3/4'' Fill Drain, 10 Pack. Threaded hydroponic watering system parts..
FOR IRRIGATION SYSTEMS – Ideal for use with reservoir and flood table irrigation setups for maximum functionality and efficiency. (Additional fittings may also be purchased separately)..
DURABLE – Automatic irrigation equipment parts made from heavy-duty and durable plastic that’s designed to last longer than other fittings and offer great value for money..
DELIVERS OXYGEN TO ROOTS – With higher oxygen levels in the root zone you will see improved growth from your plants and increased nutrient uptake, allowing you to maximize your yields..

Check Stock

Lisle 37140 Disconnect Pliers, 45 Degree

The Low Profile Design with 45° Bend Disconnects Fuel Line, EVAP Line Fittings and DEF Fittings in Hard-to-Reach Areas.
Low-profile design with 45° bend allows the tool to fit between the top of the fuel tank and vehicle.

Check Stock

IQIHUI 7PCS AC Fuel Line Disconnect Tool,AC Line Disconnect Kit,Transmission Oil Cooler Line Quick Disconnect Kit for Ford GM Mazda More Vehicles,Size1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch

【Material】Fuel line quick disconnect heater hose disconnection tools are made of hard plastic to ensure strength and sturdiness..
【Founction】Oil cooler pipeline quick disconnect kit, used to disassemble/disconnect fuel pipeline, heater pipeline, AC cooling pipeline and other quick disconnect fittings..
【Application】The AC fuel line disconnect tool is compatible for most Ford, GM, Chrysler and Mazda models. It is also suitable for some other vehicles, and the automatic transmission line is within the size range..
【Easy to use】The compact size is easy to grasp, and the inclined design allows access to hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
【Package】Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..

Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.

Check Stock

F-AL-3/8, 3/8″ Threaded Female Tank Filter for Mosquito Misting Systems

{Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
{Pump Specifications} 110 Volt Kit Includes: – 200PSI Booster Pump with Plug (110v) – 50ft Flexible Tubing – Calcium Inhibitor Filter – 12 Brass/Stainless Steel Mist Orifice Nozzles – 0.012” – 11 – Push Lock Mist Tees – 1 – Push Lock End Mist Elbow – 6ft Feed line with 3/4 Garden hose connector – Plastic Clamps.
{Installation} – Push Lock Fittings – Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
{Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
{Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/o....

Check Stock