ReviewsAc Magnetic Contactors

Surge Guard 40100 Basic Automatic Transfer Switch - 50 Amp

  • Time delay at power up. Connection type: Screw terminals.
Check Stock

Current Transducer, SZT15-CH-420E Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A,Stable Performance

  • 【DC Current Output Signal】 - The SZT15-CH-420E AC current transducer provides real-time isolated measurement of AC current in the grid or circuit and converts it to a 0-5V / 0-10V or 4-20mA DC current output signal ..
  • 【Withstand Voltage】 - Through-heart structure design, insulation withstand voltage up to 2000V AC. The measured current AC: 0-10A / 20A / 50A can be selected..
  • 【Usage】 - Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions. The current transducer is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems..
  • 【High Performance】 - The outer casing is made of self-extinguishing material, it has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability..
  • 【Easy To Installation】 - There is no need to connect the dc series into the circuit during measurement, safe isolation of input and output. It is suitable for various applications requiring current and voltage conversion..
Check Stock

MF-30K AC/DC Gauss Meter with Certificate Measures Magnetic Fields Strength and Pole Residual Magnet Permanent Integrated High AC ElectroMagnetic Fields Level Measurement

  • ✔ DC Digital Magnetic gauss meter fields measurement up to 30000 Gauss or 30000mT (mili Tesla). AC Magnetic fields measurement up to 15000 Gauss or....
  • ✔ Magnetometer and Temperature measurements and display. Useful function to measure magnetism in a specific environment temperature..
  • ✔ Measures and detects the following: AC magnetic levels, industrial strength magnet tester, magnets and magnetic pole detector, DC Magnet,....
  • ✔ Data recording and USB interface to send data + PC connection application software, real time function. GO and NO-GO alarm and alarm value set up....
  • ✔ Calibration Certificate included and one year warranty..
Check Stock

NR2-93 Thermal Overload Electric Overload Relay Motor Protection Thermal Overload 50-60hz (37-50A)

  • 10.0 - 16.0 Amp, IEC, Overload Relay, Type: Thermal Bi-Metallic. Trip Class 10. Selectable Manual or Automatic Reset. For use with XT Series, Frame D Contactors..
Check Stock

Tanscos Stud Finder Wall Scanner - 6 in 1 Electronic Stud Sensor, with Digital LCD Display & Sound Warning, Magnetic/Non-Magnetic Metal Detection, Wood Studs/Joists/Pipes/AC Wires Detector

  • ... with high sensitivity to penetrate deep into the wall to detect different materials. Tanscos stud finder locates center and edges of wood metal studs up to 1/2 inch (13 mm) deep,1 inch (25mm) deep and 1.5 inch (38 mm) deep in drywall. And AC scan mode can detect unshielded live AC wire up to 2 inches (51mm) deep..
  • [Magnetic/Non-Magnetic Metal Detection Up To 80mm] This wall detector has an innovative design that helps confirm magnetic and non-magnetic metal up to 3.15inches deep by microwave. The screen will show "X" if it detects a non-magnetic metal and no "X" will pop up if it’s magnetic. All these will give you more detection choice and avoid you from drilling mishaps..
  • [Efficient LCD Display & Sound Warning & Auto Calibration] The wood detector features HD LCD display that enables displaying readings clearly.
  • and it would give a clear big sound when you find center of wood metal studs. A correct calibration before each detection could ensure you more reliability and accuracy. Please make sure you didn’t calibrate it on the stud position accidentally. Then just move it around as you need and it would make your project better and efficiently..
  • [Ergonomic Design for Wide Application] The ergonomic anti-slip grip provides users with comfort and con....
Check Stock

Packard - DP301202 C230B 2 Pole 30 Amp Contactor, 120 Voltage Coil

  • Compatible with: C230B/ TJT30A120V2P/17325/PC230A/H230A/90-244.
  • In accordance with U. L. bulletin no. 508 “industrial control equipment”.
  • Contactors meet specifications for devices up to 600 VAC.
  • Coils have class b insulation. Resistive Amps : 40.
  • Includes lug, spade terminals, and covers.
Check Stock

20 in. x 20 in. x 1 in. Basic Household Pleated Air Filter (3-Pack)

  • This is a Brand New Upgraded 1 Pole 30 Amp Condenser Contactor.
  • This contactor is rated for 30 amps, meaning it is an upgrade for old 25 amp contactors.
  • The coil is rated for 24 volts- It also has a sealed contact!.
  • This contactor will work with 99% of residential units!.
Check Stock

Fluke 3000 FC GM Wireless General Maintenance System Multimeter

  • Wireless general maintenance system kit with a digital multimeter, voltage modules, and flexible current module and probe for measuring AC and DC voltage and current, continuity, resistance, diode test, capacitance, and frequency.
  • Modules can be connected to a test point, and results can be viewed up to 20 meters away on the multimeter.
  • Kit includes a 3000 FC series wireless multimeter.
  • A3001 FC wireless iFlex AC current module.
  • The Fluke 3000 FC Series Wireless Multimeter with the Fluke Connect app has all the essentials for convenient test and measurement troubleshooting.
Check Stock

115/230VAC Pulling Electric Winch with 11.0 fpm and 2000 lb. 1st Layer Load Capacity

  • All brass (no corrosion) series wound that is double sealed.
  • Sealed waterproof 600 amp contactors and steel contactor cover for added protection.
  • Double sealed drum (gearbox/motor) and sealed 3 stage planetary gears as well as aluminum fairleads and integrated wireless remote.
  • Fully sealed to Ip68 standard and tie bars reinforced with steel body.
Check Stock

Current Transmitter SZT20-CH-420E Current Transducer Transmitter Transformer Sensor AC Current Converter 0-200A

  • Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output.Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions..
  • The measured current AC: 0-10A / 20A / 50A, 0-100A / 150A / 200A can be selected.Output signal DC: 0-5V / 0-10V /4-20mA three forms are available..
  • Installation and using are easy and convenient, there is no need to connect the dc series into the circuit during measurement.Through-heart structure design, isolation withstand voltage up to 2000V AC..
  • The outer casing is made of self-extinguishing material, safe and durable.It is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems..
  • It is suitable for various applications requiring current and voltage conversion.It has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability..
Check Stock

NEW TeSys LRD thermal overload relays LR-D16 LRD16 9-13A Class 10A

  • Class 10 Ambient Compensated Overload with Phase Loss Protection..
  • New Aftermarket Replacement for Telemecanique Overload Relay including a 1 year warranty..
  • "12-18A Adjustable Overload Mounts to NC1- D12, D18, D25 or D32 Contactor".
  • Series LR overload relays are intended and UL recognized for use with US Breaker NC1D contactors..
  • Telemecanique parts are provided to assist selection. Select products according to each applicaion..
Check Stock